Integrated Light Face Trapezoid with Diffusion Cover 7 W LED Flat Light

Trapezoidal integration light face 7 w with diffusion cover LED flat light

COB crossmodulation characteristic:
1. High heat dissipation: COB(ChipOnBoard)Patent technology, low thermal resistance, high heatconductivity, using the low power chip packaging directly to the aluminumsubstrate fast heat dissipation, small chip area, high cooling efficiency, drive current is small. Under constant temperature condition to keep around 70° Plate temperature, heat dissipation aluminum plate around 60 ° .
2. No glare eyeprotection: Professional design, no ghosting (deity), no glare, the lightdistribution of uniform soft, closer to the traditional lamps and lanterns.
3. Long life: Electric separation, satisfy the life 35000 hours, productwarranty 2 years.
4. High color rendering High CRI: Color rendering (CRI)reaches above 72.
5. Large flux: Light Angle120 ° Of lamps and lanterns and light source per watt 90 lm, or don't need thesecondary optical design.
6. More selective: 3000 k to4000 k, 5000 k, 6000 k fog surface and the surface of the transparent to choosefrom.
7. High guarantee: Using flat lampdedicated power supply to ensure the life of the product and efficiency (flatlamp dedicated power supply, power factor > 95%, the efficiency of > 85, minimal error rate)
Generallyspeaking, the LED lighting need to install the spread sheet, on the one hand, to restrain glare, make the light more evenly on the other hand, but it willcause loss to smooth effect. We use the COB light face broke through thetraditional focus on the LED is not suitable for indoor lighting, let us canalso no obstacles into indoor lighting lamps and lanterns of areas.
ProductParameter:
Product standard
Producing area:
Shenzhen
Model:
HZT-1523
Measurement:
168mm*37mm
Working voltage:
AC 85-265V
LED light source:
COBarea source
Rate of work:
7W
Luminous flux:
620-680(LM)
Color Temperature:
2500K-9000K
Power-supply efficiency:
≥ 85%
Power factor:
PF≥ 0.95
CRI(color rendering index):
≥ 70
Irritation angle:
≥ 120degree
Useful life:
50000hour
Material of case:
Aluminum alloy + aluminum plate
Environment temperature:
-20~~+40 centigrade
Environment humidity:
≤ 50%
Lamp holder interface:
OptionalG23/G24/E26/E27/B22
Power types:
Built-in power supply
The lamps and lanterns of lamp holder can rotate 280 degrees, can adjust the Angle of irradiation. Eliminate the shortage of traditional lighting effect to waste. Direct without reflective, but to give up reliance on traditional reflectors quality stand or fall.
Flat lampUSES:
Mall, supermarket, bar, hotel decoration, household lighting, lamps light source, engineering lighting, parking lot, western restaurant, coffee shop, club, shopWindows, exhibition hall, art hall, museum and other home lighting business.
Mattersneed attention:
1. Cut off the powerbefore installation to prevent electric shock!
2. The lamp should avoidinstalled in the heat source and thermal steam, corrosive gas, lest affect lifespan.
3. Before installation toensure that the installation position can take 10 times the weight of theproduct. In no vibration, no swing, no fire hazard level ground.
4. Lamps andlanterns of the control system is designed by engineers working in the lampsand lanterns labeled under the condition of use, Or usetypical color change effect work, Can achieve the optimization of the LED life. Beyond the markscope of work for a long time, Can make the LED into the life of a lower. In extreme cases, theinternal light source component failure will happen.