Solids Control System

8,014 results for Solids Control System

20-325 · Multilayer · Linear

Oil Well Drilling Mud Fluids Solids Control System Shale Shake Kwd2000

US$ 15000-25000 / Set
1 Set  (MOQ)
Product Description High performance KINGWELL Shale shakers are designed to efficiently remove solids for drilling fluids. Shale shaker is used to remove solids from the drilling fluid in the first stage of solids control system in oil gas drilling, and also is used in mud recycling system for

Electric · Cast Steel · RoHS

Mud Tank Solids Control System

US$ 100000 / Piece
1 Piece  (MOQ)
Mud Tank Minimize the environment effect on tank performance. Put tanks in order according to practical demand based on our layout instruction. Please pay more attention on different tanks function and order as well as the seal and connection between tanks. Petroleum exploration and development

Stainless Steel · Hexagonal · CE

Drilling Fluids Tools Solids Control System Vertical Cutting Dryer

US$ 100-25000 / Piece
1 Piece  (MOQ)
Features and Benefits 1. Programmable Logic Controller (PLC), with automatic warning indicators, monitors the temperature, torque, oil flow and operating hours. 2. High-capacity, continuous feed units have the throughput to keep up with drilling. 3. Tungsten-carbide-coated, independently adjustab

Hexagonal · 20-100 · Steel

API Standard Oil Drilling Shale Shaker Parts Used Drilling Rig Solid Control System

US$ 30-60 / Piece
1 Piece  (MOQ)
When it comes to a solid control system on any type of drilling equipment, the shale shaker is arguably the most important pieces of equipment. With drilling fluid being so important to maintaining drill performance, being able to utilize fluid efficiently is crucial. Mesh Range Dimensions (lengt

CE · Circular · Single Layer

Solid Control System Jnq Series 80-6.4 Mud Gun

US$ 3800-4000 / Piece
1 Piece  (MOQ)
JNQ Series Mud Gun Model JNQ-80-1 JNQ-80-6.4 JNQ-50-1 JNQ-50-6.4 Discharge capacity 60 m3/h 60 m3/h 50 m3/h 50 m3/h Nominal diameter 80 mm 80 mm 50 mm 50 mm Working pressure ≤1 MPa ≤6.4 MPa ≤1 MPa ≤6.4 MPa Adjustable range 0~330° 0~330° 0~330° 0~3

ISO 9001:2008 · Electric · Cast Steel

Mud Non Landing System/Drilling Wastewater Treatment System

US$ 1999-99999 / Piece
1 Piece  (MOQ)
Product Description Mud non-landing is a common name for equipment suspension treatment, also known as equipment liquid non-landing, which refers to the use of mud non-landing equipment to screen out the suspension in the equipment liquid. Equipment that prevents mud from falling to the ground g

Electric · CE · Cast Steel

Oilfield Electronic Igniter and Electronic Ignition System for Oil Well Operations

US$ 4000-6000 / Piece
1 Piece  (MOQ)
Horizontal Drilling Mud Flare Ignition Device Flare Igniter Device for solids control system The KWVFI series electronic flare ignition device designed and manufactured by Kingwell can ignite and incinerate vented flammable and harmful gases to eliminate their harm to the environment and safety. Dr

Electric · CE · Mixed Funnel

Advanced Mobile Mud Hopper System for Efficient Fluid Mixing

US$ 3000 / Piece
1 Piece  (MOQ)
Technical Features 1. Jet Mud mixer has wide working pressure range: 0.25~0.4MPa 2. Available in both explosion-proof and non-explosion-proof standard; 3. Explosion protection is standard, can choose EXdIIBt4/IEC/ATEX. 4. The centrifugal pump is interchangeable with the NOV Mission pump, which

ISO 9001:2008 · Electric · Cast Steel

High Quality Drilling Mud Wastement Treatment System

US$ 999-199999 / Piece
1 Piece  (MOQ)
Product Description Mud non-landing is a common name for equipment suspension treatment, also known as equipment liquid non-landing, which refers to the use of mud non-landing equipment to screen out the suspension in the equipment liquid. Equipment that prevents mud from falling to the ground g

ISO 9001:2008 · Electric · Cast Steel

Frendly Environment Mud Recycling System for Oil & Gas

1 Piece  (MOQ)
Product Description Mud non-landing also known as liquid non-landing, which refers to the use of mud non-landing equipment to screen out the suspension in the equipment liquid. Equipment that prevents mud from falling to the ground generally includes drying screens, cuttings dryers, filter pres
  • QWhat are the key components of a Solids Control System typically consist of in manufacturing machinery?

    A Solids Control System in manufacturing machinery usually includes items like mud agitators, mud pumps, mud tanks, and associated pipes. Each component plays a critical role in proper fluid circulation for drilling operations.

  • QHow can I source reliable suppliers for Solids Control Systems manufacturing in China?

    Sourcing reputable suppliers for Solids Control Systems in China involves conducting thorough research, attending industry events, and leveraging online B2B platforms. Look for manufacturers with a proven track record and positive client testimonials.

  • QWhat are the advantages of partnering with a China supplier for Solids Control System wholesale purchases?

