Basic Info.
Communication Mode
Full-Duplex & Half-Duplex
Product Description
S5735-S24T4X
Software Companionship
Table 4-2027 lists the matching relationships between the S5735-S24T4X devices and software versions.Table 4-2027 Supporting Relationships| Equipment series | Device model | Imprint |
|---|
| S5735-S | S5735-S24T4X | V200R019C00 and later releases are supported.Illustrate:V200R021C01 version is not supported. |
Appearance structure
Figure 4-713 S5735-S24T4X appearance
| 1 | 24 x 10/100/1000BASE-T Ethernet interfaces | 2 | 4 x 10GE SFP+ Ethernet optical interfacesSupported Modules and Cables:- GE Optical Transceivers
- GE-CWDM color optical module
- GE-DWDM color optical module
- GE Optoelectronic Modules (100M/1000M Auto-Negotiation)
- 10GE SFP+ Optical Transceiver (OSXD22N00 not supported)
- 10GE-CWDM optical transceiver
- 10GE-DWDM optical transceiver
- 1m, 3m SFP+ high-speed cable
- 3m, 10m SFP+ AOC optical cable
- 0.5m, 1.5m SFP+ dedicated stacking cable (for configuration-free stacking only, supported in V200R019C10 version and later)
|
| 3 | 1 console interface | 4 | 1 ETH management interface |
| 5 | 1 USB port | 6 | 1 PNP buttonNotice:Press and hold (6s or more): Restore the factory configuration and reset the device.
Short press: Reset the device.
Resetting the device may interrupt the service and should be used with caution. |
| 7 | Grounding screwsIllustrate:Use a grounding cable. | 8 | Power module slot 1Illustrate:Supported Power Modules:- PAC60S12-AR (60W AC &240V DC Power Module)
- PDC1000S12-DB (1000W DC Power Module)
- PDC180S12-CR (180W DC Power Module) (supported V200R020C00 and later)
|
| 9 | Power module slot 2Illustrate:Supported Power Modules:- PAC60S12-AR (60W AC &240V DC Power Module)
- PDC1000S12-DB (1000W DC Power Module)
- PDC180S12-CR (180W DC Power Module) (supported V200R020C00 and later)
| - | - |
API description
10/100/1000BASE-T Ethernet electrical interfaceThe 10/100/1000BASE-T Ethernet electrical interface is mainly used for receiving and transmitting 10 Mbit/100/Gigabit services, and needs to be matched with network cables. Table 4-2028 lists the interface properties of 10/100/1000BASE-T Ethernet electrical interfaces.Table 4-2028 10/100/1000BASE-T Ethernet electrical interface attributes| attribute | description |
|---|
| Connector type | RJ45 |
| Meets standards | IEEE802.3,IEEE802.3u,IEEE802.3ab |
| Working mode | 10/100/1000Mbit/s self-adaptation |
| Longest effective distance | 100m |
10GE SFP+ Ethernet optical interfaceThe 10GE SFP+ Ethernet optical interface supports 1000M adaptation and is mainly used for receiving and transmitting Gigabit and 10000M services. Table 4-2029 lists the interface attributes of a 10GE SFP+ Ethernet optical interface.Table 4-2029 10GE SFP+ Ethernet interface attributes| attribute | description |
|---|
| Connector type | LC/PC |
| Optical interface properties | It depends on the selected optical module |
| Meets standards | IEEE802.3ae |
| Working mode | 10GE/GE Adaptive |
Console interfaceThe console interface is used to connect to the console and realize the on-site configuration function, and the console communication cable needs to be used. When the device is powered on for the first time, you need to use the console interface to configure the interface properties of the console interface, as shown in Table 4-2030.Table 4-2030 Console interface properties| attribute | description |
|---|
| Connector type | RJ45 |
| Meets standards | RS-232 |
| Working mode | UART(Universal Asynchronous Receiver/Transmitter) |
| baud rate | 9600bit/s,19200bit/s,38400bit/s,57600bit/s,115200bit/s
The default value is 9600 bit/s |
ETH management interfaceThe ETH management interface is used to connect with the network port of the configuration terminal or network management workstation to build an on-site or remote configuration environment, and a network cable needs to be used. Under the BootLoad menu, you can select the ETH management interface to load the software version package, which is faster than the console interface. Table 4-2031 lists the interface attributes of the ETH management APIs.Table 4-2031 ETH interface attributes| attribute | description |
|---|
| Connector type | RJ45 |
| Meets standards | IEEE802.3 |
| Working mode | 10/100 Mbit/s self-adaptive |
| Longest effective distance | 100m |
V200R012C00 and later versions, switches with ETH management interfaces support the first login to a device using the ETH port. If you have logged in to the device for the first time with the mode button (press and hold the mode button for 6s or more) and saved the configuration, the default configuration on the ETH port will be cleared, and you cannot log in for the first time using the ETH port. It is recommended to use the ETH port to log in to the device for the first time. USB interfaceThe USB port can be used with a USB flash drive, which can be used for deployment, transfer configuration files, upgrade files, etc. The USB flash drive must support the USB 2.0 standard.Due to the differences in the compatibility and drivers of USB flash drive models of different manufacturers, if the USB flash drive cannot be used, please try to replace the USB flash drive of the mainstream manufacturer, and the switch supports a USB flash drive with a capacity of no more than 128GB.
