Pneumatic · Crude Oil · Stainless Steel
Single RAM Anular Bop Top Seal and Front Packer Seal Rubber Front Packer
US$ 50-500
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
The product acan matach and interchange with the equipments of most of the domestic BOP manufactories;After the application in the oil fields over the years, it has been proved that all the techincial requirements and performance of our products can reach the standards of and be interchangeable w
- Jiangsu Deenpu Petrochemical Machinery Co., Ltd
-
- Jiangsu, China
- Contact Now
Oxidation · Cast Steel
Reliable Choke Manifold with Temperature Levels K to U
US$ 20000
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
Description:
The Choke Manifold is ingeniously designed for the latest drilling-well techniques utilizing balanced pressure. This advanced equipment not only protects the oil-layer from contamination but also significantly accelerates drilling speeds and ensures effective blow
- Yantai Kytider Energy Equipment Technology Co., ...
-
- Shandong, China
- Contact Now
Without Processing · Alloy
Oil Well Open Hole Casing Packer
US$ 1000
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Information:
1. Application
It is a important well completion tool. It's mainly used in complex oil, gas or water well completion engineering to realize downhole packing or plugging, improve well cementation and well completion.
It is used for staged packing of open holes for further oper
- Dongying Zhaoxin Industry and Trade Co, Ltd.
-
- Shandong, China
- Contact Now
Atmospheric Pressure · Stainless Steel · Water
Fishing Oil Skid Swabbing Unit Production Truck Oil Extraction Unit Wellhead Device Suction Oil Zyt Petroleum
US$ 130000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Swabbing unit
Swabbing unit is mainly used in the oil recovery operation for remote,abandoned and stripped well, and in the operation of oil well and water well swabbing, drifting and fishing,The
Pneumatic · Mud Tank · Atmospheric Pressure
Oilfield Drilling Rig Equipment Inside Bop/Ibop for Top Drive
US$ 1000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Product Description
API 16A hydraulic annular BOP can be used in work over and drilling operations equipped with hydraulic control systems. The BOPs are designed and manufactured in full conformity to the API 16A standard. The annular BOP mainly consists of a body, a header, a rubber core, and a
- Shandong Rosenwell Petroleum Technology Co., ...
-
- Shandong, China
- Contact Now
Forging · Alloy · Sand Blast
Flange Shock Resistant Pressure Gauge for Mud Pump
US$ 50-100
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
The pressure gauge we offered is We specialized in mud pump or standpipe mud pump.
It is available in all possible connection requirements and pressure ranges, with high pressure endurance (up to 30%) makes it suitable for various applications such as mud pumps, standpipe mud pumps, petroleum, well
- Jiangsu Deenpu Petrochemical Machinery Co., Ltd
-
- Jiangsu, China
- Contact Now
Atmospheric Pressure · Stainless Steel · Water
Fishing Oil Petroleum Unit Swabbing Skid Unit Oil Extraction Unit Wellhead Device Suction Oil Zyt Petroleum Equipment
US$ 93000
/ Set
1 Set (MOQ)
1 Set (MOQ)
Swabbing unit
Swabbing unit is mainly used in the oil recovery operation for remote,abandoned and stripped well, and in the operation of oil well and water well swabbing, drifting and fishing,The dru
CNC Milling · Alloy · Polishing
Drilling Rig Accessories Wealhead Flowline Corrosion Resistant Alloy Materials Check Valve Pr1 Pr2
US$ 100-500
/ Piece
2 Pieces (MOQ)
2 Pieces (MOQ)
Business Introduction
Shandong Rosenwell petroleum technology Co.,Ltd (hereinafter as Rosenwell company) is located in Dongying City, Shengli Oilfield which is the second largest oilfield and the largest petroleum industry base in China. Rosenwell company is a professional company engaged in petrol
- Shandong Rosenwell Petroleum Technology Co., ...
