Inovia Ispk1h/Ispk2h 1HP and 2HP Solar Water Pumping Kit 250 W Monocrystalline Solar Panel and Micro-Inverter

iSPK1H~2H  SOLAR WATER PUMPING KIT
INOVIA iSPK solar water pumping kit is a complete water pumping system that can be installed without the requirement of any extra knowledge or tools. This kits provide:
•             Up to 25% more energy
•             Increased energy yield and faster return on investment
o             No module power mismatch loss
o             No partial shading loss
o             No soiling mismatch loss
o             No aging mismatch loss
•             Cost-efficient maintenance
•             Safety during installation, maintenance, firefighting and other emergencies
 
iSPK includes the following products:
•             iP250M: 250W monocrystalline solar panel.
•             Water pump:
o             iSWP1H/2H: Submersible water pump.
o             iWP1H/2H: Surface water pump.
•             iMv250S: 250W high efficiency solar micro inverter.
•             iSM500G: Ground PV mounting system.
•             iSAS10: Ground Solar system assembly tools and user guide.
•             iPCB1: Solar pumping control box and wiring set.
•             iWM2: Water meter.
•             iSolarBus power cables series.
•             Torque arrestor.
•             Check valve.
iSPK SYSTEMS CONFIGURATIONS
  
 
iSWP1H/2H SUBMERSIBLE WATER PUMP
iSWP series are Stainless steel submersible pump motor that are directly connected to the submersible pump. It is suitable for the extraction of groundwater from deep well, can also be used in rivers, streams, canals and other water projects, the pump contains automatic protection device, that effectively protect the pump in harsh environments and sand. iSWP have an antifreeze structure.
 
This pump can work continuously under the following conditions:
Medium temperature not higher than + 40 ºC
Medium PH value of between 6.5-8.5
The volume of the medium containing solid impurities does not exceed 0.1%
Particle diameter of not greater than 0.2mm
Single-phase power supply voltage 220V frequency 50Hz, rated voltage fluctuation range of ±10%
diving depth of not more than 5m
 
 
Technical Details:
  
iWP1H/2H SURFACE WATER PUMP
iWP series centrifugal water pump have sealing portion and dry asynchronous motor combined into one. Used mainly for agriculture and the general situation of water supply and drainage power irrigation equipment, the pump has a small size, light weight, easy to move, simple install, energy efficient, durable and so on.
 
Usage
Agricultural irrigation
Gardening and water fountain
Underground water pumping
Water tower
Drainage construction
Domestic water
 
Working Conditions
Water containing solid impurities in the volume ratio of not more than 0.1%
Particle size not greater than 0.2 mm, such as general water, tide, well water and so on.
Transmission temperature not exceed + 40 ºC
Single-phase power supply voltage 220V frequency 50Hz, rated voltage fluctuation range of ±10%
 
Technical Details:
  
iWM2 WATER METER
iWM2 Series Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows for simplicity and accuracy with wide flow ranges, even in low flow applications. The magnetically driven, hermetically sealed register will not leak or fog and is completely separated from the water. These water meters are designed for long service life and maintenance-free operation, even under harsh conditions.
 
Features:
Coupling Size: 3/4" NPT (19mm)
Max Flow: 30 GPM (114 l/min)
Nominal Flow: 2 to 30 GPM (7 to 114 l/min)
Transitional Flow: 0.25 GPM (1 l/min)
Limits:
Temperature: 104°F (40°C)
Pressure: 232 psi (16 bar)

Accuracy:
Transitional Flow: ±5%
Nominal Flow: ±2%

Wetted Materials:
Body: Brass, polyethylene
Couplings: Brass
Measuring Chamber: Polyethylene, ABS plastic, ferrite, acetal

 
TORQUE ARRESTOR
Fits 1" or 1-1/4" Drop Pipe, Fits 4" to 8" well casing. Supplied with 2 stainless steel clamps.
Weight: 2 pound ( 0.95kg)
Dimensions: 12 x 4.5 x 3 inches (30.5 x 11.5 x 7.6 cm)
Material: Rubber
 
CHECK VALVE
No lead check valve cvnl100bs brass
iP250M 250W MONOCRYSTALLINE SOLAR PANEL
iP250M is a solar panel that provides high power output up to 250W with embedded anti-reflective and anti-soiling surface. It can provide outstanding performance in low-light irradiance environment.
Highly reliable due to stringent quality control
Over 30 hours in-house tests (UV, TC, HF, and many more)
In-house testing goes well beyond certification requirements

