Basic Info.
Product Description
Product Description
Please read the user manual carefully before installation, so as to get the correct installation method and quick operation. If the appearance and color of the product are changed, please refer to the actual product!1. Product functions & parameters1.1. Product functions:Location query, historical route playback, geo-fence, inflection point supplementary transmission, blind zone supplementary transmission, parking report, voltage detection, overspeed alarm, displacement alarm, power failure alarm (optional), SOS emergency (optional), remote voice record(optional), voice broadcast (optional), temperature detection (optional), remote oil and electricity cut off (optional), remote photographing (optional), fuel level detection (optional), etc.(Note: Different models with different functions, please refer to corresponding models.) 1.2 Product parametersNetwork standard: 2G (optional)Wide voltage input range: 9-50V/9-75V/9-95V (optional);Positioning time: average hot start: ≤3sec(open sky)average cold start: ≤35sec(open sky)Positioning accuracy: ≤10m (open sky)Working temperature: -20ºC-75ºCImportant tips: Please install and use correctly within the tolerance range of the equipment performance, if any illegal installation exceeds the equipment performance tolerance range, all the consequences caused by the user shall be borne by themselves!2. Product accessories and LED status2.1 Accessories:Standard: GPS tracker/harness/user manual/double-sides stickerOptional: microphone, SOS button, relay, temperature sensor, camera.2.2 LED status of GPS tracker2.2.1 Red LED (power supply/working status)| LED status | Meaning |
| On all the time | Working normally |
| off | shutdown |
| LED status | Meaning |
| Fast flash 1 time within 2 seconds | GSM initialization |
| On all the time | GPRS communication normally/online |
| off | GSM sleep/shutdown |
| LED status | Meaning |
| Fast flash 1 time within 2 seconds | GPS signal searching |
| On all the time | GPS located |
| off | GPS sleep/shutdown |
- Before installing or removing the SIM card, please switch off the power.
- Please active the GPRS function of the SIM card.
- Please active the caller ID display function of the sim card for remote monitoring (select to enable or not according to the function required by the customer).
If your SIM card has been turned on and asked to enter the SIM PIN, please refer to your mobile phone user manual to turn off the SIM PIN input function.- Please make sure that the SIM card has charges.
3.2 installationThe GPS device should be installed at hidden positions. We highly suggest that installed by professional technicians. Please note below items:- Installation position should be as concealed as possible, and be waterproof.
Keep away from emission sources, such as reversing radar, anti-theft device and other vehicle-mounted communication equipment. The device finished with built-in GSM antenna and GPS antenna. When installing, make sure that the front is facing upward (toward the sky), and there is no metal object upside.The recommended installation position as below:The hidden place in the decorative panel under the front windshield of the car.Hidden places around the front dashboard of the car (the skin is made of non-metallic material).(3) Under the decorative panel under the rear windshield of the car.Inside the car door or the center pillar. In the dashboard of the electric vehicle/motorcycle or the hidden place under the rear seat.3.3,Definition of the cables3.3.1 Please use the power cable provided by the original factory. The red cable is the positive pole of the power supply, and the black is the negative pole of the power supply. When installing the negative pole of the power supply, please choose separate grounding or grounding. Do not connect it with other grounding wires.3.3.2 ACC cable (orange cable) connects to ACC switch. If the ACC automatic anti-theft function is required, the ACC line must be connected, and the device will determine whether to enter the fortified state according to the ACC state; if the ACC line is not connected, the vehicle will enter the fortified state. When the vehicle is running in the fortified state, vibration will trigger the vibration alarm.3.3.3 The oil and electricity control cable (yellow cable) should be connected to the thin yellow cable on the relay (optional).