-
- Shandong, China
- Contact Now
Casting · Alloy · Spray-Paint
High-Performance Xq Power Tong with Detailed Machinery Testing Report
US$ 1399-13499
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
API 7k XQ Tubing Hydraulic Power Tong
The Type XQ Tubing Power Tong, a marvel of engineering, utilizes an advanced inner cam rolling-up clamping mechanism coupled with a robust hydraulic backup tong. Designed as the quintessential tool for the seamless loading and unloading o
Casting · Rubber · Polishing
Premium Rubber Seals for Wellhead Equipment in Oil Industry
US$ 0.09
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Model
Premium Rubber Seals for Wellhead Equipment in Oil Industry
Material
Rubber
Shape
Alien
Size
Customized
Other Size
Customized
Standard feature
Stable structure, sturdy and practical, not easily deformed
Optional Function
Durable
Buffer
Shock absorption
Oil-resistant
Dust
- Ningbo kunxiang international trade co., ltd
- Zhejiang, China
- Contact Now
-
What key components are required in the manufacturing process of Wellhead Control Systems?
Several key components, such as valves, chokes, tubing heads, and casing heads, are crucial for the manufacturing process of Wellhead Control Systems. Each part plays a significant role in the functionality and safety of the system, making it essential to source from reputable suppliers familiar with Wellhead Control System requirements.
-
How can I ensure superior quality when sourcing Manufacturing & Processing Machinery for Wellhead Control System equipment?
To guarantee exceptional quality when sourcing Machinery for your Wellhead Control System applications, opt for suppliers with a proven track record in the industry. Conduct thorough background checks on potential manufacturing partners and request documentation showcasing their expertise in designing equipment specifically calibrated for Wellhead Control Systems.
-
Why is it advantageous to partner with Mainland China for Wellhead Control System manufacturing and wholesale?
Partnering with Mainland China for Wellhead Control System manufacturing and wholesale offers a myriad of benefits, including cost-effectiveness, access to advanced technology, and a vast pool of skilled labor. Moreover, China's extensive manufacturing network ensures on-time delivery of high-quality Wellhead Control System equipment tailored to your specifications.
Atmospheric Pressure · Alloy · Spray-Paint
Double Gate Preventer for Oil Fields
US$ 20300-25000
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
Double gate preventer
The blowout preventer is designed to effectively control blowouts during the drilling process. The single and double ram blowout preventer is combined with the hydraulic control device. The single and double ram blowout preventer can be used alone, in comb
- Zhengzhou Angde Machinery Equipment Co., Ltd.
-
- Henan, China
- Contact Now
ISO 9001:2000 · Electric · Sand Pump
High-Capacity Sand Pump for Drilling Mud Fluid Control
US$ 599-9999
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
SB series sand pump is the ideal supporting equipment to provide power for desander, desilter, jet mixing device, and also can be used as a mud pump auxiliary grouting pump and wellhead replenishment pump. Its parameter design takes into full consideration that the matched
- Xi'an Hondin Energy Technology Co., Ltd.
-
- Shaanxi, China
- ISO9001:2015, ISO45001:2018, ISO14001
- Contact Now
Oxidation · Cast Steel
High-Performance Choke Manifold with Bore Sizes 2 1/16" to 7 1/16"
US$ 20000
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
Description:
The Choke Manifold, an essential component for modern drilling operations, is designed to masterfully execute the advanced technique of balanced pressure in new drilling wells. By implementing the Choke Manifold, you can significantly reduce the risk of oil-layer
- Yantai Kytider Energy Equipment Technology Co., ...
-
- Shandong, China
- Contact Now
Forging · Alloy · Sand Blast
Demco API-6A 3" Dm Mud Valve
US$ 300-500
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Description:
DEENPU Valves
Jiangsu Deenpu Petrochemical Machinery Co., Ltd offers a range of high-quality valves to meet various pressure requirements.
