Basic Info.
Communication Mode
Full-Duplex & Half-Duplex
Transmission Rate
10/1000/10000/100000/100000Mbps
Specification
650mm× 550mm× 175mm
Product Description
CE8850-64CQ-EI
Software Companionship
Table 2-345 lists the matching relationships between the CE8850-64CQ-EI and the software versions.Table 2-345 Supporting relationships| Equipment series | Device sub-series | Device model | abbreviation | Supported versions |
|---|
| CE8800 | CE8850 | CE8850-64CQ-EI | CE8850EI | V200R005C00~V200R019C10Illustrate:Among them, V200R005C20 version is not supported. |
Appearance structure
Please refer to the actual shipped products for the appearance of the equipment and modules. The figures given in the manual are example figures and are for reference only.
Figure 2-169 CE8850-64CQ-EI appearance
| 1 | Grounding screws | 2 | 2 ETH management interfaces (RJ45) |
| 3 | ESN serial number and MAC address label | 4 | Console interface |
| 5 | USB interface | 6 | Mini USB port |
| 7 | Fan slot 1Supported Fan Modules:- FAN-180A series fan module
| 8 | Fan slot 2Supported Fan Modules:- FAN-180A series fan module
|
| 9 | Fan slot 3Supported Fan Modules:- FAN-180A series fan module
| 10 | Power slot 1Supported Power Modules:- 1200W AC & 240V DC Power Module (PAC-1K2WA)
- 1200W High Voltage DC Power Module (PHD-1K2WA)
- 1200W DC Power Module (PDC-1K2WA)
Illustrate:When the switch uses a 1200W AC &240V DC power module, if the input is 110V AC:- With dual live wire input, the rated output power of the power module is 1200W, and the power supply can be 1+1 backup.
- If dual live wire input is not used, the output power of the power module will be derated to 800W, and two power modules are required to be configured, and the two power modules will supply power to the device at the same time, and 1+1 backup cannot be realized.
|
| 11 | Power slot 2Supported Power Modules:- 1200W AC & 240V DC Power Module (PAC-1K2WA)
- 1200W High Voltage DC Power Module (PHD-1K2WA)
- 1200W DC Power Module (PDC-1K2WA)
Illustrate:When the switch uses a 1200W AC &240V DC power module, if the input is 110V AC:- With dual live wire input, the rated output power of the power module is 1200W, and the power supply can be 1+1 backup.
- If dual live wire input is not used, the output power of the power module will be derated to 800W, and two power modules are required to be configured, and the two power modules will supply power to the device at the same time, and 1+1 backup cannot be realized.
| 12 | 64 x 40GE/100GE QSFP28 Ethernet optical interfacesIllustrate:The QSFP28 Ethernet optical interface can be split into four x 10GE or four x 25GE. Supported Modules and Cables:- 40GE QSFP+ package optical transceiver
- 100GE QSFP28 Optical Transceiver (QSFP-100G-4WDM-40 Optical Transceiver is not supported)
- QSFP+ - QSFP+ AOC Optical Cable
- QSFP+ - 4*SFP+ AOC Optical Cable
- QSFP+ - 4*SFP+ High Speed Cable
- QSFP+ - QSFP+ high-speed cable
- QSFP28 - QSFP28 AOC Fiber Optic Cable
- QSFP28 - QSFP28 high-speed cable
- QSFP28 - 4*SFP28 High Speed Cable
|
| 13 | Two 10GE SFP+ Ethernet optical interfaces
Currently, this interface is not available and is reserved for future function expansion. | 14 | Mounting holes for hanging ears |
- Power slot
The CE8850-64CQ-EI switch contains two power slots to support the installation of pluggable power modules. Users can use single or dual power modules to power the switch, and using dual power modules to power the switch can provide higher reliability for the switch.The CE8850-64CQ-EI switches support 1+1 backup of dual power modules.- When both power modules are working properly, each power module provides half the power to the switch.
- When one of the power modules fails, the other power supply module provides full power to the switch.
All power modules are hot-swappable. - Fan slots
To ensure system stability and heat dissipation, each CE8850-64CQ-EI switch provides three fan module slots, and pluggable fan modules are installed to force heat dissipation. In normal use, the switch requires three fan modules to be in place at the same time and operate properly.
All fan modules are hot-swappable.
