Mass Transfer Equipment Parts

1,079 results for Mass Transfer Equipment Parts

High Quality Stainless Steel 304 316 Random Packing 25mm 38mm Tower Metal Pall Ring

US$225.00-305.00 / cube meter
1 cube meter  (MOQ)
Product Description Description Pall ring is a open-hole ring packing,which high and diameter is the same and with 5 ligules toward inside at every floor. Usually the open surface is 30% of t

Metal Pall Ring Column Tower Packing Stainless Steel 304 316L Pall Rings

US$500.00-800.00 / m3
1 m3  (MOQ)
Product Description Introduction Metal Pall Ring, has features such as thin wall, heat resistant, high free volume, high capacity, low resistance, high separation efficiency and so on. It is especia

10mm, 25mm, 38mm, 50mm 76mm Tower Packing Metal Pall Ring for Rectifying Chemical Tower

US$225.00-305.00 / cube meter
1 cube meter  (MOQ)
Product Description Description Pall ring is a open-hole ring packing,which high and diameter is the same and with 5 ligules toward inside at every floor. Usually the open surface is 30% of t

SS304 SS316L 8mm 16mm 25mm 38mm 50mm 76mm Stainless Steel Metal Random Packing Pall Ring

US$225.00-305.00 / cube meter
1 cube meter  (MOQ)
SS304 SS316L 8mm 16mm 25mm 38mm 50mm 76mm Stainless Steel Metal Random Packing Pall Ring Product Description Description Pall ring is a open-hole ring packing,which high and diameter is the

450y Type SS304 Metal Structured Packing

US$300.00-600.00 / Piece
1 Piece  (MOQ)
450Y Type SS304 Metal Structured Packing Product Description Uniform Liquid Distribution In order to achieve even liquid distribution over the packing it is a must to have a good liquid distrib

Metal Corrugated Grid Packing

US$2,000.00 / cbm
1 cbm  (MOQ)
Product Description Metal Corrugated Grid Packing: It is a new designed Structured packing for extraction tower,which is assemble of two or over two grid packing units. It is usually install Extract

Column Tray Clamps Fasteners and Other Hardwares

US$1.00-100.00 / Set
1 Set  (MOQ)
Product Description Saiptech's Hard Wares of Tray Clamps Manway Lock clamps and Stud ----for site installation, replacment, maintenance and spareparts As a turnkey solution provider,

Imtp 50mm Metal Rectangular Saddle Ring

US$399.00-800.00 / m3
1 m3  (MOQ)
Product Description High Quality Metal IMTP Ring Intalox Saddles Ring for Distillation Tower Metal Intalox Saddle IMTP was developed by the United States Norton, between the shape of its saddle-shap

Liquid and Gas Separating Wire Mesh Mist Eliminator

US$110.00-550.00 / Cubic Meter
1 Piece  (MOQ)
Product Description Liquid and Gas Separating Wire Mesh Demister Pads Mist elimination devices including mesh pad demisters ,vane type mist eliminators and liquid coalescers for separation of e

20mm 25mm 30mm Interval Between Baffle Plates Mist Eliminator Filter China Factory FRP Cellular Drift Eliminators for Cooling Tower

US$500.00-600.00 / Piece
1 Piece  (MOQ)
FRP Demister China Factory Plastic C Shape and S Shape High Filtering Efficiency Efficient Demister FRP Demister FRP Demister stands for Fiberglass Reinforced Plastic Demister, and it is a type of

Acid and Alkali Corrosion Resistance Ceramic Liquid Distributor with Cap for Tower Internals

US$100.00-1,000.00 / Piece
5 Pieces  (MOQ)
Ceramic liquid distributor has a rough and uneven appearance, with many pore sizes ranging from 6 to 10 millimeters. The product is bowl shaped, with ventilation holes spaced in the middle of the dist

PP Rpp Plastic Demister Vane Type Demister/Mist Eliminator Also Known as Baffled Type Mist Eliminator/Demister

US$1,000.00-1,500.00 / Piece
1 Piece  (MOQ)
Plastic Demister C Shape and S Shape Mist Eliminator FRP PP Plastic Demister Vane Mist Eliminator Specification Mist eliminator is deducted the hot humid air from the midst of the small droplets

Stainless Steel Knitted Wire Mesh Filter Mist Eliminator

US$200.00-400.00 / cubic meter
1 cubic meter  (MOQ)
Product Description Metal Wire Mesh Demister Products Introduction Metal Wire Mesh Demister is a gas-liquid separation device, and the gas passes through the wire pad of the demister to remove th

Ss Pall Ring Metal Random Tower Packing Stainless Steel Pall Rings

US$225.00-305.00 / cube meter
1 cube meter  (MOQ)
SS316L SS316 SS304 Ss410 Carbon Steel Stainless Metal Random Pall Ring for Tower Packing Product Description Pall ring is a open-hole ring packing,which high and diameter is the same and with 5 ligu

Replacement Hardwares for Mass Transfer Applications

1 Piece  (MOQ)
HARDWARE FOR MASS TRANSFER TRAYS As a turnkey solutions provider, Saiptech is committed to detail. If you need replacement hardware to suit your mass transfer applications, we can provide y

Professional Manufacture Wire Mesh Mist Eliminator for Gas and Liquid Separation Tower

US$360.00-550.00 / Cubic Meter
1 Piece  (MOQ)
Jiangxi Aite Mass Transfer Technology Co.,Ltd continue to improve our core competiveness. It is committed to the R & D and manufacturing of more than 100 kinds of products such as plastic packing, met

