Offset Printing Porcelain High Temperature Water Slide Transfer Decals for Glasses Ceramic

Material Type: decal
Material: water decal
Application: glass,ceramic,furniture, glass,ceramic,furniture
Type: Water Transfer, Water Transfer,water slide
Place of Origin: Sichuan, China (Mainland)
Brand Name: HS
Model Number: HSH002
product name: Water Transfer Printing decals for ceramic
Feature: water transfer,easy use
color: pink,purple
Patterns: flower

Descriptions

Spot color screen printing or CMYK offset printing,
Colorful image,
Top qulity
Ceramic decals.

1. Glass decals: 540-630 Celsius degree,
2. On-glaze decals: 780-830 Celsius degree, 60-90 minutes
3. In-glaze decals: 1000-1300 Celsius degree, 120 minutes, heat preservation for 10 minutes.

A ceramic decal is used to apply designs to ceramic tableware, ornamental ware and tiles, and glass containers.

The decal comprises three layers: The color, or image layer, which comprises the decorative design; The covercoat, a clear protective layer, which may incorporate a low-melting glass; And the backing paper on which the design is printed by screen printing.

The decal method is often used for the decoration of pottery. A special paper is used but the ceramic colours cannot be printed directly and the actual printing is done in varnish and the color then dusted on. The decal is placed colored side-down on the sized ware, rubbed firmly, and the paper then sponged off.


The application way:
 
Stage 1: Wipe the ceramic tile that you want to stick clean (no duration time requirement, clean is ok).
 
Stage 2: Cut one pattern from the 50cm*70cm high temp decal paper (no duration time requirement, cutting well is ok).
 
Stage 3: Soak and wet the cutted pattern completely in water for 3-5 seconds (wet completely is ok), warm water(20ºC-30ºC) needs to be used in winter.
 
Stage 4: Place the pattern onto the correct position of the ceramic tile, wait for 1-2 minutes before moving the base paper, If not movable, wet completely again. If movable, move the base paper away carefully in one direction.

Stage 5: After moving the base paper, the pattern has been transfer printed on the ceramic tile, then squeeze out completely any excess water and air bubble with rubber or other tools (no duration time requirement, squeezing out completely is ok).
 
Stage 6: Dry the water around the pattern with dry towel (no duration time requirement, dry is ok).
 
Stage 7: Place the ceramic tile has been printed pattern into a oven, then curing(baking) time in small oven is 2 hours ( from heating to cooling), the curing temperature is 780ºC-800ºC.
 
 
Noted; The high temp decal need positive stick, that means the side of the pattern must face up or face to the operator(users).