Molybdenum

5,762 results for Molybdenum

99.95% Cold Rolled Pure Molybdenum Sheet Tungsten Sheet for Vacuum Furnace

US$80 / Piece
5 Pieces  (MOQ)

Pure Molybdenum sheet and Molybdenum lanthanum sheet plate Molybdenum sheet/plate/foil/strip specification: 1) Purity≥99.95% 2) Density:10.2g/cm3 3) Size: Thickness 0.05-50.0mm Width 20-800mm Length 100-3000mm or as your need 4) Grade:Mo1/MoLa/TZM 5) Processing:cold rolled, Stress relief annealing, Hot rolled 6) Surface: polished, washed, ground, grinding. Molybdenum sheet/plate/foil/strip-Mo1/MoLa/TZM 99.95% Molybdenum Sheet, Molybdenum Strip 0.3mm 0.5mm Thickness 1. Purity: Mo>= 99.95% 2. Standard: GB/T 4182 or ASTM 3. Property specification 1) high melting point, high strength, 2) smooth and clean surface, 3) good conductions, small linear expansion coefficient and good heat-resistance Molybdenum foil, Molybdenum MoCu alloy sheet and molybdenum TZM Mola sheet/wafer/disk Molybdenum discs/wafer/washer/round circle specification: 1) Grade: Mocu 2) Density: 9.8-10.2g/cm3 3) Size: 0.05-100mm(thickness)*5-500mm(diameter) or as your need 4) Flatness tolerance:<4um 5) Roughness:Ra1.6-Ra0.8 6) Surface: polished, ground. Molybdenum copper alloy forged rods Molybdenum contents 50%-85% Mo-Cu composites has lower density, its thermal expansion coefficient and thermal conductivity can be adjusted to match many different materials. MoCu alloy physical Properties of Major Products Material Wt% Molybdenum Content Wt% Copper Content g/ Density at 20ºC W/M.K Thermal conductivity at 25ºC (/k) Coefficient of thermal expansion at 20ºC Mo85Cu15 851 Balance 10 160-180 6.8 Mo80Cu20 801 Balance 9.9 170-190 7.7 Mo70Cu30 701 Balance 9.8 180-200 9.1 Mo60Cu40 601 Balance 9.66 210-250 10.3 Mo50Cu50 500.2 Balance 9.54 230-270 11.5 Features of Molybdenum copper alloy: 1)Large sized sheets available ( we can supply as the customers' need) 2)More easily to be stamped into components than CMC 3)Very strong interface bonding which can repeatedly resist 850ºC heat shock 4)Higher thermal conductivity and lower cost Molybdenum copper alloy application: molybdenum copper used in spaceflight fields. Molybdenum copper alloy has more excellent performances, so can be used as high temperature part of rockets and missiles. This alloy has high thermal conductivity, thermal expansion, high melting point, and the good mechanical ability, all of these reasons, which make the molybdenum copper can be used in the spaceflight fields. Polished Molybdenum Copper Mo80cu20 W80cu20 Alloy Rod and Plate (with high melting point) Mola and pure molybdenum discs/wafer/washer/sheet Thinner Molybdenum Sheet Molybdenum Foil Mocu Sheet Tzm Molybdenum Sheet 1. Purity: Mo>= 99.95% 2. Standard: GB/T 4182 or ASTM 3. Property specification 1) high melting point, high strength, 2) smooth and clean surface, 3) good conductions, small linear expansion coefficient and good heat-resistance Thickness (mm) Width(mm) Length(mm) Surface Rolled condition Molybdenum Plate 8.0-16.0 10-1000 10-1000 Alkali washed Hot rolled 3.0-8.0 10-1000 10-1000 Hot rolled Molybdenum sheet 1.5-3.0 10-1000 10-2500 Acid cleaning Coled rolled 0.5-1.5 10-1000 10-2500 Cold rolled 0.2-0.5 10-1000 10-2500 Cold rolled Our main products: Molybdenum Products Molybdenum rods/ Molybdenum plate /Molybdenum sheet Molybdenum wire/ alloy Molybdenum wire/ Moly wire for EDM Molybdenum electrode/molybdenum disk/Molybdenum boat/ Molybdenum Crucible/Molybdenum tube Tungsten Products Tungsten rods/ Tungsten plate/ Tungsten sheet Tungsten wire/ Tungsten electrode Tungsten crucible /Tungsten boat/ Tungsten tube Other specail shape/part Alloy Products TZM Products/MoLa products, WC, Ti, Ta, Ni, etc. WNiFe / WniCu Product/ Alloy ball/WC-Co Tungsten fishing

Top Quality Molybdenum Piercing Plug Molybdenum Mandrels Molybdenum Head Moly Plug

