Abrator

Q3720 Hanger Type Shot Blasting Machine for Bycicle Frame

Q37 single hook type shot blasting machine / hook shot blasting equipment Hook type shot blasting machine product desctiption This machine is for surface cleaning or strengthening treatment of small castings, forgingparts in industry of foundry, building, chemical, motor, machine tool etc. It is special for surface cleaning and blasting strengthening on various types, small production castings, forging parts and steel construction parts for clearing little viscous sand, sand core and oxide skin. It is also suitable for surface cleaning and strengthening on heat treatment parts, especially for cleaning slightness, thin wallparts which is not suitable for impact. Q37 hook type shot blasting machine Product Parameters Model Q376(customizable) Maximum weight of cleaning(kg) 500---5000 Abrasive flow rate(kg/min) 2*200---4*250 Ventilation on capacity(m³/h) 5000---14000 Lifting amount of elevating conveyor(t/h) 24---60 Separating amount of separator(t/h) 24---60 Max overall dimensions of suspender(mm) 600*1200---1800*2500 Spinner Hanger Hook System Spinner Hanger Hook: To hang work pieces or tooling Driving Motor: To drive spinner hanger hooks to rotate&move along rails into or out. Overhead Rails: T shaped is for one hook and Y shaped is for two hooks Rotating & Blasting Time: 3-5 minutes according to different work pieces Blasting Chamber Blasting Wheels: Mounted on left side wall of blasting chamber. Angle will be customized according to work pieces. Hot Area: Right inside of blasting chamber is called hot area protected by Mn alloy liners. Doors: Manual or pneumatic type are available. Abrasive Recycling System Screw Conveyor: Mounted at basting chamber bottom to collect used steel shots and deliver to bucket elevator. Bucket Elevator: To lift up used sheet shots to separator. Separator:To separator qualified steel shots and grits by screen filtering and ventilation filtering. Dust Collection System Fan: Suck dust from blasting chamber through pipes. Gravity Dust Collector: Catch big particle size dust by gravity as first sate dust collection. Dust Collection: Bag type & cartridge type according to different filters. Efficiency: 99.9% Electric Control System Model: Automatic ( manual type is available). Control Unit: PLC. Emergency Stop: on main control panel and rollers conveyors. Power Indicator: available on control panel. High cleaning effect This machine use 2 sets electric hoists, hooks with invert and rotation function, the workpiece can be blasting while rotating. Q37 Hook type shot blasting machine shot blasting sample Main Features This series is hook type shot blasting machine, is mainly used for surface cleaning of casting, structure, non-ferrous and other parts. This series shot blasting machine have many types, such as single hook type, double hook type, lifting type, non-lifting type. It has advantage of non-pit, compact structure, high productivity, etc. 1). The equipment is mainly applied in the processing of medium and small size workpieces in large scale. It has the advantage of high efficiency, compact structure. 2). Workpieces can be transported continuously. The working procedure is that, setting the speed, hanging workpieces over the hooks, and removing them after shot cleaning. 3). Each single hook can hang weight from 10 kgs to 5000 kgs with high productivity and stable running. 4). It makes a best effect on complicated workpieces both the surface and inner part, such as cylinder cap of engine and motor casing. 5). It is an ideal choice for auto, tractor, diesel engine, motor and valve industry. Our Company Our customers Warmly welcome you to visit us in Qingdao.

