Semiconductor Tec Cold and Hot Platform

This series of semiconductor water-cooled temperature control platforms is specifically designed for OLED devices, wafers, semiconductor devices, infrared detectors
Customized development of photomultiplier tubes or any other products that require temperature control ICs, characterized by high precision and stability.
Semiconductor refrigeration operates based on the Peltier effect principle, with high precision, long lifespan, small size, no noise, and no wear
It is a truly green product with advantages such as no vibration, no pollution, and the ability to both cool and heat. Complete machine configuration, stable performance
High cost-effectiveness and advanced position among similar products at home and abroad. Very suitable for those who require high precision and stability in temperature
Used by various manufacturers, companies, universities, research institutions, individuals, etc.
Note: In order to achieve the best accuracy, linearity, stability, etc., this product uses a standard Japanese imported NTC (thermistor)
As a temperature sampling component.



1.2 Product Features:
Intelligent stepless temperature regulation, bidirectional temperature control;
The temperature control accuracy is ± 0.1 ºC or ± 0.01 ºC;
Control temperature range -20 ºC~100 ºC or -40 ºC~120 ºC, other ranges can be customized;
The uniformity of the plane is below ± 0.1 ºC
The flatness of the plane is less than 10um. The heating and cooling rate can be set, with a cooling time of 45 seconds for -10 to 85 liters and 30 seconds for 0-60 liters;
Constant temperature mode: bidirectional hot and cold constant temperature
It has protection against overcurrent, overvoltage, overheating, etc
Equipped with hardware over temperature, under temperature and other protection circuits;
High stability, high anti-interference, completely eliminating 50/60Hz power frequency interference in the temperature sampling channel;
Cooling method: Water cooling
Platform size: W × L × H=60 × 90 × 20mm
Customization accepted: can be customized according to customer needs


1.3 Main purpose and scope of use
Semiconductor laser, laser chip, module temperature control;
Crystal, chip, solid temperature control;
PD temperature control
Experimental and scientific temperature control source
Liquid temperature control (specially customized)
Non standard customization



1.4 Operating Environment
Environmental temperature: -10 ºC~+50 ºC;
Relative humidity: 0%~95%, no condensation;
Environment: No shaking, no corrosive gases, no flammable gases, no oil mist, no water vapor, etc;
Atmospheric pressure: 70~106Kpa;
Storage temperature: -40 ºC~+70 ºC;