Copper · Semi-Automatic · Alloy
Precision Hydraulic Busbar Fabrication Equipment for Efficient Punching
US$ 9000-12000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Copper bar gas-hydraulic bending machine
The copper or aluminum bar hydraulic bending machine is used to bend the copper or aluminum bar once to deform the bar as requred angle.
Specification:
1. Suitable for bus bar of straight length type or L or Z type, length 500~3000mm, width less than 250mm
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Aluminum · Alloy · Automatic
Busbar Feeder Assembly Line, Feeder Busbar Fabrication Equipment
US$ 12000-15000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Busbar elbow assembly line
The busbar elbow assembly line is used to achieve the busar elbow riveting procedures.
Application:
1. Suitable for 90°flatwise, edgewise elbow compact busbar L or Z type;
2. Busbar length suited to be riveted:0.5m to 1.2m
Configuration:
1. One set of power c
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Aluminum · Alloy · Automatic
Compact Busbar Fabrication Equipment with Automatic Riveting System
US$ 200000-300000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Automatic busbar assembly line, sandwitch busduct production machine
The automatic busbar assembly line is specially designed for busbar assembly and riveting procedures.
Main working procedures:
1. pre-assembly: bending the copper or aluminum bus bar and then installing into the profile;
2. on
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Aluminum · Alloy · Automatic
Automatic Compact Bus Duct Assembly Machine, Sandwich Busbar Fabrication Equipment
US$ 200000-300000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Bus bar automatic assembly line, bus duct production machine
Advantages:
1.The automatic busbar production line can realize automatic drilling,riveting,automatic feed-in, clamping and positioning.
2.The production line is flexibly compatible,suitable for busbar with width 74.5mm-275mm and max.len
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Alloy · Aluminum
Four Piece Compact Busbar Assembly Line, Automatic Bus Duct Fabrication Equipment
US$ 200000-300000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Automatic busbar assembly line
The automatic busbar assembly line is specially designed for busbar assembly and riveting procedures.
Main working procedures:
1. pre-assembly: bending the copper or aluminum bus bar and then installing into the profile;
2. online assembly: automatic clamping, rive
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Aluminum · Alloy · Automatic
Advanced Automatic Busbar Reversal Equipment for Efficient Fabrication
US$ 20000-30000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Automatic Busbar Reversal Busbar Fabrication Equipment with latest technology
Advantages:
1. The semi-automatic busbar production line can realize automatic clamping from left to right and down to up which is convenient for drilling and riveting.
2. The production line is flexibly compatible,suit
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Aluminum · Alloy · Automatic
New Automatic Busbar Assembly Machine, Busduct Fabrication Equipment
US$ 200000-300000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Busbar automatic assembly line, busduct production machine
Advantages:
1.The automatic busbar production line can realize automatic drilling,riveting,automatic feed-in, clamping and positioning.
2.The production line is flexibly compatible,suitable for busbar with width 74.5mm-275mm and max.lengt
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Carbon Steel · Automatic · Aluminum
Precision Multi-Function Copper Busbar Fabrication Equipment for Cabinets
US$ 3500-5200
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Precision Multi-Function Copper Busbar Fabrication Equipment for Cabinets
This equipment has punching, cuttingg and bending processing units, which can punch, shear and bend the busbar at the same time. The mold can also be replaced to realize embossing, flattening, pressing cable joints, twis
Semi-Automatic · Alloy · Stainless Steel
Sandwich Busduct Fabrication Equipment for Assembling Busbar Assembly Machine
US$ 15000-20000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Busbar Manual Assembly Line is divided into platform type and elevator type. Also the frame can be selected between aluminum alloy material and iron material.
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Efficient Busbar Fabrication Equipment with Advanced Riveting Technology
US$ 15000-20000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Manual assembly line for compact busbar trunking system / Busbar fabrication machine for assembly of busway system
The manual assembly line includes two types, platform type and elevator type.
Platform type: automatic clamping from the side, manual riveting
Elevator type: automatic clamping from
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
-
How do I choose the right Busbar Fabrication Equipment for my processing needs?
Selecting a Busbar Fabrication Equipment depends on your required busbar bending capabilities and production volume. Wholesalers suggest reviewing price lists from OEM and factory outlets to spot current trends. Need guidance and cheap OEM options? Contact us to get a full buying guide with the latest trends and wholesale rates.
-
Are customized or OEM Busbar Fabrication Equipment solutions available for bulk orders?
Yes, most distributors offer custom Busbar Fabrication Equipment configurations and OEM features tailored to automation trends. It’s best to connect with a factory specializing in cheap or wholesale bulk pricing. Request quotes directly for your OEM needs and stay updated on custom machine innovations in this guide.
-
What factors impact Busbar Fabrication Equipment prices when buying factory direct?
Busbar Fabrication Equipment price varies based on technical specs, wholesale quantity, and custom requests. Factory direct suppliers provide detailed distributor pricing and up-to-date trends. For a transparent cost-saving purchase, compare prices across OEM and custom options—contact us now for a list of top-price deals.
