Soil Moisture Sensor, Soil Temperature Sensor
| US$59.00 | 1 Piece (MOQ) |
Port:
Dalian, China
Payment Terms:
L/C, T/T, D/P, Paypal
Dalian Endeavour Technology Co., Ltd.
Liaoning, China
Last Login Date:
Jun 23, 2025
Main Products:
Soil Moisture Sensor, Soil Temperature Sensor, Soil Ec Sensor, Ambient Light Sensor, Soil Moisture&Temperature Meter, Soil Humidity Sensor
Find Similar Products
Product Description
Company Info
Product Description
This MS10 soil moisture & temperature sensor is provided with high accurate and high sensitive. By measuring the dielectric constant of the reaction of soil, soil direct stable real moisture content.This MS10 soil moisture & temperature sensor can measure the volume of soil moisture.the soil moisture measurement method is in line with international standards at present.Apply to the soil moisture monitoring, scientific experiment, water-saving irrigation, greenhouse vegetables, flowers, grass, soil, plant cultivation, measured speed of sewage treatment, grain storage, greenhouse control, precision agriculture, at the same time in the measurement of water, weather and particulate matter content.
3 Connection
3.1 Connection Guide
4 Package size, Ordering info, and installation guide4.1 Package size
4.2 Selection Order
4.3 Installation GuideRapid measurement method: the selected measurement locations, the right to avoid the rocks, to ensure that the needle will not touch the stones like hard object, according to the required depth of cut open the surface soil, maintain the tightness degree of the original soil below the sensor body, clenched vertically inserted into the soil, can not be inserted before and after shaking, ensure the close contact with the soil. A measuring point within a small range test should repeatedly averaging.
Buried in the underground measurement method: vertical drilling diameter greater than 20 cm depth of pit, according to the measurement needs, then the sensor wire inserted into the pit wall in a given level of depth, the pit landfill compaction, ensure the close contact with the soil. Stable after a period of time, can be last for days, months or even longer to measure and record.
If the surface measurement is hard, should first hole (diameter should be less than the diameter of the probe), and then inserted into the soil and the soil compaction and measurement; sensor should prevent violent vibration and impact, but not with a hard object percussion. Because the sensor for black package, in the strong sunlight will make the sensor to make sharp warming (up to over 50 DEG C), in order to prevent the temperature measurement of high temperature impact sensor, please pay attention to sun protection in the field or fields5 The conversion for soil moisture volume percentage,temperature and output
Note: The unit of voltage formula for V (V), the current unit is ma (mA)
- High measuring accuracy, fast response, good interchangeabilityGood sealing performance, corrosion resistance, long buried in soil usingThe flame retardant epoxy resin curing, completely waterproof, can withstand the strong external shocksNeedle using quality materials, can withstand long-term electrolysis, can withstand the corrosion of acid and alkali in the soilHigh measuring precision, reliable performance, the effects of soil salt content is small, suitable for all kinds of soilHaving power reverse protection
| technical parameter | |||
| The signal output type | Output voltage 0-2V output impedance <1Kohm | current output 4-20mA load resistance <500ohm | RS485 interface, Modbus protocol |
| Power supply voltage | 5-30V/DC | 12-30V/DC | 5-30V/DC |
| Maximum power dissipation | 40mA@24V DC | 80mA@24V DC (When the two current output channel is 20mA) | 30mA@24V DC |
