High Performance One Component, Low Modulus Construction Sealant and Adhesive

Cartridge 310ml

Sausage 400ml

Sausage 600ml

Pail/Drum 240kg

310ml: 24pcs per box.  600ml: 20pcs per box.

Direction for use

Tool: Manual or pneumatic plunger caulking gun

Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating.

For cartridge

1.Cut nozzle to give the required angle and bead size

2.Pierce the membrane at the top of the cartridge and screw on the nozzle

3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength

For sausage

1.Clip the end of the sausage and place in barrel gun

2.Screw end cap and nozzle on to barrel gun

3.Using the trigger extrude the sealant with equal strength

Attention of operation

Choose this product, primer, activator and other matching product, must have bonding test before bonding the materials, to ensure that they have good compatibility. At the same time, before application, should guarantee that the sealant, primer and activator are in the warranty period.

Please strictly according to the application process, any violation of the application operation may cause bonding failure. This product is innocuous after curing completely, but before

curing, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. If the situation is serious, please go to see a doctor immediately

Transport &Storage

Transport: Keep the sealed product away from moisture, the sun, high temperature and avoid collisions.

Storage: Keep the sealed product into cool, dry place.

Storage temperature: 5~25ºC. Humidity: ≤50%RH.

Cartridge and Sausage :9 month. Pail/Drum:6 month.

Notice:If the temperature is higher than 40 ºC or the humidity is more than 80%RH, the shelf life may be shorter.

Safety Operation Data

MSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from MAXTECH or other distributors, or mail to service center maxtech

Warranty and Liability

All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advice we supply don't apply in any circumstances. MAXTECH don't make assurance of any other applications outside the specification until MAXTECH supply a special written guarantee. MAXTECH is only responsible to replace or refund if this product is defective within the warranty period stated above. MAXTECH makes it clear that will not be liable of any accidents.

Maxtech do the PU sealant, MS sealant, Silicone sealant & Epoxy adhesive for Automotive industry, Construction industry, Road, Electronic compoenent .

Any inquiry, welcome to talk more us.