Electrostatic Spray · 380V
Good Quality Titanium Coating Machine, Plasma Spray for Artificial Bone Joint
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Commodity · 1.0 mm · 1500 ml
Bushing Coating Machine Plasma Spray Machine
US$ 49214
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Full automatic Thermal spraying equipment has obvious advantages over semi-automatic control equipment in the following aspects:
1) The control system adopts a mass flow controller, and the control accuracy of various gases is very high. The semi-automatic control system adopts manual control, and
Electrostatic Spray · 380V
Plasma Spray Machine for Non-Stick and Wear Resistance Coating, Thermal Spray for Ovenware
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Graphite Plate Coating Mullite Powder Plasma Spray Equipment From Factory Coating Processing
US$ 180
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Commodity · 1.0 mm · 1500 ml
Capacitor Coating Equipment Plasma Spray Equipment
US$ 49214
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Full automatic Thermal spraying equipment has obvious advantages over semi-automatic control equipment in the following aspects:
1) The control system adopts a mass flow controller, and the control accuracy of various gases is very high. The semi-automatic control system adopts manual control, and
Powder Coating Spray Turntable, Thermal Spray Rotator, Plasma Hvof Spray Rotary Table
US$ 6950
/ Set
1 Set (MOQ)
1 Set (MOQ)
Voltage
AC380V,3P
Rotator diameter
500mm
Control method
remote control
Clamping diameter
0-200mm
speed of mianshaft
10-300r/min
The load
200kg
SHANGHAI BIANPU TECHNOLOGY CO.,LTD
We are specialized in production of all kinds of spraying equipment and the technology applica
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Supply Artificial Bone Prosthesis Thermal Plasma Spray Equipment Ti-Ha Powder Coating Hvof Spray Machine Wc Powder Tungsten Carbide Coating
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Electrostatic Spray · 380V
Thermal Spray The Titanium Coating, Plasma Spray for Artificial Hip Prosthesis in Medical Industry
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Electrostatic Spray · 380V
Hydrogen Production Electrode Mesh with Nickel Aluminum Coating, Plasma Spray Equipment with Anti-Corrosion, Surface Treatment Production Line
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Good Quality Mf4MB-XL Spray Gun Nozzle with Electrode Tip Plasma Spray Equipment Powder Coating Machine
US$ 75-175
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
-
What types of coatings can be applied using Plasma Spray System?
Plasma Spray System is versatile and can apply coatings like metallic, ceramic, polymer, and cermet coatings. Each coating type offers unique properties such as corrosion resistance, abrasion resistance, and thermal insulation for components and machinery.
-
How to select a reliable supplier for Plasma Spray System in China?
Finding a trusted supplier in China for Plasma Spray System involves researching online platforms, trade exhibitions, and referrals. Consider suppliers with certifications and a strong track record of delivering high-quality products. Partnering with a well-known manufacturer ensures reliability and support throughout the procurement process.
-
What are the advantages of manufacturing Plasma Spray System in China?
Manufacturing Plasma Spray System in China offers cost-effectiveness due to lower production costs and access to skilled labor. Local manufacturing also allows for customizations, quick turnarounds, and efficient supply chain management, ensuring timely deliveries to international partners.
Electrostatic Spray · 380V
Plasma Spray for Ovenware with Wear Resistance and Non-Stick Coating
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Electrostatic Spray · 380V
Spray Ovenware with Wear Resistance Coating, Plasma Spray Equipment with Non-Stick Coating
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Electrostatic Spray · 380V
Plasma Spray for Artificial Bone Joint, Hip Prosthesis, Titanium Coating Machine
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Plasma Spray Anti-Corrosion and Wear-Resistance Coating Ceramic Powder Thermal Plasma Spray Equipment Hvof Spray Equipment for Tungsten Carbide Wc Powder
US$ 62500-65000
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Sandblaster, Surface Treatment Box-Type Sandblasting Abrasion Blasting Equipment, Plasma Spray Equipment, Hvof Spray Equipment Powder Coating
US$ 2800
/ Set
1 Set (MOQ)
1 Set (MOQ)
This sandblasting equipment adopts pneumatic remote control.
During the sandblasting operation, the compressed air and sand materials mixed to spraying on the workpieces.
Abrasive cylinder is welded by boiler steel plate, all welds must be tested the magnetic powder and tested the pressure.