Depending on the power modules and fan modules that use different air ducts, the cooling air ducts of CloudEngine 8800, 6800, and 5800 series switches can be divided into front and rear air ducts or rear front air ducts. The type of air duct power module and fan module you choose depends on the installation orientation of CloudEngine 8800, 6800, and 5800 series switches in the cabinet. For example, if the power supply side is facing forward and the port side facing backward in the cabinet, the switch needs to use the fan module and power module of the front and rear air ducts.- Front and rear air ducts: The heat dissipation air ducts are on or marked on the power modules and fan modules of the front and rear air ducts. Figure 2-170 shows the airflow direction of the switch as follows the inlet air on the power supply side and the outlet air on the port side (CE5800 device is used as an example).
- Rear front air duct: The heat dissipation air duct is on or marked on the power module and fan module of the rear front air duct. The airflow of the switch is as follows the intake air on the port side and the outlet air on the power supply side, as shown in Figure 2-106 (CE5800 device is used as an example).
- If the switch uses an air-cooled power module and a fan module, the direction of the heat dissipation air duct used by the power module and the fan module must be the same.
Figure 2-170 The airflow direction of the front and rear air ducts (port side air outlets) for heat dissipation
Figure 2-171 Airflow direction of the rear front air duct (port side air intake) heat dissipation
Indicator light description
Figure 2-172 CE8850-64CQ-EI Panel Indicator (Back)
Figure 2-173 CE8850-64CQ-EI Panel Indicator (Front)
Table 2-346 CE8850-64CQ-EI panel indicator| numbering | Indicator light silk screen | The name of the indicator | Indicator color | Indicator status | Status reason |
|---|
| 1 | SYS | System operating status light | green | Always extinguished | The system is not running. |
| Flash mob | The system is in the process of booting. |
| Slow flashing | The system is running normally. |
| red | Solid on | - The device starts up abnormally.
- Power supply abnormality alarm.
- Fan abnormality alarm.
|
| 2 | MST | Stacks master-slave LEDsIllustrate:In V200R003C00 and later versions, you can run the dfs-master led enable command to enable the stack master-slave indicator to display the active/standby status of a DFS group.
After enabling the DFS Group Active/Standby Status Indicator on the Stack Master/Slave Indicator, the stack indicator is displayed in the DFS active/standby state, the stack master-slave indicator of the DFS status is always on, and the stack master-slave indicator of the DFS status is always off. | green | Always extinguished | This device is not the stack master. |
| Solid on | The device is the stack master or the device that is not stacked. |
| 3 | ID | ID indicator | blue | Always extinguished | The ID light is not enabled, the default state. |
| Solid on | It is used for on-site positioning, and the operation and maintenance personnel can remotely control the ID light to turn on and off. |
| 4 | - | 10GE/25GE Mode Serial Lights for 40GE/100GE Interfaces (40G/100G Breakout 1/2/3/4)Illustrate:The four serial lights are lit in 1/2/3/4 cycles, and each light is lit for 5s. | green | Always extinguished | The 40GE/100GE interface works in 40GE or 100GE mode and is not split into four 10GE or four 25GE interfaces. |
| Solid on | At least one interface runs in 10GE or 25GE mode and is split into four 10GE or four 25GE interfaces.
When any one or more 40GE/100GE interfaces are configured as four 10GE or four 25GE interfaces, the serial number takes effect and the interface indicator is used to distinguish the first 10GE/25GE interfaces. In this case, observe the interface indicator at the digit 5 in Figure 2-172:- If the serial number lamp 1 is on, the indicator of each interface indicates the status of the first 10GE/25GE interface on the interface.
- If the serial number light 2 is on, the indicator of each interface indicates the status of the second 10GE/25GE interface on the interface.
- If the serial number light 3 is on, the indicator of each interface indicates the status of the third 10GE/25GE interface in the interface.
- If the serial number light 4 is on, the indicator of each interface indicates the status of the fourth 10GE/25GE interface in the interface.
|
| 5 | - | Service Interface Indicator (40GE/100GE Optical Interface)Illustrate:The arrow direction of the indicator light corresponds to the interface, pointing down indicates the lower interface, and facing up indicates the upper interface. | green | Always extinguished | The interface is not connected or is closed. |
| Solid on | The interface has a connection. |
| flashing | The interface is sending and receiving data. |
| 6 | USB | USB boot indicator | green | Always extinguished | USB flash drive deployment is not enabled, and the default status is used. |
| Solid on | The USB flash drive is complete. |
| flashing | The data of the USB flash drive is being read. |
| red | Solid on | The USB flash drive failed to start. |
| 7 | ACT | Mini USB indicator | green | Always extinguished | Indicates that the Mini USB port is not activated and the current Console port is available. |
| Solid on | Indicates that the Mini USB port is activated and the current Console port is unavailable. |
| 8 | - | Manage network port indicators | green | Always extinguished | The link is not connected. |
| Solid on | The link is connected. |
| Yellow | flashing | The interface is sending and receiving data. |
API description
40GE/100GE QSFP28 encapsulated optical interfaceTable 2-347 lists the interface attributes of the 40GE/100GE QSFP28 packaged optical interfaces.Table 2-347 Optical interface attributes of a 40GE/100GE QSFP28 package| attribute | description |
|---|
| Connector type | The connector type of an optical fiber is determined by the optical module |
| Optical interface properties | It depends on the module or cable selected |
| Meets standards | IEEE802.3ba |
| Working mode | Full-duplex mode |
10GE SFP+ encapsulated optical interface
Two 10GE SFP+ encapsulated optical interfaces are not available and are reserved for subsequent function expansion.