    Partnering with a dedicated China supplier for wholesale acquisitions of Solids Control Systems enables you to access competitive pricing, bulk availability, and consistent product quality. These collaborations often lead to streamlined setups and customized solutions to meet your project requirements.

ISO 9001:2000 · ISO 9001:2008 · Atmospheric Pressure

Mud System Desanding Plant for Bored Pile/Pipe Jacking Construction

US$ 5000-10000 / Piece
1 Piece  (MOQ)
Product Description Desanding plant is design for bored pile & TBM on construction with economy option and compact design for small footprint. BOBAN desanding plant can be used for economy option as HDD mud recycling system. Our desanding plant is design for flexible working and installation to sui

CE · Electric · Atmospheric Pressure

Advanced and Efficient Mud Stirring System

US$ 1100-3200 / Piece
1 Piece  (MOQ)
Product Description WNJ series mud agitator adopted turbo and worm gearing-down, it has the merits of larger torque transmission, operation steady, work reliable. It has two kinds of installation methods, horizontal and vertical. Common model is WNJ-5.5,WNJ-7.5,WNJ-11,WNJ-15 and WNJ-22, also we can

Atmospheric Pressure · Electric · Mud Tank

Complete Oil Drilling Mud System – High-Performance Equipment Improved Drilling Efficiency

US$ 12999-69000 / Piece
1 Piece  (MOQ)
Product Description Oil Drilling Mud System is a multi-tank mud system including shaker tank, centrifuge tank, mixing tank, reserve tank or mud storage tank and trip tank. By connecting with rig and mud pump, it forms closed loop mud circulation system. The mud system also called solids control sys

ISO 9001:2008 · Electric · Cast Steel

Jet Pulse Mixing System for Oil Drilling

US$ 6500-7000 / Piece
1 Piece  (MOQ)
Product Description Jet mixing device is used to prepare or increase the total amount of drilling fluid, change the drilling fluid density, viscosity, water loss, etc., all need to put the drilling fluid materials (bentonite, barite powder, etc.) and the corresponding chemical additives (polymers,

Electric · Atmospheric Pressure

Offshore High Quality Slurry Tank Systems with Corrosion Resistance for Cost Savings and Environmental Protection

US$ 15000 / Piece
1 Piece  (MOQ)
Product Description Oil Drilling Mud System is a multi-tank mud system including shaker tank, centrifuge tank, mixing tank, reserve tank or mud storage tank and trip tank. By connecting with rig and mud pump, it forms closed loop mud circulation system. The mud system also called solids control sys

ISO 9001:2000 · ISO 9001:2008 · Vacuum

Waste Gas Lighter in Drilling System Electric Flare Ignition

US$ 450-5000 / Piece
1 Piece  (MOQ)
Factory Supply Oil Drilling Mud Solid Control Equipment Electronic Flare Ignition Device Product Description Spec Model ZCYPD-15/2.5 ZCYPD-20/3 Diameter of Torch DN150 DN200 Height of Torch:m 2

CE · Hydraulic · Cast Aluminum

Multi-Media Filter to Remove Iron and Manganese Mechanical Filter Quartz Sand Filtration System

US$ 3000-6000 / Piece
1 Piece  (MOQ)
Product Parameters Model KWZCQ240 KWZCQ270 KWZCQ300 KWZCQ360 Capacity, m3/h 240 270 300 360 Vacuum Degree, MPa 0,020~0,040 Ratio 1,68 1,68 1,68 1,72 Handling Effiiency ≥95% ≥95% ≥95% ≥95% Main Motor Power, kW 15 22 30 37 Pump Motor Power,

Electric · CE · Mixed Funnel

High-Efficiency Drilling Mud Mixing Hopper and Filter System

US$ 700 / Piece
1 Piece  (MOQ)
Technical Features 1. Jet Mud mixer has wide working pressure range: 0.25~0.4MPa 2. Available in both explosion-proof and non-explosion-proof standard; 3. Explosion protection is standard, can choose EXdIIBt4/IEC/ATEX. 4. The centrifugal pump is interchangeable with the NOV Mission pump, which

Electric · CE · Cast Steel

Best Quality Fireworks Ignition System/ Automatic Ignition System/ Gas Flare Made in China

US$ 4000-6000 / Piece
1 Piece  (MOQ)
Horizontal Drilling Mud Flare Ignition Device Flare Igniter Device for solids control system The KWVFI series electronic flare ignition device designed and manufactured by Kingwell can ignite and incinerate vented flammable and harmful gases to eliminate their harm to the environment and safety. Dr

CE · Hydraulic · Cast Aluminum

Manual Auto Pressure Backwash Sand Filter for Side Stream Filtration System

US$ 3000-6000 / Piece
1 Piece  (MOQ)
Product Parameters Model KWZCQ240 KWZCQ270 KWZCQ300 KWZCQ360 Capacity, m3/h 240 270 300 360 Vacuum Degree, MPa 0,020~0,040 Ratio 1,68 1,68 1,68 1,72 Handling Effiiency ≥95% ≥95% ≥95% ≥95% Main Motor Power, kW 15 22 30 37 Pump Motor Power,