Reliable Solid Busbar Fabrication Equipment for Optimal Production Lines
US$ 20000-30000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Solid and Stable Automatic Busbar Reversal Busbar Fabrication Machine
Advantages:
The semi-automatic busbar production line enables automatic clamping from left to right and up to down, facilitating drilling and riveting.
Flexible compatibility, suitable for busbars with a width of 74.5mm-350mm.
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Aluminum · Alloy · Automatic
Semi-Automatic Busbar Fabrication Machine, Automatic Bus Duct Assembly Equipment
US$ 35000-55000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Busbar semi-automatic reversal assembly line, busduct production equipment
Advantages:
1. The semi-automatic busbar production line can realize automatic clamping from left to right and down to up which is convenient for drilling and riveting.
2. The production line is flexibly compatible,suitabl
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Aluminum · Alloy · Automatic
New Automatic Busduct Fabrication Equipment, Busbar Assembly Line
US$ 1-1.1
/ Set
1 Set (MOQ)
1 Set (MOQ)
Automatic busbar assembly line
The automatic busbar assembly line is specially designed for busbar assembly and riveting procedures.
Main working procedures:
1. pre-assembly: bending the copper or aluminum bus bar and then installing into the profile;
2. online assembly: automatic clamping, rive
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Aluminum · Alloy · Automatic
Automatic Busbar Fabrication Equipment, Sandwich Busduct Assembly Line with Self Riveting System
US$ 200000-300000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Busbar automatic assembly line, busduct production machine
Advantages:
1.The automatic busbar production line can realize automatic drilling,riveting,automatic feed-in, clamping and positioning.
2.The production line is flexibly compatible,suitable for busbar with width 74.5mm-275mm and max.lengt
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Aluminum · Alloy · Automatic
Automatic Sandwich Busbar Trunking System Fabrication Assembly and Production Line Equipment
US$ 35000-55000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Busbar semi-automatic reversal assembly line, busduct production equipment
Advantages:
1. The semi-automatic busbar production line can realize automatic clamping from left to right and down to up which is convenient for drilling and riveting.
2. The production line is flexibly compatible,suitabl
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Semi-Automatic
Polyester Film Heat Forming Machine, Compact Busbar Fabrication Equipment
US$ 20000-30000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Digital polyester film forming machine is used for forming the compact busbar polyester film automatically which has the function that automatic form-finding process, width set, automatic cutting and automatic alarm when lack of material. Automatic operation can help to save labor cost.
Polyester f
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Aluminum · Alloy · Automatic
Innovative Busbar Fabrication Equipment for Modern Assembly Lines
US$ 35000-55000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Busbar semi-automatic reversal assembly line / Busbar Production equipment for busway system
Specification:
1. Suitable for straight compact busbar 630A~2500A, single layer, length 1.5~6m
2. Automatic end alignment, clamping and moving controlled by PLC
3. Manual riveting: two pieces or four pie
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Copper · Aluminum · Semi-Automatic
Busbar Hydraulic Machine for Sale-Copper Busbar Fabrication Equipment
US$ 7500
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description 3 IN 1 Busbar processing machine BBM303 This machine (also known as a busbar machine, busbar processing machine, or copper busbar processing machine) is mainly used for processing various specifications of copper and aluminum busbars. It can perform punching, shearing, and bendin
- SINO FIN CNC GROUP CO., LTD.
-
- Shandong, China
- Contact Now
Automatic · Copper
Equipment for Busbar Bender Processing Copper Busbar Bending Machine
US$ 18000-20000
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Specification ltems Units Parameters Power of servo motor kW 7 Bending accuracy degree Automatic compensation<±0.2 Max.stroke of bending mm 250 Stroke of lateral block material mm 2000 Max.moving speed oflateral block material m/min 35 Bending head m/min 6-10 Min.width of U-bending mm 40 Max.bending
Carbon Steel · Automatic · Aluminum
CNC Automatic Hydraulic Busbar Riveting and Clinching Machine for Compact Busway Busduct System Production Line Fabrication Machinery
US$ 50000-80000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Economical and practical Compact automatic busbar riveting machine with easy operation
The automatic busbar assembly line is used to automatically clamp, rivet the aluminum enclosure.
This assembly line is for two-piece type busduct system.
If four-piece type busduct, this automatic busbar assemb
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Automatic · Alloy · Stainless Steel
CNC Hydraulic Automatic Busbar Processing Machine Cutting Punching for Busbar Joint Pack Monoblock Fabrication Machinery
US$ 35000-60000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Automatic Busbar Processing Machine Cutting Punching for Busbar Joint Monobloc
The automatic joint connection bar processing center is a machine with unmanned operation. Operator only needs to set the related data on the touch screen such as current ratings, quantity, hole distance, raw material le
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Alloy · Carbon Steel · Copper
CNC Automatic Hydraulic Busbar Riveting Machine for Sandwich Busduct Production Line Factory Price Fabrication Machinery
US$ 35000-55000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Busbar semi-automatic reversal assembly line, busduct production equipment, busway production line, busbar manufacturing line
Semi-automatic assembly line is composed of three parts, pre-assembly station, automatic reversal station and accessory assembly station.