(Note: The wiring diagrams are different if different, the specific wiring should refer to the actual product.)3.4 Steps for the correct use of the product: install → start → set → registerInstall: When installing, make sure the GPS antenna face the sky, and the place above the installation location must be covered by materials that do not absorb electromagnetic waves (such as metal, explosion-proof insulation film).Start: Install the SIM card in the correct direction, connect the wires according to the wiring diagram, and then switch on.Set: It must be done, otherwise no other operations can be performed. Use the owner's mobile phone to send a text message to the GPS device SIM card number to set the owner's number and specific number.Register: The registration method depends on the dealer's platform, and the registration method is also different. Please consult the dealer.4. GPS tracker operation instructions4.1 SMS commandThe user uses the mobile phone to send SMS command to the SIM card number of GPS device (note SIM card should be activated the text message function).The comma in below SMS command format is in English input format, and the letters are upper and lower case according to the requirements of the instruction. 4.2 App operationLogin the tracking platform:Users can log in to the global positioning service platform provided by the dealer to check the location and status of the vehicle. For the service platform website, please consult your dealer.1. login and check on web platform:If individual users, please log in with the device ID number. The ID number is on the GPS device and packaging box. When logging in to the platform, please select IEIM/license plate number to log in. The default password is: 123456.For enterprise users and fleet management users, please log in by user name. The user name and password are set by the dealer, please contact the respective dealer to assign.2. Login by Mobile APP:If Android system, please scan the QR code download, and if Apple mobile phone user can search the APP name in the Appstore to download.If individual users, please log in by the GPS device ID number. The ID number is on the GPS device and packaging box. When logging in to the platform, please select IEIM/license plate number to log in. The default password is: 123456.If enterprise users and fleet management users, please log in by user name. The user name and password are set by the dealer, please contact the respective dealer to assign.5. Trouble shooting. Trouble shootingWhen operating the GPS device, if it is not work properly, please refer to the following problems and solutions; if the problem still cannot be solved, please contact the dealer.| Common Problems | Reasons | Solutions |
| Poor signal | Test at areas where there are high buildings or underground parking lots, where radio waves cannot be sent or received normally. | Use it at a good signal place |
platform shows device
not activated after first installation | Main power supply connected correct or not | Do not connect to the main control line of the vehicle |
| SIM inserted not correct | Check the SIM card |
| Check LED status | Check if the indicator is blinking or steady |
| SIM without GPRS activated or SIM card out of charge. | Please contact carrier to activate GPRS or charge |
| Ip and port not correct (can check by SMS command) | Revise the ip and port by SMS command |
Platform map shows
incorrect location
| GPS not locate | Please go to outdoor place where GPS signal is good |
| Vehicle did not move after installation | Please drive the vehicle on the road |
| ACC connected or not | Connect the device and turn on ACC |
| Platform shows the main power disconnect | Poor power supply connection | Check whether the power supply line of the device connected correct or not |
| Platform shows device offline | SIM card out of charge, or GPRS was canceled | Please check your SIM card |
| Weak signal area | Please try again at good signal area |
Address:
8/F, Building F, Digital Silicon Valley, No. 89, Xinhengping Road, Henggang Street, Longgang District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Consumer Electronics, Electrical & Electronics, Instruments & Meters, Security & Protection, Tools & Hardware, Transportation
Company Introduction:
Established in 2011, Shenzhen Liyuan Communications Technology Co., Ltd. is a smart vehicle networking system solution provider with R&D, production, sales, service and integration. It has focused on the smart vehicle networking field for 10 years. It adheres to technology-based, continuous innovation, open cooperation and customizes smart information terminals in the industry:
Development and production of software/hardware based on 2G/3G/4G/CDMA/WCDMA/NB-IOT/eMTC/satellite communication/LORA/Beidou/GPS location service, new energy vehicle TBOX, 4G smart entertainment vehicle terminal, OBD/CANBUS terminal, shared vehicle terminal, etc. Provides competitive terminal and application platform solutions for enterprise customers. The company has more than 100 employees, nearly 10 of whom have undergraduate or higher research and development teams, and have obtained more than 10 patents and computer software copyrights.
