Basic Info.
Communication Mode
Full-Duplex & Half-Duplex
Transmission Rate
10/100/1000/10000
Product Description
S5731-S24P4X (02353AHX/02353AHX-001/02353AHX-003)
Version Mapping
Table 4-1223 lists the mapping between the S5731-S24P4X chassis and software versions.
Table 4-1223 Version mappingSeries | Model | Software Version |
|---|
S5731-S | S5731-S24P4X | 02353AHX: V200R019C00 and later versions 02353AHX-001: V200R020C10 and later versions 02353AHX-003: V200R021C10SPC600 and later versions (If V200R021C10SPC500 is used, install V200R021HP0121 or a later patch.) |
Appearance and Structure
Figure 4-484 S5731-S24P4X (02353AHX) appearance
Figure 4-485 S5731-S24P4X (02353AHX-001/02353AHX-003) appearance
1 | Twenty-four PoE+ 10/100/1000BASE-T ports | 2 | Four 10GE SFP+ ports Applicable modules and cables: - GE optical module
- GE-CWDM optical module
- GE-DWDM optical module
- GE copper module (100M/1000M auto-sensing)
- 10GE SFP+ optical module (OSXD22N00 not supported)
- 10GE-CWDM optical module
- 10GE-DWDM optical module
- 1 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables
- 3 m and 10 m SFP+ AOC cables
- 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking)
|
3 | One console port | 4 | One ETH management port |
5 | One USB port | 6 | One PNP button NOTICE:To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button. |
7 | Ground screw NOTE:It is used with a ground cable. | 8 | Fan module slot 1 NOTE:Applicable fan module: FAN-023A-B (Fan box(B,FAN panel side exhaust)) |
9 | Fan module slot 2 NOTE:Applicable fan module: FAN-023A-B (Fan box(B,FAN panel side exhaust)) | 10 | Power module slot 1 NOTE:Applicable power module: - PAC1000S56-CB (02312KND: 1000 W PoE AC&240 V DC Power Module)
- PAC1000S56-CB (02312KND-001: 1000 W PoE AC&240 V DC Power Module) (applicable in V200R019C10 and later versions)
- PAC1000S56-DB (1000 W PoE AC&240 V DC Power Module) (applicable in V200R020C10 and later versions)
- PDC1000S56-CB (1000 W PoE DC Power Module) (applicable in V200R021C00 and later versions)
- PAC600S56-CB (600 W PoE AC&240 V DC Power Module (Back to Front, Power panel side exhaust)) (applicable in V200R021C10 and later versions)
|
11 | Power module slot 2 NOTE:Applicable power module: - PAC1000S56-CB (02312KND: 1000 W PoE AC&240 V DC Power Module)
- PAC1000S56-CB (02312KND-001: 1000 W PoE AC&240 V DC Power Module) (applicable in V200R019C10 and later versions)
- PAC1000S56-DB (1000 W PoE AC&240 V DC Power Module) (applicable in V200R020C10 and later versions)
- PDC1000S56-CB (1000 W PoE DC Power Module) (applicable in V200R021C00 and later versions)
- PAC600S56-CB (600 W PoE AC&240 V DC Power Module (Back to Front, Power panel side exhaust)) (applicable in V200R021C10 and later versions)
| - | - |
Port Description
10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s, and must use an
Ethernet cable.
Table 4-1224 describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.
Table 4-1224 Attributes of a 10/100/1000BASE-T Ethernet electrical portAttribute | Description |
|---|
Connector type | RJ45 |
Standards compliance | IEEE802.3, IEEE802.3u, IEEE802.3ab |
Working mode | 10/100/1000 Mbit/s auto-sensing |
Maximum transmission distance | 100 m |
10GE SFP+ optical port
A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s.
Table 4-1225 describes the attributes of a 10GE SFP+ Ethernet optical port.
Table 4-1225 Attributes of a 10GE SFP+ portAttribute | Description |
|---|
Connector type | LC/PC |
Optical port attributes | Depend on the optical module used |
Standards compliance | IEEE802.3ae |
Working mode | GE/10GE auto-sensing |
Console port
The console port is connected to a console for on-site configuration. The port must use a
console cable. The console port is used when a switch is powered on for the first time. For details about the attributes of a console port, see
Table 4-1226.
Table 4-1226 Attributes of a console portAttribute | Description |
|---|
Connector type | RJ45 |
Standards compliance | RS-232 |
Working mode | Duplex Universal Asynchronous Receiver/Transmitter (UART) |
Baud rate | 9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s Default value: 9600 bit/s |
ETH management port
You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely. The port must use an
Ethernet cable. You can choose to download the software package through the ETH management port in the BootLoad menu. File transfer through the ETH management port is faster than transfer through the console port.
Table 4-1227 describes the attributes of an ETH management port.
Table 4-1227 Attributes of an ETH management portAttribute | Description |
|---|
Connector type | RJ45 |
Standards compliance | IEEE802.3 |
Working Mode | 10/100 Mbit/s auto-sensing |
Maximum transmission distance | 100 m |
In V200R012C00 and later versions, you can log in to the switch that contains the ETH management port for the first time through the ETH port. For details, see "First Login to a Switch" in the
Configuration Guide - Basic Configuration. If you have logged in to the switch for the first time by pressing and holding the MODE button for 6 seconds or longer and saved the configuration, the default configuration on the ETH port will be cleared. In this case, you cannot log in to the switch for the first time through the ETH port. You are advised to log in to the switch for the first time through the ETH port.
USB port
The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0.
USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. Switches support a maximum of 128 GB USB flash drives.
Indicator Description
The S5731-S24P4X has the same types of indicators as the S5731-S48P4X. For details, see Indicator Description.