DM 5,000-psi Gate Valve
The DM 5,000-psi gate valve is available in two basic pressure classes:
ANSI Series Valves
Conforms to ANSI Classes 40
- Jiangsu Deenpu Petrochemical Machinery Co., Ltd
-
- Jiangsu, China
- Contact Now
Rubber
Shearing RAM Bop Rubber Packer Blowout Preventer Accessories with API
US$ 10-100
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
API Bop Front Rubber Seal Top Rubber Seal RAM Seals
Product Description
The product can match and interchange with most of the domestic BOP manufactories, (such as Shanghai Shenkai, Huabei Rongsheng, Chuanyou Jingkong, Baoji Oil, Jiangsu Xinde, Jiangsu Sanyi, etc). Over the years of usage in the o
Hydraulic · Cast Steel · Atmospheric Pressure
API 16A 13 5/8" 10000psi Shaffer Annular Bop for Well Drilling
US$ 5000-20000
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
API 16A 13 5/8" 10000psi shaffer annular bop for well drilling
In case of blowout and well-sealing is needed, high pressure oil coming from control system enters the bottom closing chamber from bottom inlet to push piston moving upward. The movement of piston forces rubber core to move upward al
- Jiangsu Deenpu Petrochemical Machinery Co., Ltd
-
- Jiangsu, China
- Contact Now
Forging · Cast Steel · Spray-Paint
4 1/2" Upper Kelly Valve Lower Kelly Valve for Oil Drilling Rig
US$ 900-950
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
Kelly valve also named Kelly cock or drill pipe safety valve. It is manual control valve in drill string circulating system and it is one of the effective tools to prevent blowout, Kelly valve is divided into upper kelly valve and lower kelly valve upper kelly valve is used betw
Casting · Alloy · Spray-Paint
Ddz Center Latch Elevator API 8c Good Quality
US$ 2000-2500
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
BETTER can supply series of elevators equal to VARCO/BJ style as, bottleneck type (18°taper shoulder) center latch type & side door type, square shoulder type (90°taper shoulder), slip type, which are suitable for handing drill pipe, drill collar, casing and tubing and o
- BETTER DRILLING FLUID SOLUTION ...
- Shandong, China
- Contact Now
Pneumatic · Crude Oil · Stainless Steel
Flow Products Manufactures 4" 1502 Ball Deflector Cross for High Pressure Frac
US$ 300-500
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
FEATURES: .
Removable, Top Entry Screen .
Simple design .
Screen can be replaced inline
SPECIFICATIONS: .
15,000 PSIG Working Pressure .
Flow Inlet: 4" 1502 Female .
Ball Outlet: 4" 1502 Female .
Flow Outlet: 4" 1502 Male .
Capture Ball Size: 2-3/8" MA
- Jiangsu Deenpu Petrochemical Machinery Co., Ltd
-
- Jiangsu, China
- Contact Now
Spray-Paint · Cast Steel · Forging
Wellhead Tools Drill Pipe Elevators for Drilling and Workover Rig
US$ 1000-3000
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
BOBAN provides Drill Pipe Elevators with square shoulder type and 18° bottleneck type. It's suitable for handling tubing,casing,drill pipes and drill collars in oil drilling,natural gas drilling and well construction. All of our elevators are designed and manufactured accord
Without Processing · Atmospheric Pressure · Casting
API Down Hole Fishing Tools Lead Impression Blocks
US$ 115-130
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
The Impression Block used in fishing operations is an assembly of a steel body and a soft lead founded at the bottom. It is designed to enable the operator to determine the configuration of the top of the fish and to locate its position in the well bore.
It's use to enable the
Casting · Alloy · Spray-Paint
API 7K Power Tong Model Xq with Comprehensive Machinery Test Report
US$ 1399-13499
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
API 7k XQ Tubing Hydraulic Power Tong
The Type XQ Tubing Power Tong is expertly designed with an innovative inner can rolling-up clamping mechanism and comes equipped with a state-of-the-art hydraulic backup tong. This makes it the ultimate solution for efficiently handling t
Forging
Hot Sell Precision Machining Long Lasting Performance Plug Manifold
1 sets (MOQ)
Be sure that all scraps have been cleaned and all seal rings are good before connecting
the high and low pipeline.The union shall be assembled properly without any leakage.