High power output of more than 250W and module efficiency up to 16.74%
Module can bear snow loads up to 5400Pa and wind loads up to 2400Pa
High performance under low light conditions cloudy days, mornings and evenings
Approved original MC4 Photovoltaic connector used with highest reliability
Embedded RFID tag for more flexible management and maintenance.
Manufactured according to International Quality and Environment Management System Standards ISO9001:2008, ISO14001:2004
Positive power tolerance 0~+5w
TÜV NORD certified panel. 
iMV250S 250W HIGH EFFICIENCY SOLAR MICRO INVERTER
iMv250S Micro inverter with integrated ground delivers increased energy harvest and reduces design and installation complexity with its all-AC approach. With the advanced iMv250S, the DC circuit is isolated and insulated from ground, so no Ground Electrode Conductor (GEC) is required for the micro inverter. This further simplifies installation, enhances safety, and saves on labor and material costs. Designed to out-perform the competition in harsh conditions, iMv250S is sealed against sand, dust, and water. iMv250S is designed to be compliant with industrial standards.
Full digital Control.
Minimizes impact of shading, dust and debris
No GEC needed for micro inverter
No DC design or string calculation required
Serial and Power Line Current communication enabled
Protection from: islanding, short-circuit, polarity reverse, low voltage, over-voltage, over temperature
Manufactured according to International Quality and Environment Management System Standards ISO9001, ISO14001
Approved original IP67 connectors used with highest reliability
Manufactured with high reliability components from well-know suppliers: Infineon, Mitsubishi, TI. 
iSM500G GROUND PV MOUNTING SYSTEM
Open fields are well suited as a location for solar installations. Along with providing many square meters of surface area, they also have the space required to place the installations in the most favorable position facing the sun. iSM500G field PV mounting system is flexible and can be easily adjusted to fit any space. This system is applicable to any type of surface. With the use of screw piles, concrete pads, driven piles and ballast, you'll always have the right foundation for your situation.
•               304 stainless steel
•               Clamp system in portrait configuration
•               Easy assembly
•               Any tilt angle possible
•               Available in short or long lengths, depending on the location
•               Available as kits
•               Holds one row of panels
•               Reduced wind load due to low height
•               Ideal for small surfaces or where there are height limitations
•               Maximum ease of installation due to a limited number of components
•               Very durable construction
•               Manufactured according to International Quality and Environment Management System Standards ISO9001, ISO14001
iSM500G field PV mounting system is applicable to any type of surface. Depending on the nature of the surface, the foundation can be secured by screw piles, concrete pads, driven piles or ballast in the form of concrete bars. The primary aim is to achieve maximal stability
iSAS10 SOLAR ASSEMBLY TOOLS AND USER GUIDE
iSAS10 assembly set is designed and manufactured to be used in solar system mounting. This assembly set is designed to be used in the assembly of the following systems:
iSM500F: Floor mounted solar system
iSM500G: Open field solar system
iSM500W: Wall mounted solar system
 
Box size (LxWxH): 510x320x100mm   Weight: 6kg/13.23lbs      
Content: 
IPCB1 SOLAR PUMPING CONTROL BOX AND WIRING SET
iPCB1 is a ready-made high quality solar water pumping system control box
IP65 enclosure suitable for indoor and outdoor applications
Ready wired electric box for easier setup and installation
Over-current protection
Short circuit protection
Current unbalancing protection
Earth fault detection
Energy metering
DIN rail based design
iEB1 contain:
iEM50: 50A max DIN rail electric energy meter
GFI circuit breaker
Switches
Power system manager
Water pump controller
Auto-shutdown Timer
iSOLARBUS POWER CABLES SERIES
IP68 power cable
AWG14 cable
Cable material type: PVC, PU, Rubber, Silicon
20A maximum current
Nominal voltage 220v
Contact resistance < 10mΩ
500mΩ dielectric resistance at DC500V
3KV standing voltage Under normal temperature
Shell material: Flame-resistant/anti-UV nylon (PA66) RL94V-0
Operating temperature: -45C ~ +105C
Humidity: 90% + 40 C