Basic Info.
Product Description
Herelink is an integrated remote controller, ground station and wireless digital transmission system designed to be used with the Cube Autopilot, Ardupilot or PX4. Herelink allows RC control, HD video and telemetry data to be transmitted upto 20km between the ground station and air unit, the Herelink remote controller features custom Solex TX and QGC applications and both air unit and ground station feature an integrated 8 core SOC for custom application development.
Herelink 1.1 is based on the original platform and functions of Herelink 1.0. The controller improved the display brightness up to 1000 nit. Moreover, an additional Ethernet interface is available on airunit1.1 to support more peripheral devices and adapt to more applications, a SD card slot is available on the airunit 1.1.
Note: Please use the latest version of flasher_win to upgrade your HereLink1.1 controller and HereLink1.1 airunit firmware. (
HereLink / HereLink 1.1 Technical specifications
1. Airunit and Controller
4 *Cortex A53, 2.2GHz / 4 * Cortex A53, 1.4GHz
Airunit LPDDR3 1GB | Controller LPDDR3 2GB
Airunit EMMC: 4GB|Controller EMMC:8G
FCC 20km | CE / SRRC / MIC 12km
720p@30fps | 1080p@30/60fps
(herlink1.0) 516g(Including 2 antennas) | Here Link 1.1: 536g
217×106.5×31mm (not include external antennas and joy-sticks)
5.46 inch,1080P,16 million colors, capacitive touch screen
Herelink1.0 :600nit | Herelink 1.1 :1000nit
Built-in speaker × 1, built-in microphone × 2
Hall affect gimbals with removable sticks x 2, scroll wheel × 1, bottom button × 6 with backlight, top button × 1 (right)
Bluetooth / WIFI / GPS / 2.4G map transmission ground
tricolour LED *2 (Up right and left corner)
MicroUSB × 1, Micro SD × 1 (supports maximum 64GB)
Directional antenna (5dBi) *1 detachable ,omnidirectional antenna(2dBi) *1 detachable
built-in wifi antenna, built-in GPS antenna, external GPS antenna interface x 1
Build-in 4950 mAh Lipo Battery
Support micro USB port 5v 2A current charging
The average power consumption does not exceed 4W (only picture transmission work, medium screen brightness, WiFi off, GPS off)
The average power consumption does not exceed 4W
Camera video signal input (Recommend)
Camera video signal input
Recommended supply voltage 7V: minimum 6V, maximum 12V and avoid sharing BEC with servos
Dual RCout ,S.bus1 and S.bus2
Used for debugging and upgrading, support OTG mode**(need external power for USB device)**
Used for pairing and state reset
Used to indicate state for pairing and video transmission
Used for signal transmission and ground communication
The average power consumption does not exceed 4W
Camera video signal input (Recommend)
Camera video signal input
Recommended supply voltage ~7V: minimum 6V, maximum 12V and avoid sharing BEC with servos
Dual RCout ,S.bus1 and S.bus2
Used for debugging and upgrading, support OTG mode**(no need external power for USB device)**
Used for pairing and state reset
Used to indicate state for pairing and video transmission
Used for signal transmission and ground communication
SD Slot(only supported by Airunit 1.1)
ETH Interface(only supported by Airunit 1.1)
Network protocol device access
4.Airunit Interface Specification
(Airunit1.0 & Airunit 1.1)
Power IN,7V - 12.6V max(3s Lipo supported)
RX of air module,3.3V TTL
TX of air module,3.3V TTL
ETH(only supported by Herelink 1.1):
3.Omnidirectional antenna *1
17.M1.6x3mm(Airunit case screw)*5
18.M3x10mm(Back board mounting screw)*3
19.M3 Nut(Back board mounting nut)*3
20.Fan*1(available in Herelink1.1)
Solid Green Light : Receiving HDMI 1 Signal
Solid Red Light : Receiving HDMI 2 Signal
Solid Yellow Light : Receiving flight control data signal
Geen and Red light flickered alternately : Receive 2 video stream signal
Geen Yellow, and Red light flickered alternately : Receive 2 video stream signal and flight control signal
No Light : Receiving no valid video signal or flight controller signal
Geen light flickered : Pairing
Solid green light : Receiving valid control signal and power is normal
Solid Yellow light : Unpaired/no valid signal received
Red light flickered : Unstable power
No Light : Airunit is not powered
Controller pairing and Enter upgrade mode
Control gimbal (configurable)
Take photo (configurable)
Power on/off and unlock screen
Return to Land options (configurable)
Address:
Room 206-1, No. 39-1, Xinchang Road, Xiamen, Fujian, China
Business Type:
Manufacturer/Factory
Business Range:
Computer Products, Consumer Electronics, Industrial Equipment & Components, Instruments & Meters, Service
Company Introduction:
Our company mainly engages in the agency and sales of drone related products, providing complete solutions for a wide range of drone manufacturers.