Indicator light description
The S5735-S24T4X does not have a PoE status indicator, and the other indicators are identified, and their meanings are the same as those of the S5735-S24P4X.Power configuration
There are two types of power supply configuration modes: single power supply and dual power supply, and when the power supply is dual power supply, the power supply to the host is 1+1 redundant backup mode. Pluggable AC and DC power modules can be configured on the same device at the same time, but power modules with natural heat dissipation and air cooling power modules cannot be mixed.Principle of heat dissipation
The S5735-S24T4X device has two built-in fans, and the heat dissipation type is fan forced heat dissipation, and the airflow direction is left, right, front air, and rear air outlet. The device in the diagram is only used as a schematic illustration of the direction of the airflow.
Specifications
Table 4-2032 lists the specifications of the S5735-S24T4X.Table 4-2032 Specifications and parameters| specification | parameter |
|---|
| Memory (RAM) | 1GB |
| Flash | The physical space is 512 MB, and the actual available space can be viewed by running the display version command |
| MTBF (years) | 69.42 |
| Mean time to repair MTTR (hours) | 2 |
| Availability | Greater than 0.99999 |
| Specifications for lightning protection at the business port | Common mode ± 7kV (maximum support ±10kV, no damage to the device) |
| Lightning protection specifications of the power port | - Configure AC power module: differential mode ± 6kV, common mode ± 6kV
- Configure DC power module: differential mode ± 2kV, common mode ± 4kV
|
| Dimensions (W×D×H) | - Basic dimensions (depth is the distance excluding the protruding structural parts of the front and rear panels): 442.0mm× 420.0mm×43.6mm
- Maximum dimensions (depth is the maximum distance from the port protruding from the front panel to the rear panel module handle): 442.0mm× 444.2mm×43.6mm
|
| Weight (including packaging materials) | 7.21kg |
| Stacking ports | Any 10/100/1000BASE-T Ethernet electrical interface or 10GE SFP+ Ethernet optical interface (supported in V200R019C10 and later versions) |
| RTC | In the tank |
| RPS | Not supported |
| PoE | Not supported |
| Rated voltage range | - AC input: 100V AC~240V AC; 50/60Hz
- High voltage DC input: 240V DC
- DC input: -48V DC~-60V DC
|
| Maximum voltage range | - AC input: 90V AC~264V AC; 47Hz~63Hz
- High voltage DC input: 190V DC~290V DC
- DC input: -38.4V DC~-72V DC
|
| Maximum power consumption (100% flow, full fan speed) | 46W |
Typical Power Consumption (30% Flow)- Tested in accordance with ATIS standards
- Enable EEE
- No PoE power consumption
| 31W |
| Operating temperature range | -5°C~+50°C(0m~1800m)Illustrate:1800m~5000m, the maximum temperature specification decreases by 1°C for every 220m above sea level.
The device does not support starting when the ambient temperature is below 0°C. |
| Short-term operating temperature range | -5°C~+55°C(0m~1800m)Illustrate:1800m~5000m, the maximum temperature specification decreases by 1°C for every 220m above sea level.The device supports short-term operation beyond the normal operating temperature range, provided that the following conditions are met:- The operating temperature exceeds 45 degrees for up to 96 consecutive hours in a year
- The total time that the operating temperature exceeds 45 degrees in a year is not more than 360 hours
- The number of times the working temperature exceeds 45 degrees in a year is not more than 15 times
If one of the above three conditions is exceeded, it is considered to be over-spec use, which may cause damage to the equipment or unknown conditions. The device does not support starting when the ambient temperature is below 0°C. The maximum distance of the optical module for short-term operation cannot exceed 10 km. |
| Storage temperature range | -40°C~+70°C |
| Noise at room temperature (27°C, sound power) | Less than 58.9dB(A) |
| Relative humidity range | 5%RH~95%RH, non-condensing |
| Working altitude | 0m~5000m |
| Product Certification | - EMC certification is supported
- Support safety certification
- Support for production certification
|
| Part code | 98010938 |
Address:
Building 2, No. 1 Shangdi Information Road, Haidian District, Beijing, China
Business Type:
Manufacturer/Factory
Business Range:
Computer Products, Construction & Decoration, Consumer Electronics, Security & Protection, Service
Company Introduction:
Beijing Zhongwang Shujian Technology Co., Ltd. Is a service limited integration company that sells network equipment and software.
We mainly sell switch equipment, network switches, data switches, routers, routing gateways, hardware firewalls, WEB firewalls, servers, storage servers, UPS power supplies, communication power supplies, Huawei Cloud, optical access equipment, wireless APs, network management software, and other products.
The company has collaborated with telecommunications equipment manufacturers such as Huawei, H3C, Ruijie, Shenxin, and Tianrongxin, winning the trust of a large number of users. Provide customers with network park design and planning, data center system construction, wireless factory coverage, equipment installation, debugging, maintenance, etc.
Openness, cooperation, and win-win are the cornerstone of China Open Data Construction Company′s service to various industries. In the future, we will continue to uphold the values of innovation, responsibility, and service first, guided by customer needs, and continuously optimize our products and services. We will continue to expand our market coverage, expand into new business areas, and enhance our company′s influence in the industry. At the same time, we will actively embrace new technologies, continuously enhance our core competitiveness, and lay a solid foundation for achieving sustained growth and long-term development.
Together, there is a future.