Electric · CE · Cast Steel

Factory Supply Oilfield Flare Igniter Electric Gas Flare Ignition System

US$ 4000-6000 / Piece
1 Piece  (MOQ)
Horizontal Drilling Mud Flare Ignition Device Flare Igniter Device for solids control system The KWVFI series electronic flare ignition device designed and manufactured by Kingwell can ignite and incinerate vented flammable and harmful gases to eliminate their harm to the environment and safety. Dr

CE · Hydraulic · Cast Aluminum

Vacuum Pressure Impregnation System for Motor Vacuum Degassing Chamber

US$ 3000-6000 / Piece
1 Piece  (MOQ)
Product Parameters Model KWZCQ240 KWZCQ270 KWZCQ300 KWZCQ360 Capacity, m3/h 240 270 300 360 Vacuum Degree, MPa 0,020~0,040 Ratio 1,68 1,68 1,68 1,72 Handling Effiiency ≥95% ≥95% ≥95% ≥95% Main Motor Power, kW 15 22 30 37 Pump Motor Power,

Electric · CE · Cast Steel

Oilfield Flare Ignitor Electric Gas Flare Ignition System

US$ 4000-6000 / Piece
1 Piece  (MOQ)
Horizontal Drilling Mud Flare Ignition Device Flare Igniter Device for solids control system The KWVFI series electronic flare ignition device designed and manufactured by Kingwell can ignite and incinerate vented flammable and harmful gases to eliminate their harm to the environment and safety. Dr

CE · Hydraulic · Cast Aluminum

Kingwell Hebei Drilling Mud Fluid Vacuum Degasser System

US$ 3000-6000 / Piece
1 Piece  (MOQ)
Product Parameters Model KWZCQ240 KWZCQ270 KWZCQ300 KWZCQ360 Capacity, m3/h 240 270 300 360 Vacuum Degree, MPa 0,020~0,040 Ratio 1,68 1,68 1,68 1,72 Handling Effiiency ≥95% ≥95% ≥95% ≥95% Main Motor Power, kW 15 22 30 37 Pump Motor Power,

ISO 9001:2008 · Electric · Stainless Steel

Hondin Energy Technology Solids Removal Centrifuge System

US$ 35000-40000 / Piece
1 Piece  (MOQ)
Product Description Drilling fluid centrifuge (oil centrifuge) drilling fluid centrifuge, drilling mud solid control system in the five-stage solid-phase particle control equipment, is the use of centrifugal sedimentation separation principle of drilling fluid suspension separation, is the drilling

ISO 9001:2008 · Electric · Cast Steel

OEM Service Drilling HDD Mud Recycling System

US$ 1999-99999 / Piece
1 Piece  (MOQ)
Mud Non-landing System Drilling solids control is a mud mixing and slurrying system that is matched with the drilling rig, while mud prevention is the back-end equipment of the drilling solids control system, which is mainly used to handle the waste drill cuttings after being processed by the drilli

CE · Hydraulic · Cast Aluminum

High Efficiency 250m3/Hr Water Treatment Sand Filter/Sand Filter System to Reduce Solid Particles

US$ 3000-6000 / Piece
1 Piece  (MOQ)
Product Parameters Model KWZCQ240 KWZCQ270 KWZCQ300 KWZCQ360 Capacity, m3/h 240 270 300 360 Vacuum Degree, MPa 0,020~0,040 Ratio 1,68 1,68 1,68 1,72 Handling Effiiency ≥95% ≥95% ≥95% ≥95% Main Motor Power, kW 15 22 30 37 Pump Motor Power,

CE · ISO 9001:2000 · Electric

Hondin Solid Mud Spray System

US$ 400-600 / Piece
1 Piece  (MOQ)
Product Description NJQ series mud gun is the professional tool to prevent the mud precipitation in drilling mud circulation system. The impetus of mud gun can come from either mud pump or jet mud mixer. With simple structure, fexible operation, easy using, it is the ideal equipment to prevent the

Atmospheric Pressure · Stainless Steel

Industrial Grade Mud Mixing System Enhanced Viscosity Control, and Consistent Drilling Performance

US$ 1500-3500 / Piece
1 Piece  (MOQ)
Product Description Jet mud mixer is designed to mixing the barite or bentonite into the drilling fluids and adjust the mud density / mud viscosity to fulfill the drilling target. Single Jet Mud mixer is composed of one set centrifugal pump, one set mixing hopper (verturi hopper) and one set electr

ISO 9001:2008 · Electric · Stainless Steel

Hondin Solids Removal Centrifuge System

US$ 35000-40000 / Piece
1 Piece  (MOQ)
Product Description Drilling fluid centrifuge (oil centrifuge) drilling fluid centrifuge, drilling mud solid control system in the five-stage solid-phase particle control equipment, is the use of centrifugal sedimentation separation principle of drilling fluid suspension separation, is the drilling
Haven't found what you want?

Easy Sourcing

Post sourcing requests and get quotations quickly.

Product Alert

Subscribe to product alert and stay updated to what's new and popular on the market.