US$55.00-60.00 / kg
1 kg  (MOQ)
Commodity Name New molybdenum mandrel head for piercing steel rod Material Mo1,Mo2 Available Materials Mo1,Mo2,TZM,MoLa. Specification 36.2x100mm 40.2x100mm Density 10.2g/cm3 Purity Mo>=9

Dia 0.08-3mm 99.95% Pure EDM Molybdenum Wire for EDM/Wire Cutting

US$40.00-50.00 / kg
1 kg  (MOQ)
Molybdenum wire is principally used in the high-temperature field of molybdenum furnace and radio tube outlets, also in thinning the molybdenum filament, and the molybdenum rod in heating materials fo

Polished Molybdenum Rods Mola High Temperature Molybdenum Tzm Alloy Rods, Polished Tungsten Alloy W80cu20 Bars/Rods & 99.95%W Pure Black Tungsten Rods

1 kg  (MOQ)
Polished Molybdenum bar rod molybdenum MoLa rod 1) Specification: Pure molybdenum rod Mo purity: Mo>=99.95% Density: >=10.1g/cm3 Dia: 1.0-120mm Surface: Polished, ground, cleaned, black. Stand

Low Carbon Ferro-Molybdenum Femo Powder Ferro Molybdenum Ferromolybdenumpowder for Steel Making

US$19.00-22.00 / kg
100 kg  (MOQ)
Product Description Ferro molybdenum powder Content: Mo: 60% - 70%; particle size: -60mesh -80mesh-200mesh - ultra fine. Ferromolybdenum alloy can increase the wear resistance of alloy pr

High Quality 99.95% High Purity Pure Moly Bar Molybdenum Rod

US$10.00 / Piece
1 Piece  (MOQ)
Molybdenum Rod Our products are high-purity powder, featuring less impurity content in bar blanks, high sintering density and large deformation of the forged finished products. We lay emphasis on the

Molybdenum Lanthanum Rods, High Temperature Molybdenum Bar with Lanthanum

US$31.00-50.00 / kg
1 kg  (MOQ)
Product Description Name Molybdenum lanthanum Rod (La2O3) Specifications Dia. (2-500) mm * L (10-3000) mm Max. temp 1800 ºC Working temp 0-1700 ºC Purity ≥99.95% Density ≥

High Quality Ferro Tungsten Alloy Ingot Price Buy Few 70-80 Ferro Tungsten Lump for Steel Making

US$2,500.00-3,000.00 / Ton
20 Tons  (MOQ)
The agglomeration method uses an open electric furnace that can move on tracks and the upper section of the furnace body is detachable, and carbon is used as the reducing agent. The mixed charge compo

Forged Polished 99.95% Top Grade Quality Molybdenum Tube/Tungsten Tubes/Molybdenum Alloy Tubes

US$68.00 / kg
1 kg  (MOQ)
Product Description 99.95% molybdenum tube / molybdenum pipe (Mo1/MoLa/TZM) Molybdenum copper MoCu Alloy Tubes Molybdenum tubes information: Purity:>=99.95% Grade: Mo1,MoLa(high temperature)&Mo

China Good Price for Steel Making 60%Min Ferro Molybdenum 65%Min 10-50mm Ferromolybdenum

US$24,000.00-28,000.00 / Ton
1 Ton  (MOQ)
Product Description Product Introduction: Ferro molybdenum is an amorphous metal additive in the production process.One of the main benefits of ferro-molybdenum alloys is their hardening propertie
1 2 3 4 5 6 7 8 ... 193
About Molybdenum FAQ
  • QWhat are the common uses of Molybdenum in Metallurgy, Mineral, and Energy industries?

    Molybdenum is often used in various applications, including in the production of steel, alloys, lubricants, and catalysts. Its strength, high melting point, and resistance to corrosion make it invaluable for diverse industrial purposes.

  • QHow can I verify the quality and authenticity of Molybdenum suppliers in China?

    Ensuring the quality and reliability of Molybdenum suppliers involves evaluating their certifications, inspecting samples, and confirming their experience in the industry. Partnering with a reputable and established supplier is key to obtaining high-quality materials.

  • QWhat are the benefits of purchasing Molybdenum from a trusted China wholesale supplier?

    Procuring Molybdenum from a trusted China wholesale supplier guarantees competitive pricing, a wide range of product options, and typically faster delivery times. Their expertise and resources ensure you receive top-notch materials for your metallurgy, mineral or energy projects.

Haven't found what you want?

Easy Sourcing

Post sourcing requests and get quotations quickly.

Product Alert

Subscribe to product alert and stay updated to what's new and popular on the market.