Machine Oil Purifier

Insulation Oil Regeneration Equipment Vacuum Transformer Oil Recycling Machine

Product Description Application: The Oil regeneration system (Series ZYD-I) has been specially designed for on site use to completely regenerate insulating oils in energized or de-energized transformers. The ZYD-I system provides regular oil purification such as degassing, drying and particulate removal but also can remove acidity, sludge, other soluble oil decay products and discoloration. This is accomplished by the use of high vacuum degasification technology and particulate filters combined with our special brand of earth. After treating, the oil can be reused as new. Features: 1.The plant is delivered ready for operation. 2. Degassing, dehydration and filtering process if various kind of insulation oils in electrical transformers and circuit breakers through put in one or several passes 3. There are two vacuum pumps for plant ZYD-I (one is the vacuum pump, other one is the booster roots pump), which can improve the vacuum value highly. Making sure the water-content of the treated oil is less than 3 PPM. 4. All oil treatment plants, type ZYD-I are equipped with an automatic Anti-Foam Control System. 5. The plant is equipped with built-in control and safety devices, which provides for a maximum operating security. 6. Minimised power consumption through optimised degassing (excellent efficiency factor). 7. Standardized filter housing for 1 micron , 5 micron, 20 micron and 80 micron filter cartridges. 8. Automatic supervision of the degree of contamination of the fine filter cartridges 9. ZYD-I can evacuate the vacuum for the electric equipments separately, such as the transformer. Also it can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state. 10. The machine adopts the double-infrared liquid automatic controller, pressure automatic-protector which can make sure the machine works online for 150 hours continuously without person. So it is a reliable and high automatically machine. 11. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 12. Functions of live line work on-site, vacuum drying and vacuum oiling. 13. Operational can be P.L.C (Programmable Logic Controller). (optional) 14. On-line water content measuring device (optional) 15. Regeneration system BZ with special brand of earth can remove acidity, sludge, other soluble oil decay products and discoloration Product Parameters Parameter Unit ZYD-I-30 ZYD-I-50 ZYD-I-100 ZYD-I-150 ZYD-I-200 ZYD-I-250 ZYD-I-300 Flow rate L/h 1800 3000 6000 9000 12000 15000 18000 Work vacuum MPa -0.08~-0.099 Work pressure MPa ≤0.3 Temperature ºC 20 ~ 80 Power 3 ph 380V 60Hz (Or as needed) Working noise dB(A) 75 75 75 75 80 80 80 Heating power kW 30 30 45 60 75 90 120 Total power kW 35.5 37.5 52.5 71.4 86.5 102.5 135 Oil Inlet/Outlet mm φ25 φ32 φ42 φ50 φ50 φ60 φ60 Weight Kg 600 800 1050 1400 1800 2000 2200 Size Length mm 1050 1100 1200 1450 1600 1800 1900 Width mm 750 800 950 950 1100 1200 1200 Height mm 1350 1400 1500 1650 1800 1900 1900 Item Unit After treatment Breakdown Voltage kV ≥75 Moisture content PPM ≤3 Gas content % ≤0.1 Impurity size micron ≤1 (no free carbon) IFT dynes/cm ≥40 Acid value mg KOH/g ≤ 0.03 Dielectric loss factors tgδ(90ºC) ≤0.001 Reference Images Company Profile Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Ch

Advanced Marine Engine Oil Purifier and Filtration System

Waste Oil Filtration Machine, Transformer Oil Recycling Purifier/Refinery Plant

China High Quality Carbon Steel Vkvp100 Vacuum Oil Purifier, for Sale

Zja Series Transformer Vacuum Oil Purifier

Construction Machinery Parts Fuel Filter 26560163