Automatic Feeding Track Type Shot Blasting Machine for Remove Surface Rust

Automatic Feeding Track Type Shot Blasting Machine for Remove Surface Rust Product Parameters Track end disc diameter φ1000 mm Track speed 3.5 rpm Single piece weight for cleaning workpieces 30kg Maximum loading capacity of drum (easily flipped parts) 600kg Productivity 2000-2500kg/h Shot blaster Q034 (1) Quantity 1 (2) Impeller diameter 4420mm (3) Blade width 80mm (4) Shot blasting capacity 250 kg/min (5) Shot blaster power 15 kW Track transmission mechanism (1) Transmission speed 0.1m/s (2) Motor power 4kW Elevator (1) Increase by 15T/h (2) Power 2.2kW separator (1) Separation capacity of 15T/h (2) Required air volume 1500m3/h Hanging door (1) Walking speed 180mm/s (2) Motor power 0.75kW Bottom spiral (1) Conveying capacity of 15T/h Feeding machine (1) Maximum load capacity 600kg (2) Motor power 3kw Product Description Function Overview QR3210 automatic feeding track type shot blasting machine can not only remove rust on the surface of workpieces, but also clean up various rust, dirt, etc. on workpieces, improving the surface quality of workpieces; At the same time, it can also improve the internal stress of the workpiece, achieve the purpose of strengthening, and enhance the fatigue strength of the workpiece. In order to remove rust, oxide skin and other debris from the surface of the vehicle body, and to achieve a certain roughness of the cleaned surface after cleaning, the adhesion between the paint film and the surface of the vehicle body is enhanced, thereby improving the corrosion resistance and surface quality of the vehicle body. Characteristic 1. It can complete functions such as loading, rotating and flipping the workpiece for shot blasting cleaning, unloading, and dust removal; 2. The cantilever centrifugal shot blaster with high blasting speed produced by combining foreign technology can significantly improve cleaning efficiency and achieve satisfactory cleaning quality; 3. The arrangement of the shot blasting chamber and shot blasting device is determined through computer 3D dynamic shooting simulation, so that the coverage area of the ejected projectile flow accurately covers the surface of the workpiece, and the projectile is simultaneously thrown towards the surface of the workpiece from all directions; 4. The machine has a novel design concept, a compact structure, and is easy to use and maintain; 5. Adopting the popular form of no pit, saving the construction cost of pit foundation; Equipment composition and structural characteristics This QR3210 automatic feeding track type shot blasting machine mainly consists of a cleaning room, rubber tracks, suspension doors, shot blasting machines, feeding mechanisms, elevators, screw conveyors, magnetic separation systems, dust removal systems, electrical systems, and other parts. This machine increases the amount of shot blasting, improves the ability and separation effect of the shot sand separation system. Usually, wind and magnetic separation methods are used, and the separated old sand can be directly reused. Company Profile Taizhou Chuzhou Electromechanical Equipment Co., Ltd. which is located in yuhuan city, Zhejiang Province . The company is a professional production, sales of brass valve sanitary ware machinery and equipment group company. We have 5 factories, mainly producing machines for copper valves sanitary ware products : automatic hot forging Trimming Machine , shot blasting machine, automatic polishing machine, automatic CNC machine tool, automatic assembly machine, whole line processing and testing equipment . We have a group of professional engineers in charge of technology, manufacture, installation and testing, so we can guarantee the good performance of our machines. We can

Fully Automatic Steel Plate Pipe Shot Blasting Painting Machine Production Line

Fully automatic steel plate pipe shot blasting painting machine production line Product Description The Steel plate is mainly used for surface treatment (namely preheating, rust removal, paint spraying and drying) of steel plate and various structural sections, as well as for cleaning and strengthening of metal structural parts. The steel plate preservation line is mainly composed of three parts: shot blasting, paint spraying and drying. According to the user's production needs, shot blasting can be performed on a standalone machine, or the continuous operation of preheating, blast cleaning, paint spraying, and drying can berealized. The steel pretreatment line adopts programmable controller PLC to coordinate the work of the whole machine, which greatly improves production efficiency. 1. Shot blasting machine ☆Transportation system: Roller conveyor system, width: 500-4500mm, load capacity: 300-10000kg. ☆Blast turbine: Power of motor : 7.5-30kw Number of turbine: 4-16 ☆Intelligent abrasive dosing system: Service time max 20% longer, energy saved max 30%. ☆Dust collector: Settling chamber +cartridge-type dust collector Cartridge filter service time: 5 years 2. Painting booth The workpieces after derusting enters the painting booth, and sprays the maintenance primer on the workpiece surface through the spray gun installed on the upper and lower painting cars. 3. Dry chamber The drying chamber is composed of a chamber body, an electric heating device, a fan, a plate chain conveyor, etc. The room is composed of box structure, it can be disassembled if necessary during maintenance. One end of the room body is connected with the spray paint room, V type structure conveyor transport the work piece into the drying room for drying after the spray painting. The V type structure of conveyor synchronous running with the workpieces greatly reduce the contact area with the painted workpieces, which greatly avoid film damage during drying and transportation. Product Parameters Type unit QGBP1000 QGBP1500 QGBP2000 QGBP2500 QGBP3000 QGBP5500 Effective blasting width mm 800 1300 1800 2300 2800 5300 Dimension of entrance(W×H) mm 1000×300 1500×500 2000×500 2500×500 3000×600 5500×600 Work speed to achieve a cleaning of Sa2.5 ISO8501 m/min 0.5~3 0.5~3 0.5~3 0.5~3 0.5~3 0.5~2 Number of wheels×power kW 4×7.5/11 4×11/15 8×11/15 8×11/15/18.5 10×15/22 20×22/30 Number of painting gun pcs 2 2 2 2 4 4 If the parameters is not suitable for your workpiece, please tell us the following infromation: 1) What kind of workpiece will you clean? 2) The size of workpieces(length, width and height of maximum workpiece,Length, width and height of minimum workpiece?) 3) How many the weight of maximum and minimum workpiece? 4) Please tell us your requirement cleaning efficiency? We can customize the most suitable machines acccording to your workpieces. We can design and manufacture different size of steel plate preservation line according to customers' requirement. Detailed Photos Effect Packaging & Shipping ☆Delivery time: 40-60 working days After Sales Service One-to-one after-sales installation service Online Video guidance Installation engineer guidance at customer's site Company Profile Qingdao Qinggong (Seth) Machinery Co., Ltd is located in Qingdao Industrial Park, providing perfect solutions for shot blasting machine, preservation linesandblasting room and spray booth to users around the world. QGMA adheres to the concept of efficient, intelligent, creative, environmen-tal protection and compatible product development, insist on the st