Console interfaceThe console interface is used to connect to the console to implement the on-site configuration function, and the console commissioning cable needs to be used. Table 2-348 lists the interface properties of the console port.Table 2-348 Console interface properties| attribute | description |
|---|
| Connector type | RJ45 |
| Meets standards | RS232 |
| Working mode | Full duplexUART(Universal Asynchronous Receiver/Transmitter) |
| baud rate | 9600bit/s~115200bit/s
The default value is 9600 bit/s |
- The console interface and the mini USB interface are multiplexed, and they are the same interface internally. Users can choose between the Console port or the Mini USB port according to their needs, and when the Mini USB port is activated, the Console port is not available.
- If both ports are wired, the Mini USB port is preferred.
The Mini USB interface is used to connect to the console to realize the on-site configuration function of the system, and the configuration terminal at the peer end needs to install the USB serial driver. As long as the Mini USB interface is wired normally, the serial port will be switched to the Mini USB interface.
ETH Management Interface (RJ45)The ETH management interface (RJ45) is used to connect with the network port of the configuration terminal or network management workstation to build an on-site or remote configuration environment, and needs to be matched with Category 5 or higher network cables. Table 2-349 lists the interface attributes of the ETH management interface (RJ45).Table 2-349 ETH management interface (RJ45) attributes| attribute | description |
|---|
| Connector type | RJ45 |
| Meets standards | IEEE802.3ab |
| Working mode | 10/100/1000Mbit/s self-adaptation
Full-duplex mode |
| Longest effective distance | 100m |
The CE8850-64CQ-EI has two ETH management interfaces (RJ45), and the precautions for using the two interfaces are as follows:- Two interfaces cannot be used at the same time, just select one of them.
- Before the device starts, you can choose to use interface 1 or interface 2 in the BIOS menu, and interface 1 is used by default.
- After the device is successfully enrolled:
- If both management interfaces are connected and up, interface 1 will be used as the active, interface 2 will be automatically used as a backup without configuration, and the management port numbers displayed on the CLI interface of the device are MEth0/0/0.
- If the two management interfaces are connected after the device is registered, the first-in-first-use principle is implemented.
- If interface 1 fails, the system automatically switches to interface 2, and switches back to interface 1 only if interface 2 fails or the device restarts. You can check which interface is currently in use by looking at the indicator lights on the physical interface (the link indicator of the ETH interface in use will be solid green, the ACT light will flash yellow when there is data transmission, and the indicator lights of the standby interface will always be off).
Specifications
Table 2-350 lists the specifications of the CE8850-64CQ-EI switch.Table 2-350 Specifications and parameters| specification | description |
|---|
| Physical parameters | - Dimensions (W×D×H): 442.0mm× 600.0mm×88.1mm.
- Weight (including 2 power modules and 3 fan modules, if multiple modules are supported, the maximum weight is taken): 22.2kg.
|
| Environmental parameters | temperature | - Operating temperature: 0°C~40°C(0m~1800m).
Illustrate:At an altitude of 1800m~5000m, the maximum temperature specification decreases by 1°C for every 220m above sea level. - Storage temperature: -40°C~+70°C.
|
| relative humidity | 5%RH~95%RH, non-condensing. |
| altitude | <5000m |
| Noise (sound pressure, room temperature 27°C) | - Rear front air duct: <64dBA.
- Front and rear air ducts: <64dBA.
|
| Power supply parameters | Power input type | AC/DC/HVDC |
| AC input characteristics | - Rated voltage range: 100V AC~130V AC/200V AC~240V AC; 50/60Hz.
- Maximum voltage range: 90V AC~290V AC; 47Hz~63Hz.
|
| DC input characteristics | - Rated voltage range: -48V DC~-60V DC.
