Basic Info.
Installation
Direct Connected
Usage
Multi-Functional Energy Meter
Power Meter Connection
Terminal
Product Description
product description:
SG13WD15 hand-held stable light source provides 2 wavelength stable outputs according to user needs, and provides dual wavelength outputs of 1310nm and 1550nm for single-mode fiber measurement. It is an ideal test instrument for fiber engineering.
Product Features:
High stability multi-wavelength single-mode laser output, CW mode or modulation mode
LCD display working wavelength status
Continuous working time up to 45 hours
One-key switch working wavelength, flexible and convenient operation
Automatic shutdown function can be set
Technical indicators:Instrument model | General configuration | PON light source dedicated |
SG13WD15 | 1310/1550nm | 1310/1550nm |
Specification:light emitting device | FP-LD |
Output power (dBm) | -7 |
modulation | CW/270/1K/2K |
Fiber Category | SM,MM |
Connector | FC/PC |
Working temperature (ºC) | -10+60 |
Storage temperature (ºC) | -25+70 |
Automatic shutdown time (min) | 10 |
Battery continuous working time (h) | 45 |
power supply | 3 AA batteries |
Dimensions (mm) | 190*100*48 |
Weight (g) | 400 |
Function Description:
1. Optical output end: It can be connected to the signal receiving end of the device under test with an FC-type optical fiber connector.
2. LCD display: LCD displays the output light wavelength value.
3. Power button: Press this button to turn on the power in the off state, and long press (greater than or equal to 3 seconds) to turn off the light source in the power-on state.
4. AUTO OFF key: In order to save power, the automatic shutdown function is enabled by default in the power-on state (automatic shutdown after 10 minutes). Press this button for the automatic shutdown function (less than or equal to 3 seconds).
5. WAVE key: This key is used for cyclic switching of various wavelength outputs.
6. MODE button: This button can adjust the different output power of the light source and switch between CW, 270Hz, 1000Hz, 2000Hz.
7. LIGHT key: This key is used to turn on or off the background light.
Instructions for use:
1. Connect the optical fiber connector to the optical output port.
2. Press the power button to turn on, the work indicator lights up.
3. Adjust the output wavelength of the light source by pressing the WAVE key.
4. Adjust the output power of the light source by pressing the MODE button.
5. Various working states of the stable light source are displayed on the LCD of the instrument.
6. Power off: Press the power button, the indicator light is off, the LCD does not display, and the power is off.
configuration table:
Stabilized light source host, product warranty card, Oxford soft bag, certificate, 3 AA batteries (optional).
Maintenance and Care Precautions:
1. If it is not used for a long time, please protect the light output port with a dust cap to prevent the output port from being polluted by exposure to the air.
2. After the stable light source is used for a period of time, the light output port may have dirt adhering to the inner sleeve, resulting in a drop in output power. At this time, use a cotton swab dipped in alcohol to remove the dirt, and then use a dry cotton swab to remove the traces.
3. If you do not use it for a long time, please take out the battery in time to avoid the automatic discharge of the battery from damaging the battery shrapnel and affecting the performance of the light source.
quality assurance:
natural months after the user receives the goods , our company will promise the quality and craftsmanship of its products. The warranty period is within 12 months from the date of receipt: when the purchased products are found to be defective during this period Quality problems, our company will make corresponding treatment or replacement, but in any case, our company's responsibility will not exceed the purchase value of the product.
2. If there is a problem with the instrument during use, it cannot be solved according to the common fault prompt scheme, and the user is not allowed to open the case without authorization, please contact our company.
3. For the failure caused by product defects, our company is responsible for free repair or replacement of the product.
Note: This guarantee is only applicable to the normal use of the instrument, and under normal use conditions, our company is responsible for free maintenance or replacement due to product quality or material defects. Our company has the right to refuse the warranty for unexpected situations, improper use, and unauthorized start-up maintenance.FAQ:
More details, please ask the professional salesman.
Address:
Building 6, Nanhu Jinghong Garden, Hongshan District, Wuhan, Hubei, China
Business Type:
Manufacturer/Factory
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters
Management System Certification:
ISO 9001
Company Introduction:
Wuhan Wolon Communication Technology Co, Ltd is located at Optical Valley, Wuhan, China with a registered capital of 22 million yuan. Wolon is established 2010, as a professional manufacturer. It holds 3 branch and 350 workers. Which is one of large supplier of fiber optic products in China. It specialized in R&D, production and sale of PLC splitter, patch cord, fiber optic connector, adapter, MPO, SFP module, fiber optic terminal box, fiber optic splice closure and FTTH products. Wolon gathers a group of optical talents on fiber communication, which possess the rich experience of R&D and a strong capability.