The length between manifold and fluid container shall be as short as possible,and between fracturing blender truck and manifo
- Jiangsu Wellhead Drilling Equipment Co., Ltd.
-
- Jiangsu, China
- ISO9001:2015, ISO45001:2018, ISO14001, Others
- Contact Now
Forging · Cast Steel · Spray-Paint
Factory Price API Standard Hydraulic Power Casing Tongs
US$ 1500-3000
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Products Description
Factory price API standard hydraulic power casing tongs
The series power tong is used for quick make-up/break-out in well service operations.
The tongshave the following features:
Clamp the tubing use corresponding dies, jaw set or die seat.
Torque control valve may b
Atmospheric Pressure · Alloy · Spray-Paint
Double RAM Preventer for Oil Well Equipment
US$ 20300-25000
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
Double gate preventer
The blowout preventer is designed to effectively control blowouts during the drilling process. The single and double ram blowout preventer is combined with the hydraulic control device. The single and double ram blowout preventer can be used alone, in comb
- Zhengzhou Angde Machinery Equipment Co., Ltd.
-
- Henan, China
- Contact Now
Forging · Alloy · Spray-Paint
API Zsj/Zxj Hydraulic & Mechanical Two-Piece Drilling Jar for Oilfield Drilling
US$ 2000-2200
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
This type of drilling jar is connected to the drill string to help release stuck drill tools during drilling operations and ensures that drilling operations can be resumed promptly. This product is especially recommended for directional, complicated and deep wells.
This dril
Forging
Good Quality Corrosion Resistant High Temperature Resistance Ring Type Blowout Preventer for Use
1 Set (MOQ)
BOP is used for formation testing,drilling workover operations and well completion operations etc to prevent well blowout, makes the two functions of fully closed and semi-closed together,and it has features of simple structure,easy operation and high pressure resistance etc,it's a safety sealing de
- Jiangsu Wellhead Drilling Equipment Co., Ltd.
-
- Jiangsu, China
- ISO9001:2015, ISO45001:2018, ISO14001, Others
- Contact Now
Pneumatic · Crude Oil · Stainless Steel
Petroleum Safety Valve - API 6A Certified Pressure Relief for Oil & Gas Systems
US$ 10-25
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Pressure Relief Valves - safety relief valves are often used in the oilfield when provide overpressure protection for cementing/fracturing pumps, fracturing &treating lines, pressure vessels, and other equipment.
Pressure Relief Valves - safety relief valves opens when a preset pressure is excee
- Jiangsu Deenpu Petrochemical Machinery Co., Ltd
-
- Jiangsu, China
- Contact Now
Pneumatic · Crude Oil · Stainless Steel
API 6A Retainer Plate for Style FC&Fls (2K-10K) Manual Gate Valve
US$ 30-600
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
As a professional Wellhead Assembly & Christmas Tree manufacturer, We produces a wide range of API 6A Manual & Hydraulic Manual Valve components of various sizes for different applications, such as Valve Body, Gate, Seat, Bonnets, Stem, Retainer Plate, Bearing Cap, Stem Adapters, Packing Gland, Hand
- Jiangsu Deenpu Petrochemical Machinery Co., Ltd
-
- Jiangsu, China
- Contact Now
Hydraulic · Alloy · Crude Oil
Cross Maniford API Forged High-Pressure Integral Fittings Elbow Tee Joint Cross-Premium Pipe Fittings
US$ 109-315
/ Piece
1 Piece (MOQ)
1 Piece (MOQ)
Product Description
Integral Fittings are used for connecting surface manifold. DEENPU Integral Fittings are forged from high strength alloy steel, handled by advanced heat treatment technology and conducted strict factory quality control. End connections are union or thread.
Many types are availa
- Jiangsu Deenpu Petrochemical Machinery Co., Ltd
-
- Jiangsu, China
- Contact Now
Haven't found what you want?
Product Alert
Subscribe to product alert and stay updated to what's new and popular on the market.