- Maximum voltage range: -38.4V DC~-72V DC.
|
| HVDC input characteristics | - 240V HVDC rated voltage: 240V DC.
- 240V HVDC maximum voltage range: 188V DC~290V DC.
- 380V HVDC rated voltage range: 240V DC~380V DC.
- 380V HVDC maximum voltage range: 188V DC~400V DC.
|
| Rated input current | - 1200W AC &240V DC power module (PAC-1K2WA series): 10A(100V AC~130V AC)/8A(200V AC~240V AC)/8A(240V DC).
- 1200W HVDC power module (PHD-1K2WA series): 8A (240V DC~380V DC)
- 1200W DC power module (PDC-1K2WA series): 38A (-48V DC~-60V DC).
|
| Power consumption of the whole machine | Maximum power consumption | 965W |
| Typical power consumption | 375W (100% loaded, 64-port QSFP28 high-speed cable, dual power supply) |
| Heat consumption of the whole machine | Maximum heat consumption | 3293BTU/hr |
| Typical heat loss | 1280BTU/hr (100% load, 64-port QSFP28 high-speed cable, dual power supply) |
| Lightning Protection Specifications | Power Protection:- AC: common mode 4kV, differential mode 2.5kV.
- DC: Common mode 4kV, differential mode 2kV.
|
| Cooling | Heat dissipation | Air-cooled heat dissipation |
| Heat dissipation air duct | Front and rear air ducts, depending on the selected fan module and power module. |
| Reliability and availability | Power module backup | 1+1 backup is supported. |
| Fan module backup | It supports 2+1 backup, and the system supports normal operation in a short period of time after a single fan module fails, but it is recommended to replace the faulty fan module immediately.Illustrate:CE8850EI configuration uses three fan modules, each of which contains one fan and supports 2+1 fan backup. |
| Hot-swappable | Power modules and fan modules are hot-swappable. |
| MTBF (years) | 45.34 |
| Mean time to repair MTTR (hours) | 1.68 |
| Availability | 0.999997043 |
| Technical Indicators | processor | 8 cores, 1.5GHz |
| DRAM Memory | 4GB |
| NOR Flash | 32MB |
| NAND Flash | 2GB |
| stack | Interfaces that support service port stacking | 100GE optical port |
| Product Certification | - Follow safety standards
- Follow EMC standards
- Follow environmental and environmental standards
|
Ordering Information
Due to product version upgrades, ordering information is updated from time to time. This manual is for reference only, for accurate ordering information, please contact your HW switch dealer or Hw local representative.
Ordering information is provided in Table 2-351.Table 2-351 Ordering Information Table| Part code | Part number | Part description |
|---|
| 02351RFF | CE8850-64CQ-EI | CE8850-64CQ-EI Switch (64 x 100GE QSFP28, 2 x 10GE SFP+, excluding fan enclosure and power supply) |
| 02351RFJ | CE8850-EI-F-B0B | CE8850-64CQ-EI Switch (64 x 100GE QSFP28, 2 x 10GE SFP+, 2 x AC power supply, 2 x fan box, and port-side air outlet) |
| 02351RFH | CE8850-EI-B-B0B | CE8850-64CQ-EI Switch (64 x 100GE QSFP28, 2 x 10GE SFP+, 2 x AC power supply, 2 x fan box, and port-side air inlet) |
Address:
Building 2, No. 1 Shangdi Information Road, Haidian District, Beijing, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Computer Products, Consumer Electronics, Security & Protection
Company Introduction:
Beijing Zhongwang Shujian Technology Co., Ltd. Is a service limited integration company that sells network equipment and software.
We mainly sell switch equipment, network switches, data switches, routers, routing gateways, hardware firewalls, WEB firewalls, servers, storage servers, UPS power supplies, communication power supplies, Huawei Cloud, optical access equipment, wireless APs, network management software, and other products.
The company has collaborated with telecommunications equipment manufacturers such as Huawei, H3C, Ruijie, Shenxin, and Tianrongxin, winning the trust of a large number of users. Provide customers with network park design and planning, data center system construction, wireless factory coverage, equipment installation, debugging, maintenance, etc.
Openness, cooperation, and win-win are the cornerstone of China Open Data Construction Company′s service to various industries. In the future, we will continue to uphold the values of innovation, responsibility, and service first, guided by customer needs, and continuously optimize our products and services. We will continue to expand our market coverage, expand into new business areas, and enhance our company′s influence in the industry. At the same time, we will actively embrace new technologies, continuously enhance our core competitiveness, and lay a solid foundation for achieving sustained growth and long-term development.
Together, there is a future.
){kind=link}