Pre-assembly station: Operators
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Copper · Aluminum · Semi-Automatic
Smart, Efficient Busbar Processing Machine for Metal Fabrication – Cutting, Punching, and Bending in Electrical Sectors
US$ 11000-12000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Best Quality Hydraulic Copper/Aluminum Busbar Machine Busbar Processing Machine
Product Description
This series JPSK-503ESK CNC Copper Busbar Processing Machine. It is easy to adjust each unit to shorten the processing time and improve the production efficiency.
The bending unit uses the
- SHANDONG JINGPENG CNC MACHINERY CO., ...
-
- Shandong, China
- ISO9001:2015
- Contact Now
Copper · Semi-Automatic · Alloy
Hydraulic CNC Busbar Bending Punching Fabrication Machine Multi Functional Copper Bar Processing Price Machine
US$ 13000-15000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Copper bar gas-hydraulic bending machine
The copper or aluminum bar hydraulic bending machine is used to bend the copper or aluminum bar once to deform the bar as requred angle.
Specification:
1. Suitable for bus bar of straight length type or L or Z type, length 500~3000mm, width less than 250mm
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Copper · Aluminum · Semi-Automatic
3 in 1 CNC Copper Busbar Fabrication Machine Busbar Bending Machine
US$ 14500-15500
/ Set
1 Set (MOQ)
1 Set (MOQ)
3 in 1 CNC Copper Busbar Fabrication Machine Busbar Bending Machine
Product Description
This series 3 in 1 CNC Copper Busbar Fabrication Machine Busbar Bending Machine. It have three functions: cutting punching and bending. Three functions can be wotking at the same time. so that it can sho
- SHANDONG JINGPENG CNC MACHINERY CO., ...
-
- Shandong, China
- ISO9001:2015
- Contact Now
Copper · Aluminum · Semi-Automatic
Jpsk-803esk CNC Copper Busbar Bending Machine Fabrication Machine
US$ 11500-13500
/ Set
1 Set (MOQ)
1 Set (MOQ)
JPSK-803ESK CNC Copper Busbar Bending Machine Fabrication Machine
Product Description
This JPSK-803ESK CNC Copper Busbar Bending Machine Fabrication Machine has three units:punching, shearing and bending.It is easily to adjust each unit to shorten the processing time and improve the production
- SHANDONG JINGPENG CNC MACHINERY CO., ...
-
- Shandong, China
- ISO9001:2015
- Contact Now
Auto Busbar Testing Line for Busduct Fabrication Machine
US$ 55000-65000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Automatic busbar inspection line
The automatic busbar inspection line adopts high voltage for busbar voltage and insulation resistance testing.
Specification:
1. suitable for straight compact busbar 630A~2500A, single layer, length 1.5~6m
2. working efficiency: 3min/piece
3. length of inspectio
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Copper · Automatic · Carbon Steel
Automatic CNC Copper Busbar Bending Fabrication Machine
US$ 14500-16000
/ SET
1 SET (MOQ)
1 SET (MOQ)
Automatic CNC Copper Busbar Bending Fabrication Machine
Product Description
This type JPSK-4A-503NC Semi-automatic copper cutting bending machine is mainly used for different types of processing copper or aluminum busbar. It is easy to operate and high production efficiently. So it is an ide
- SHANDONG JINGPENG CNC MACHINERY CO., ...
-
- Shandong, China
- ISO9001:2015
- Contact Now
Copper · Aluminum · Automatic
Multifunction CNC Busbar Bending Machine for Copper Bar Fabrication
US$ 15000-18000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Product Description Simon Intelligent Full CNC Busbar Bending Machine · Direct Spindle Connection: High transmission efficiency, high rigidity, high precision, stable output performance. Ensures accurate displacement even under heavy loads. · All-Electric Servo Bending: Driven by all-electric servo
- Simon Intelligent Equipment (Tianjin) Co., Ltd.
-
- Tianjin, China
- Contact Now
Automatic · Alloy · Stainless Steel
Multifunctional Busbar and Joint Bar Punching Fabrication Processing Machine
US$ 33000-36000
/ Set
1 Set (MOQ)
1 Set (MOQ)
CNC busbar punching-cutting machine
CNC busbar punching-cutting machine is a high efficiency .high precision machine controlled by computer,the machine can complete various processing techniques of punching holes (round holes, long round holes, etc.), embossing, cutting, slotting, cutting round c
- Suzhou Kiande Electric Co., Ltd.
-
- Jiangsu, China
- Contact Now
Haven't found what you want?
Product Alert
Subscribe to product alert and stay updated to what's new and popular on the market.