Honeycomb Panel

Aluminum Honeycomb Stone Panel for Wall, Ceiling and Roof Wall Decoration

Detailed Photos Stone Honeycomb Panel is a fabricated stone panel wall cladding system utilizing a composite panel made by laminating a natural stone layer to an aluminum honeycomb panel with aviation grade epoxies. Alucrownstone is fabricated and then attached to the wall with a series of aluminum extrusions. Alucrownstone can feature a large range of natural stone finishes, including granite, marble, limestone and sandstone. The natural stone composite panels are suitable for interior and exterior use, being highly weatherproof and suitable for high impact areas. Product Parameters Item Description Natural stone Aluminum honeycomb panel Photo Composite Natural stone + Glue + Porcelain/aluminum honeycomb panel base Stone type Marble, Granite, Sandstone, Limestone ,etc Stone Thickness 3-5mm natural stone veneer Total thickness 8-100mm, can be customized Surface Polished/ antique/ flamed/ brushed Standard size 300*300mm, 300*600mm,600*600mm,600*900mm,1200*2400mm, other can be customized Weight 22kg/m2(15mm thickness) Application Building wall decoration, floor, table, ship, etc Package Protective film with foam and plywood crate Stone honeycomb panel specification Face sheet: 3-10mm natural stone veneer Total thickness:10-35mm Maximum size: marble honeycomb panel 1500*3000mm, granite honeycomb panel 1200*2400mm Granite:5.74 pounds/sq.ft (28kg/sq.m), 1/2 weight of 2cm granite slab Marble: 5.33 pounds/sq.ft (26kg/sq.m), 1/2 weight of 2cm marble slab Special size & shape: can be customized according to project's drawing Application More Finish Option Disclaimer: Please note stone is a natural product. As a result, no two pieces are identical and may vary in markings, colour and texture. In some stones it is common to find spots, fossils or shelly formations, pit holes, open texture streaks, iron spots, and grain formation changes. TECHNICAL DATA NO. ITEM STANDARD TESTED VALUE RESULT 1 Flat Bonding Strength Average ≥ 1.0 MPa; Minimum ≥ 0.6 MPa Average 1.31 MPa; Minimum 0.88 MPa Pass 2 Flat Tensile Strength ≥ 0.8 MPa 0.91 MPa Pass 3 Flat Tensile Modulus ≥ 30 MPa 70.7 MPa Pass 4 Flat Shearing Strength ≥ 0.5 MPa 0.54 MPa Pass 5 Flat Shearing Modulus ≥ 4.0 MPa 6.43 MPa Pass 6 Bending Strength ≥ 8.0 MPa 41.0 MPa Pass 7 Bending Rigidity ≥ 1.0 x 10^9 N.mm^2 2.86 x 10^9 N.mm^2 Pass 8 Shearing Rigidity ≥ 1.0 x 10^5 N 4.40 x 10^5 N Pass 9 Climbing Drum Peel Strength Average ≥ 50N.mm/mm; Minimum ≥ 40N.mm/mm Average 9.1N.mm/mm; Minimum 42.4NN.mm/mm Pass 10 Fasten Fitter Loading Capacity ≥ 3.2 kN 3.2 kN Pass Our Advantages Why use Crownstone over traditional solid stone?? 1.Lightweight-Crownstone is only 1/5 of the weight of its equivalent in traditional stone. This means that the product is much easier to handle and to ship, lessening damages, and improving onsite efficiency and safety. 2,Simpls installation-Crownstone offers far improved attachment over traditional solid stone. The solid stone anchoring system exposes the weakest properties of the stone, whereas the fixing systems offered with Crownstone are rapid and align with common systems already used in Australia. 3,Flexibility-Alucrown panels, using stone as a veneer over the honeycomb core are much flexible than dimensional stone. As a result the panels are much less prone to fracturing and cracking and better able to withstand building movement and extreme weather events. 4,Stability-The thin stone found on Alucrown panels lack the torsional force the thicker traditional stone. This means the lightweight Alucrown systems doesn't experience the stability failure that occurs in traditional stone.