| Soil moisture measurement area | The probe as the center, the diameter of 7cm, height of 7cm cylinder | ||
| Response time (moisture and temperature) | Less than 1 second | ||
| Soil moisture measurement range | Optional range: 0-30% volumetric moisture content 0-50% volumetric moisture content 0-100% volumetric moisture content | ||
| Soil moisture measurement accuracy | 0-53% range is ± 3%; 53-100% range is ± 5% | ||
| Soil temperature measuring range | -40~80ºC | ||
| The measurement precision of soil temperature | ±0.5ºC | ||
| Protection grade | IP68 | ||
| Operating environment | -40~85ºC | ||
| The storage environment | -40~85ºC | ||
| The material of the probe | Food grade stainless steel | ||
| Sealing material | The black flame retardant epoxy resin | ||
| Installation | All buried or probe into all of the measured medium | ||
3 Connection
3.1 Connection Guide
| Model | Wiring diagram |
| Voltage output type | Red (V+): Power Supply Black (G): power ground Blue (O1): the output signal (temperature) Brown (O2): the output signal (moisture) Yellow: do not connect White: do not connect Green: do not connect |
| Current output type | Red (V+): Power Supply Black (G): power ground Blue (O1): the output signal (temperature) Brown (O2): the output signal (moisture) Yellow: do not connect White: do not connect Green: do not connect |
| RS485 interface type The Modbus protocol | Red (V+): Power Supply. Black (G): power ground Blue (O1): do not connect Brown (O2): do not connect Yellow (T+): RS485+/A/T+ White (T-): RS485-/B/T- Green (SET): V+ (power) when boot module into the "setting mode". Not connected or connected with the G (power) when boot into "mode of operation". Module configuration parameters such as Modbus address, baud rate, parity, communication protocol is composed of module inside the EEPROM (power down storage device stores). The specific configuration sometimes forget these parameters that cannot communicate with the module. In order to prevent this problem, the module has a special mode called "mode". When the module is based on the "mode" electric start, the module communicates with the following parameters: Fixed Modbus address 0 Communication configuration is 9600, N, 8,1 (9600bps, no parity bit, 8 data bits, a stop bit) Communication protocol for Modbus-RTU Configuration parameters in EEPROM will not because the module into the "mode" and "will change, when the module is in communication with in the EEPROM configuration parameter is still running mode". |
4.2 Selection Order
| Series | Code 1 | Measurement parameters | |||||
| MS10- | A B | Soil volumetric water content (VWC) and temperature Soil volumetric water content (VWC) | |||||
| Code 2 | The range of volumetric water content of soil | ||||||
| A B C | 0-100% 0-50% 0-30% | ||||||
| Code 3 | Output signal | ||||||
| A B C D E F G | Output voltage 0-2V The current output of 4-20mA RS485 interface, Modbus protocol RS485 interface, Modbus protocol and the 0-2V RS485 interface, Modbus protocol and 4-20mA The SDI-12 interface Custom | ||||||
| Type example: The MS10 series, the soil volumetric water content (VWC) and temperature, soil volumetric water content range of 0-100%, RS485 interface, Modbus protocol. The selection of the code as follows: | |||||||
| MS10- | A | A | C | ||||
Buried in the underground measurement method: vertical drilling diameter greater than 20 cm depth of pit, according to the measurement needs, then the sensor wire inserted into the pit wall in a given level of depth, the pit landfill compaction, ensure the close contact with the soil. Stable after a period of time, can be last for days, months or even longer to measure and record.
