3 Axis CNC Kit NEMA23 425 Oz-in Stepper Motor + 256 Microstep Driver

Package include:
3 X 23HS2430 stepper motor
3 X CW5045 stepper motor driver
1 X 48V/8.3A 400W switching power supply
1 X 5 axis breakout board V5 type
1 X dB25 parallel cable
1 X USB cable

English user manual for breakout board and stepper motor driver will send by email
3 Axis for medium size Router Mill Plasma or Laser

1.5 axis breakout board
It can most connection 5PCS driver and control 5PCS motor in the same time
It is with 4-wire limit switch to insure our safety movement
It is with relay port to contro the CNC spindle
Working voltage is 5VDC and support with MACH3, EMC2, KCAM4 software
Size: 9X5.7cm

2. CW5045 high microstep stepper motor driver
DC power input type: 24V-50VDC
Output current: 1.3A-4.5A
Mircostepping: 1(1.8), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256; 1/5, 1/10, 1/25, 1/50, 1/125, 1/250
Protect form: Overheated protect, lock automatic half current, error connect protect
Working environment: Temperature-15^40deg Humidity< 90%
It is fit for NEMA17-23 two and four phase stepper motors whose current is small than 4.5A, it also can fit for small length NEMA34 two and four phase stepper motors.

3. Stepper Motor
Technical Specifications
Part No.: 23HS2430
Frame Size: NEMA23
Step Angle: 1.8 degree
Current: 3.0A/phase
Resistance: 1.6 Ohm/phase
Inductance: 6.8 mH/phase
Holding torque: 280N. Cm/18kg-cm 425 oz-in
Rotor inertia: 800g-cm2
Number of wire leads: 4
Weight: 1.66 kg
Length: 112mm
Shaft: Single shaft, 8mm diameter, 21mm length with double 10mm flat length
Note: If you need double shaft pls contact us, we can produce.
RED: A+
GREEN: A-
YELLOW: B+
BLUE: B-

4. Switching power supply
400W, Input: 100-120VAC or 200-240VAC, 50/60Hz, Output: 48V/8.3A, single output switching power supply.