Hanger Type Automobile Wheel Shot Blasting Machine

1. Product Description Hanger type shot blasting machine mainly consists of blasting chamber, blast wheel, workpieces transport system, screw conveyor, bucket elevator, separator, dust collector, electric control system and others. Hanger type shot blasting machines are designed to blast castings, welded pieces, forgings, etc. They are especially suitable for blasting sensitive pieces that may not strike one another during a shot blasting procedure. Workpieces are placed in workpiece holders or are suspended directly from the running gear's rotating hook. The workpieces are then pushed into position in front of the blasting machine. After the blasting program begins, the machine door is automatically or manually closed and electric-pneumatically locked. As the workpieces rotate, they are blasted at different blasting stations according to the pre-set blasting times. The abrasive is continuously cleaned, recirculated and reused. An abrasive metering device feeds the cleaned abrasive from the abrasive storage bunker to the high-performance turbines. The dust collector unit creates the partial vacuum necessary to maintain the dust-free operation of the blasting unit. 2. Operation Process of Hanger Type Shot Blasting Machine The workpiece to be shot blasted can be directly hung on the hooks, and operate the control system brought to the traction system at the front of the shot blasting chamber, and then the hooks with the workpiece automatically enter the shot blasting chamber. After the hook enters the shot blasting chamber, the door of the shot blasting chamber will be closed pneumatically and electrically interlocked to prevent others from accidentally opening the door of the shot blasting room when the workpiece is being shot in the shot blasting room. The hook enters the shot blasting chamber to reciprocate and rotate back and forth at the set interval position so that the workpiece is fully ejected and the dead angle of ejection is reduced. Two hooks and one hook are projected in the shot blasting chamber, and the other hook can load and unload the workpiece. The shot blasting time can be adjusted according to the workpiece. After the shot blasting machine stops running, the door of the shot blasting chamber is opened to bring in and out the workpiece. The dust generated in the shot blasting process is filtered and discharged by the secondary dust collector. The application of Hanger Type Shot Blasting Machine as follows: Blast cleaning welded steel fabrications, deburring and homogenising diecast parts, peening dynamically stressed components, removal of mill and forge scale as well as rust, removal of burrs and scalesIncrease of surface roughness, shot peening to increase fatigue strength. 3. Features: Versatile transport technology Highly efficient blast wheels Multiple machine sizes and variations available 4. Specifications of Hanger Shot Blasting Machine Type HB 7/12 HB 10/16 HB 12/18 HB 14/22 HB 16/23 HB 18/25 HB 30/30 Max. diameter of workpiece (mm) 700 1000 1200 1400 1600 1800 3000 Max. height of workpiece (mm) 1200 1600 1800 2200 2300 2500 3000 Max. weight of workpiece (kg) 500 800 1000 2000 3000 5000 10000 Number of wheels 2 2 2 3 3 4 5 Power per blast wheel (kW) 7.5 7.5/11 11/15 7.5/11/15 7.5/11/15 7.5/11/15 7.5/11/15 We have ten-year exporting experience to foreign countries. If you also want to start a new business or expand your business, please don't hesitate to contact us. We promise to provide you with the best suitable Surface treatment solutions.

Crawler Tumble Belt / Wire Mesh/ Hook Type/ Casting Metal Parts / Gas Cylinder / Auto Parts / Steel Pipe / Steel Plate Shot Blasting Machine

Road Surface Shot Blasting Machine for Cleaning Road Surfaces, Bridge Decks, Airport Runways, and The Inner Walls of Large Pipelines

Zmde China Shandong Factory Steel Factory Steel Plant Use Advanced H Beam Sand Peening Machine with Durable Steel Balls for Steel Beam Polishing and Cleaning