High Capacity Tower Packing Stainless Steel Retaining Ring SS304 Ss3

US$560.00-600.00 / m3
1 m3  (MOQ)
Products Introduction of Metal Pall Ring Metal Pall Ring packing use of sheet metal by punching in the ring out of the wall with two rows of fenestrae with leaves. Fenestrae in each row there are

Metal Grid Packing

US$2,000.00 / cbm
1 cbm  (MOQ)
Product Description metal grid packing: It is a new designed Structured packing for extraction tower,which is assemble of two or over two grid packing units. It is usually install Extraction section

0.2-1mm Thickness Demister Mesh China Manufacturers Plastic FRP Cellular Drift Eliminator for Counter Flow Cooling Tower

US$500.00-600.00 / Piece
1 Piece  (MOQ)
FRP Demister China Factory Plastic C Shape and S Shape High Filtering Efficiency Efficient Demister FRP Demister FRP Demister stands for Fiberglass Reinforced Plastic Demister, and it is a type of

Plastic Demister C Shape and S Shape Mist Eliminator FRP PP Plastic Demister Vane Mist Eliminator

US$1,000.00-1,500.00 / Piece
1 Piece  (MOQ)
Plastic Demister C Shape and S Shape Mist Eliminator FRP PP Plastic Demister Vane Mist Eliminator Specification Mist eliminator is deducted the hot humid air from the midst of the small droplets d

Customized Mist Eliminator 300-6000mm Diameter Demister Pad

US$200.00-400.00 / cubic meter
1 cubic meter  (MOQ)
Product Description Metal Wire Mesh Demister Products Introduction Metal Wire Mesh Demister is a gas-liquid separation device, and the gas passes through the wire pad of the demister to remove th

Distillation Packing Wire Gauze Structured Packing 125y

US$299.00-1,999.00 / Piece
1 Piece  (MOQ)
Distillation Packing Wire Gauze Structured Packing 125Y 1. What is the role of structured packing in high vacuum distillation column? It is a widely used liquid mixture separation operation in

High Temperature Resistant Vertical Drift Eliminator Demister Mist Eliminator for Scrubber Vessel

US$30.00-350.00 / Cubic Meter
1 Piece  (MOQ)
Product Description High Temperature Resistant Vertical Drift Eliminator Demister mist eliminator for scrubber vessel Mist elimination devices including mesh pad demisters ,vane type mist elimi

Vsp Random Packing for Chemical Industry

US$100.00-1,000.00 / Piece
1 Piece  (MOQ)
Saiptech's VSP Random Packing Plastic VSP Packing is featured with High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small spec

Heat Transfer Media Ceramic Snowflake Ring

US$350.00-420.00 / cubic meter
1 cubic meter  (MOQ)
Product Description Snowflake heat transfer media: Due to its open structure and short channel path,it is regard as the ideal solution for for units prone to fouling from the process gas stream,

Metallic Saddle Ring Metal Intalox Saddle Ring Imtp for Separation

US$399.00-800.00 / m3
1 m3  (MOQ)
Product Description Metallic Saddle Ring Metal Intalox Saddle Ring IMTP for Separation Introduction Metal Saddle Ring is high performance random packing successfully used in mass transfer towers bo

FRP Demister China Factory Plastic C Shape and S Shape High Filtering Efficiency Efficient Demister

US$500.00-600.00 / Piece
1 Piece  (MOQ)
FRP Demister China Factory Plastic C Shape and S Shape High Filtering Efficiency Efficient Demister FRP Demister FRP Demister stands for Fiberglass Reinforced Plastic Demister, and it is a type of

Stainless Steel SS304 SS316L Wire Mesh Mist Eliminator for Gas Liquid Filter

US$200.00-400.00 / cubic meter
1 cubic meter  (MOQ)
Product Description Metal Wire Mesh Demister Products Introduction Metal Wire Mesh Demister is a gas-liquid separation device, and the gas passes through the wire pad of the demister to remove th

Distillation Packing Wire Gauze Structured Packing 450y

US$299.00-1,999.00 / Piece
1 Piece  (MOQ)
Distillation Packing Wire Gauze Structured Packing 450Y 1. What is the role of structured packing in high vacuum distillation column? It is a widely used liquid mixture separation operation in

PTFE Column Internals for Corrosion and High Temp Processes

US$100.00-100,000.00 / Set
1 Set  (MOQ)
Product Description Saiptech Super PTFE Column Internals One of our core competences is the development, construction, and manufacture of PTFE column internals for the chemical and pharmaceutical i
1 2 3 4 5 6 7 8 ... 36
About Mass Transfer Equipment Parts FAQ
  • QWhat are the common materials used in manufacturing mass transfer equipment parts?

    Mass transfer equipment parts are often fabricated from stainless steel, carbon steel, and PVC materials. The choice of material can impact factors like corrosion resistance, strength, and longevity. Consult with a reputable manufacturer to determine the most suitable material for your specific application.

  • QHow do I locate reliable suppliers for mass transfer equipment parts in China?

    To find reputable suppliers in China, utilize online sourcing platforms, seek referrals from industry contacts, or attend trade exhibitions. Evaluate supplier capabilities, review customer feedback, and request samples for quality verification. Working with a well-known manufacturer can streamline the process and ensure product consistency.

  • QWhat advantages come with procuring mass transfer equipment parts through wholesale channels?

    Purchasing mass transfer equipment parts wholesale offers cost savings, availability in volume, and enhanced production efficiency. Bulk buying opportunities often come with potential discounts, customized solutions, and assistance from seasoned suppliers. By engaging in wholesale transactions, clients can optimize their procurement process.

Haven't found what you want?

Easy Sourcing

Post sourcing requests and get quotations quickly.

Product Alert

Subscribe to product alert and stay updated to what's new and popular on the market.