Welding Auxiliary Equipment & Apparatus

Ka-He8 Multi-Functional Steel Structure Oscillate Welding Equipment Rail-Type MIG Welding

Product Description KA-HE8 KA-HE8 is a welding equipment that uses a rack and pinion drive to travel on track. It is widely used in horizontal butt welding and vertical butt welding, and is especially suitable for medium and thick plate welding. By adjusting the position and angle of the welding gun, fillet welding, horizontal welding and overhead welding can also be performed. The trolley body, swing device and control panel are integrated into one, and can be welded while walking on the track. The track is attracted to the workpiece with powerful magnets, making it easy to install and disassemble. 1. Ka-He8 can achieve various locations such as vertical welding, horizontal welding and horizontal welding. 2. There is a straight line swing function. Various swing parameters such as swing mode, swinging amplitude, swing speed, swing center position and left and right stay time can be adjusted. 3. Use a digital to display the speed of the car. 4. In order to prevent the emergence of the bite and insufficient welding when welding, the left and right swing stop time adjustment function is set. 5. When the welding stops, the welding torch will automatically return to the center of the welding channel. 6. Have a fast return function 7. Standard configuration provides a 1.5m long track. The rail miniaturization light movement is convenient, and it can also be connected to extend the use. 1. DC: car power unit running. Use of AC220V power. 2. rail: aluminum rigid rail, the standard configuration for the 1.5m, can be extended using the docking. 3.installation guide magnet: track fixtures. Produce 60Kg of suction can be strong adsorption of the workpiece. With a detachable handle for easy disassembly and moving track. 4.Control Panel: car control center, all movements are thus controlled. 5. Installation Handle: car track wheel clutch device. Twist the handle during installation, open wheel drive track, track wheels stuck in the track after the release of this handle, rail wheels automatically lock. When the handle in a semi-clutch state, can achieve rapid return feature. 6. XY slider: gun position adjusting mechanism. X direction of the adjustment range is ± 20mm, Y direction of the adjustment range is ± 20mm. 7.Swing Motor: Wiggler's drive. High precision DC motor, the power of 6W. 8. gun clip: welding gun clamping device. Can adjust the torch angle adjustment range of ± 90 °. (1) "Welding/non-welding" switch: When the "welding" position is selected, the machine enters the welding preparation state and presses the "start" switch to start welding. When the "non-welding" position is selected, press the "start" switch and the trolley will only move but will not weld. (2) Start" switch: When the switch is turned on, the trolley starts to move. If the "welding/non-welding" selection switch is in the "welding" position, welding starts; if the "welding/non-welding" selection switch is in the "non-welding" position, only the trolley moves but no welding is performed. (3) Stop" switch: If you press the stop switch during the trips of the car, all the actions will stop. (4) Up Down: You can choose to walk up or down. (5) speed: The speed value is displayed in digital, the maximum walking speed is 1040mm/min, and the digital display value is 99. (6) Swing speed adjustment knob: Turn clockwise to increase the swing speed,the maximum value is 1520mm/min. It is indicated by scale, the maximum scale is 10. (7) Swing range: Turn clockwise to increase the swing amplitude, the maximum value is 30mm. It is indicated by scale, the maximum scale is 10. (8) Stop time adjustment knob: The adjustment range is 0 ~ 2S, and clockwise increases. (9) Right stop time adjustment knob: The range is 0 ~ 2s, and clockwise increases. (10) left right center moving: When rot

Robotic Welding Arm Control Customizable Large Load Servo Positioner Fitness Equipment Automated Welding

Hydraulic Cylinder Pressure Vessels Boom and Column Girth Seam MIG Mag Welding

High Precision 300kg Welding Positioner

High Precision D28 Square U-Shape Plasma Nitrided, Modular Design, Quick Adjustment, Wear-Resistant and Heat-Resistant

Industrial Welding Rotator for Large Cylinder and Pipe Handling, Work Station Assembly, Pressure Vessel, Tank, Pipe, Turning Roll Rotator,