Dimen
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Electrostatic Spray · 380V
Thermal Spray Titanium and Ha Powder, Plasma Spray for Artificial Bone Joint
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
CE · ISO
Pre-Treatment Sand Blasting Machine, Sandblasting Machine Before Plasma/ Hvof Spray Coating
US$ 2800
/ Set
1 Set (MOQ)
1 Set (MOQ)
This sandblasting equipment adopts pneumatic remote control.
During the sandblasting operation, the compressed air and sand materials mixed to spraying on the workpieces.
Abrasive cylinder is welded by boiler steel plate, all welds must be tested the magnetic powder and tested the pressure.
Dimen
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Plasma Spray Ceramic Powder Coating on Carbon Fiber Roll Thermal Plasma Spray Machine Hvof Flame Spray Equipment
US$ 64000
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Electrostatic Spray · 380V
Titanium and Ha Powder Coating Machine, Plasma Spray System for Artificial Hip Prosthesis
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Factory Supply Ceramic Carbon Plate Coating Processing Service Thermal Plasma Spray Equipment Hvof Spray Powder Coating
US$ 180
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Electrostatic Spray · 380V
Thermal Spray Nickel-Aluminum Powder for Hydrogen Production, Plasma Spray Equipment, Surface Treatment Machine
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Electrostatic Spray · 380V
Plasma Spray Equipment for Nickel-Aluminum Powder Coating in Hydrogen Production
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Copper Material Plasma Spray Equipment Powder Coating Machine Thermal Spray Coating Production Line
US$ 34000-500000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Product Parameters
item
value
Type
Coating Production Line
Substrate
Steel
Condition
New
Machine Type
Powder Coating Line
Video outgoing-inspection
Not Available
Machinery Test Report
Provided
Marketing Type
New Product 2023
Warranty of core components
1 Year
Coating
Powder
- Dezhou Winter Coating Equipment Co., Ltd
-
- Shandong, China
- ISO 9000
- Contact Now
Commodity · 1.0 mm · 1500 ml
Wear Resistant Seal Ring Coating Equipment Plasma Spray Equipment
US$ 49214
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Full automatic Thermal spraying equipment has obvious advantages over semi-automatic control equipment in the following aspects:
1) The control system adopts a mass flow controller, and the control accuracy of various gases is very high. The semi-automatic control system adopts manual control, and
Acrylic · Hot Flocking · 440V
C-1000 Powder Feeder/Plasma Spray Powder Feeder
US$ 39630
/ Set
1 Set (MOQ)
1 Set (MOQ)
C-1000 plasma flame spraying system powder feeder
Brief introduction:
The system is equipped with 2 powder feeders, one is used for the base powder, one is used for the surface powder, the two do not interfere with each other, C-1000 powder feeder is a high-precision powder feeding mec
Commodity · 1.0 mm · 1500 ml
Target Coating Equipment Plasma Spray Equipment
US$ 49214
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Full automatic Thermal spraying equipment has obvious advantages over semi-automatic control equipment in the following aspects:
1) The control system adopts a mass flow controller, and the control accuracy of various gases is very high. The semi-automatic control system adopts manual control, and
Thermal Spray Powder Coating on Graphite Plate Plasma Spray Equipment Thermal Spray Machine Hvof Spray Equipment Automatic Plasma Spray Production Line
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Factory Supply Thermal Spray Soundproof Room Powder Plasma Spray Equipment Hvof Spray Coating Booth
US$ 32000
/ Set
1 Set (MOQ)
1 Set (MOQ)
In the thermal spraying industry, it will produce dust, noise and temperature in the process of Plasma spraying, HVOF spraying and Arc spraying.
The noise of Plasma spraying is up to 115-120db, HVOF spraying is even up to 130-140db. In order to reach the standard of national environment noise 75db
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Thermal Plasma Spray Zirconia Coating Ceramic Powder Plasma Spray Equipment Hvof Spray Machine Tungsten Carbide Wc-Co Hard Alloy Coating
US$ 62500
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
CE · ISO
Insulated Bearing Plasma Spray Equipment Ceramic Powder Coating Machine Metallic Coating Machine Hvof Arc Spray Machine From Factory
US$ 68000-77465
/ Set
1 Set (MOQ)
1 Set (MOQ)
This series of Plasma Spraying equipment is designed for thermal spraying Metal, Alloy and Ceramic coating to surface treatment process. Application in spraying or coating the Metal, Oxide, Alloy, Carbide, Nitride, Boride and complex powders on the small parts, large workpiece, Mechanical, project c
- Shanghai Bianpu Technology Co., Ltd
-
- Shanghai, China
- ISO 9001
- Contact Now
Haven't found what you want?
Product Alert
Subscribe to product alert and stay updated to what's new and popular on the market.