Power Supply Configuration
The switch is a PoE switch and supports two power module slots, each of which can have a 1000 W PoE or 600 W PoE power module installed. Pluggable AC and DC PoE power modules can be used together in the same switch.
Table 4-1228 Power supply configurationsPower Module 1 | Power Module 2 | Available PoE Power | Maximum Number of Ports (Fully Loaded) |
|---|
1000 W AC (220 V) 1000 W DC | - | 760 W | - 802.3af (15.4 W per port): 24
- 802.3at (30 W per port): 24
|
1000 W AC (110 V) | - | 665 W | - 802.3af (15.4 W per port): 24
- 802.3at (30 W per port): 22
|
1000 W AC (220 V) 1000 W DC | 1000 W AC (220 V) 1000 W DC | 1600 W | - 802.3af (15.4 W per port): 24
- 802.3at (30 W per port): 24
|
1000 W AC (110 V) 1000 W DC | 1000 W AC (110 V) | Versions earlier than V200R021C10: 1330 W V200R021C10 and later versions: 1520 W | - 802.3af (15.4 W per port): 24
- 802.3at (30 W per port): 24
|
600 W AC (220 V) | - | 380 W | - 802.3af (15.4 W per port): 24
- 802.3at (30 W per port): 12
|
600 W AC (110 V) | - | 95 W | - 802.3af (15.4 W per port): 6
- 802.3at (30 W per port): 3
|
600 W AC (220 V) | 600 W AC (220 V) | 950 W | - 802.3af (15.4 W per port): 24
- 802.3at (30 W per port): 24
|
600 W AC (110 V) | 600 W AC (110 V) | 380 W | - 802.3af (15.4 W per port): 24
- 802.3at (30 W per port): 12
|
1000 W AC (220 V) 1000 W DC | 600 W AC (220 V) | 1330 W | - 802.3af (15.4 W per port): 24
- 802.3at (30 W per port): 24
|
When a switch has two power modules installed, the two power modules work in redundancy mode to provide power for the chassis and in load balancing mode to provide power for PDs.
Heat Dissipation
The S5731-S24P4X uses pluggable fan modules for forced air cooling. Air flows in from the front side and exhausts from the rear panel.
Technical Specifications
Table 4-1229 lists technical specifications of the S5731-S24P4X.
Table 4-1229 Technical specificationsItem | Description |
|---|
Memory (RAM) | 2 GB |
Flash | 1 GB in total. To view the available flash memory size, run the display version command. |
Mean time between failures (MTBF) | 57.21 years |
Mean time to repair (MTTR) | 2 hours |
Availability | > 0.99999 |
Service port surge protection | Common mode: ±6 kV |
Power supply surge protection | - Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode
- Using DC power modules: ±2 kV in differential mode, ±4 kV in common mode
|
Dimensions (H x W x D) | - Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.)
- Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 448.0 mm (1.72 in. x 17.4 in. x 17.7 in.)
|
Weight (with packaging) | 8.6 kg (18.96 lb) |
Stack ports | 10GE SFP+ ports on the front panel |
RTC | Supported |
RPS | Not supported |
PoE | Supported |
Rated voltage range | - AC input: 100 V AC to 130 V AC, 200 V AC to 240 V AC, 50/60 Hz
- High-Voltage DC input: 240 V DC
- DC input: -48 V DC to -60 V DC
|
Maximum voltage range | - AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz
- High-Voltage DC input: 190 V DC to 290 V DC
- DC input: -38.4 V DC to -72 V DC
|
Maximum power consumption (100% throughput, full speed of fans) | - Not providing the PoE function: 121 W
- 100% PoE loads: 977 W (PoE: 720 W)
|
Typical power consumption (30% of traffic load, tested according to ATIS standard) | 95 W |
Operating temperature | -5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE:When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The switch cannot be started when the ambient temperature is lower than 0°C (32°F). |
Storage temperature | -40°C to +70°C (-40°F to +158°F) |
Noise under normal temperature (27°C, sound power) | < 62.3 dB(A) |
Relative humidity | 5% to 95%, noncondensing |
Operating altitude | 0-5000 m (0-16404 ft.) |
Certification | - EMC certification
- Safety certification
- Manufacturing certification
|
Part number | 02353AHX 02353AHX-001 02353AHX-003 |
Address:
Building 2, No. 1 Shangdi Information Road, Haidian District, Beijing, China
Business Type:
Manufacturer/Factory
Business Range:
Computer Products, Construction & Decoration, Consumer Electronics, Security & Protection, Service
Company Introduction:
Beijing Zhongwang Shujian Technology Co., Ltd. Is a service limited integration company that sells network equipment and software.
We mainly sell switch equipment, network switches, data switches, routers, routing gateways, hardware firewalls, WEB firewalls, servers, storage servers, UPS power supplies, communication power supplies, Huawei Cloud, optical access equipment, wireless APs, network management software, and other products.
The company has collaborated with telecommunications equipment manufacturers such as Huawei, H3C, Ruijie, Shenxin, and Tianrongxin, winning the trust of a large number of users. Provide customers with network park design and planning, data center system construction, wireless factory coverage, equipment installation, debugging, maintenance, etc.
Openness, cooperation, and win-win are the cornerstone of China Open Data Construction Company′s service to various industries. In the future, we will continue to uphold the values of innovation, responsibility, and service first, guided by customer needs, and continuously optimize our products and services. We will continue to expand our market coverage, expand into new business areas, and enhance our company′s influence in the industry. At the same time, we will actively embrace new technologies, continuously enhance our core competitiveness, and lay a solid foundation for achieving sustained growth and long-term development.
Together, there is a future.
