Professional Loudspeaker Line Array (Flex TP-850)

The Flex TP-850 is a two-way line array element housing two 10"/3" VC LF neodymium cone drivers and a dendritic device on a 1.4" exit neodymium compression driver along with a passive crossover network, switchable passive or bia-mped. The 90-degree constant directivity horizontal dispersion pattern is maintained down to 350Hz, while the vertical HF dispersion of 15° Allows the Flex TP-850's to be scalable when needed. The mechanical design of the cabinet enables vertical splay angles to be set at 0° , 4° , 7.5° , 12° And 15° , and two NL4 connectors wired in parallel are mounted on the real panel. The frequency pattern control of a flown hang of 6 Flex TP-850's can go down to 70Hz. The cabinet is equipped with multiple handles and constructed by 18-layer plywood and coated with water based painting for environmental purpose.

FEATURES
Ideal system for mid-sized applications, or as downfill in larger venues
Innovative Neodymium Drivers Supported
Extremely high power-to-size ratio
Optimized line array behavior provides consistent response over long throws
Available in passive or biamped water-based paint for environmental purpose

APPLICATIONS
Touring sound
Outdoor concerts, festivals and such medium-scale events

TECHNICAL SPECIFICATIONS
Type Compact two-way line array element, switchable passive/bi-amp
Frequency Response 60Hz-20KHz± 3dB, -10dB@ 55Hz
Drivers Two 10"/3" VC NEO cone driver; One 1.4" exit NEO compression driver
Rated Power 850 W(LF: 700 W/ HF: 150 W)
Recommended Amplifier 850-1700W into 4 ohms
Sensitivity@1m/1w 102 dB
Maximum SPL 132 dB continuous, 138dB peak
Nominal Impedance 8 ohms nominal
Dispersion(-6dB) 90° Horizontal, 15° Vertical
Crossover 1.8KHzPassive
Finish Textured black paint
Protective Grille Black perforated steel
Connectors 2× Neutrik speakon NL4
Fittings Top hat fitting
Dimensions (W)850mm? H)300mm? D)415mm
Weight 35 kg