If the surface measurement is hard, should first hole (diameter should be less than the diameter of the probe), and then inserted into the soil and the soil compaction and measurement; sensor should prevent violent vibration and impact, but not with a hard object percussion. Because the sensor for black package, in the strong sunlight will make the sensor to make sharp warming (up to over 50 DEG C), in order to prevent the temperature measurement of high temperature impact sensor, please pay attention to sun protection in the field or fields5 The conversion for soil moisture volume percentage,temperature and output
| Model | The parameter range | conversion relation |
| Output voltage 0-2V | corresponding temperature of -40-80 ºC | Temperature =60.0* voltage -40. If the measured voltage is 1.5V, the temperature of =60.0*1.5-40=50.00 ºC. |
| volumetric water content corresponding 0-30% | volumetric moisture content=0.15*voltage . If the measured voltage is 1.5V, the volumetric water content was =0.15*1.5= 0.225=22.5%. | |
| volumetric water content corresponding 0-50% | volumetric moisture content=0.25*voltage . If the measured voltage is 1.5V, the volumetric water content was =0.25*1.5=0.375=37.5%. | |
| volumetric water content corresponding 0-100% | volumetric moisture content=0.5* voltage . If the measured voltage is 1.5V, the volumetric water content was =0.5*1.5=0.75=75.0%. | |
| Current output of 4-20mA | corresponding temperature of -40-80ºC | temperature =7.5 * Current -70 . If the measured current is 10mA, the temperature of =7.5*10-70=5.00 ºC. |
| volumetric water content corresponding 0-30% | Volumetric water content = 0.01875 * (current -4). If the measured current is 10mA, the volumetric water content was =0.01875 * (10-4) = 0.1125 =11.25%. | |
| volumetric water content corresponding 0-50% | Volumetric water content = 0.03125 * (current -4). If the measured current is 10mA, the volumetric water content was =0.03125 * (10-4) = 0.1875 =18.75%. | |
| volumetric water content corresponding 0-100% | Volumetric water content = 0.0625 * (current -4). If the measured current is 10mA, the volumetric water content was =0.0625 * (10-4) = 0.375=37.5%. | |
| RS485 interface, Modbus protocol | corresponding temperature of -40-80ºC | Temperature = temperature register value /100. If the read data is 2013, then the temperature = 2013/100=20.13 C. |
| volumetric water content corresponding 0-30% volumetric water content corresponding 0-50% volumetric water content corresponding 0-100% | Volumetric water content = volumetric moisture content register value /10000. If the read data is 1568, then the temperature = 1568/10000=15.68%. | |
| Custom | The output of models, please contact technical support. |
Address:
Room 604. Building 1. Xuezi Street, Qixian Road, Hi-Tech Zone, Dalian, Liaoning, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters
Company Introduction:
Dalian Endeavour Technology Co., Ltd. Is located in the beautiful coastal city of Dalian, is set research and development, production and sales in one of the professional manufacturer of instrument. Since the establishment of the company, followed by intelligent instrument technology development trend of the world, focusing on the intelligent instrument of research, development and production, has to apply for a number of national patents, and has industrial construction projects provide tens of thousands of intelligent instruments.
Our company always adhere to the "quality first, users first" business philosophy, under the severe competition environment, still pay to adhere to the selection of high-end devices, in accordance with the ISO9000 quality management system for each process to implement strict process management to ensure every piece of products are very stable and reliable, won the unanimous praise of users at home and abroad and engineering business.
Dalian zhe Qin technology has a strong technical research and development team, to master the core technology of intelligent instruments, with full intellectual property rights. According to the needs of users, to provide a complete solution and the production of customized products.
With the progress of industrial automation detection and control technology, Dalian zhe frequently technology keeping pace with the times, research and development production intelligent agricultural sensor and transmitter, intelligent multi channel heat resistance acquisition module, multi-channel galvanic acquisition module, multi function intelligent signal acquisition module, control system of cold storage, physical cloud data acquisition management advanced hardware and software products. In the face of opportunities and challenges, the company will work with the vast number of users and engineering companies to cooperate in good faith, mutual benefit and win-win, to create a better future for industrial automation.
Our company always adhere to the "quality first, users first" business philosophy, under the severe competition environment, still pay to adhere to the selection of high-end devices, in accordance with the ISO9000 quality management system for each process to implement strict process management to ensure every piece of products are very stable and reliable, won the unanimous praise of users at home and abroad and engineering business.
Dalian zhe Qin technology has a strong technical research and development team, to master the core technology of intelligent instruments, with full intellectual property rights. According to the needs of users, to provide a complete solution and the production of customized products.
With the progress of industrial automation detection and control technology, Dalian zhe frequently technology keeping pace with the times, research and development production intelligent agricultural sensor and transmitter, intelligent multi channel heat resistance acquisition module, multi-channel galvanic acquisition module, multi function intelligent signal acquisition module, control system of cold storage, physical cloud data acquisition management advanced hardware and software products. In the face of opportunities and challenges, the company will work with the vast number of users and engineering companies to cooperate in good faith, mutual benefit and win-win, to create a better future for industrial automation.
Send your message to this supplier
