Magnabend Pneumatic Magnetic Sheet Metal Brake

This magnetic sheet metal brake Magnabend sheet metal folding machine Recommended for:
HVAC shops, industrial art shops, and general sheet metal fabrication shops.
Making ductwork, triangles, alternate bends on varying planes, round items such as scrolling applications, and much more.     


1. How to get a accurate Magnetic sheet metal bending machine quotation from us?
provide us the detail of the material such as metal thickness and width, cutting area and will advice best Magnetic sheet metal bending machine for you.
2. what's the shipping cost from China to your country?
We can send the Magnetic sheet metal bending machine to your port or door address by sea or airplane.
Please kindly tell us your nearest port or address with postcode.
We have reliable shipping agent to insure the safe, convenient and timely delivery.
3. How to check imported charges or tax ?
Call your Customer tell them machine HS code.
Press brake are 84622990. 
4. Payment terms, MOQ, warranty, FOB...
payment terms 30% down payment with order by T/T ,the balance of 70% to be paid before delivery .minimum order quantity:1 set Magnetic sheet metal bending machine, FOB Fuzhou China
5. delivery time : 7 days after receipt of formal order and 30% deposit
6. warranty: 12 months following delivery. 
7. what's the package?
free plywood case
8. How to operate this machine ?
  we send you the movie directly
9. what about commissioning service ?
 we can offer commissioning service, the buyer need to afford plane tickets
10. Do you offer teaching & training ?
Training at supplier's plant
11. what's policy for guarantee and broken parts?
Warranty period of Magnetic sheet metal bending machine equipment lasts a year, during which the broken parts and spares caused by quality can be offered free.


JDC™ frequently asked questions

Q: How do you use the machine?
A: You put your sheet metal work piece in under the clamp bar, switch on clamping, then pull the main handle (s) to bend the workpiece
Q: How is the clampbar attached?
A: In use, it is held down by a very powerful electromagnet. It is not permanently attached, but it is located in its correct position by a spring-loaded ball at each end.

This arrangement lets you to form closed sheetmetal shapes, and also to swap to other clampbars quickly.
Q: What is the maximum thickness sheet it will bend?
A: It will bend 1.6 mm mild steel sheet in the full length of the machine.  It can bend thicker in shorter lengths.
Q: What about aluminium and stainless steel?
A: Yes, the JDC will bend them.  The magnetism passes through them and pulls down the clampbar onto the sheet.
It will bend 1.6 mm aluminium in full length, and 1.0 mm stainless steel in full length.
Q: How do you make it clamp?
A: You press and temporarily hold the green "Start" button.  This causes light magnetic clamping.  When you pull the main handle it automatically switches to full power clamping.
Q: How does it actually bend?
A: You form the bend manually by pulling the main handle (s).  This bends the sheetmetal around the front edge of the clampbar which is held in place magnetically.  The convenient angle scale on the handle tells you the angle of the bending beam at all times.
Q: How do you release the workpiece?
A: As you return the main handle  the magnet automatically switches off, and the clampbar pops up on its spring-loaded locating balls,  releasing the workpiece.
Q: Won't there be residual magnetism left in the workpiece?
A: Every time the machine switches off, a short reverse pulse of current is sent through the electromagnet to de-magnetise both it and the workpiece.
Q: How do you adjust for metal thickness?
A: By altering the adjusters at each end of the main clampbar.  This alters the bending clearance between the front of the clampbar and the working surface of the bending beam when the beam is up at the 90° position.
Q: How do you form a rolled edge?
A: By using the JDC to wrap the sheetmetal progressively around a length of ordinary steel pipe or round bar.  Because the machine works magnetically it can clamp these items.
Q: Does it have pan-brake clamping fingers?
A: It has a set of short clampbar segments which can be plugged together for forming boxes.
Q: What locates the short segments?
A: The plugged together segments of clampbar must be located manually on the workpiece.  But unlike other pan brakes,  the sides of your boxes can be of unlimited height.
Q: What's the slotted clampbar for?
A: It is for forming shallow trays and boxes less than 40 mm deep.  It is available as an optional extra and is quicker to use than the standard short segments.
Q: What lengths of tray can the slotted clampbar fold?
A: It can form any length of tray within the length of the clampbar.  Each pair of slots provides for a variation of sizes over a 10 mm range, and the positions of the slots have been carefully worked out to provide all possible sizes.
Q: How strong is the magnet?
A: The electromagnet can clamp with 1 tonne of force for every 200 mm of length.  For instance, the 1250E clamps up to 6 tonnes over its full length.
Q: Will the magnetism wear out?
A: No, unlike permanent magnets, the electromagnet cannot age or weaken due to use.  It is made of plain high-carbon steel that depends solely on an electric current in a coil for its magnetisation.
Q: What mains supply is needed?
A: 220 volts ac.  The smaller models (up to the Model 1250E) run from an ordinary 10 Amp outlet.  Models 2000E and up need a 15 Amp outlet.
Q: What accessories come as standard with the JDC?
A: The stand, backstops, full-length clampbar, a set of short clampbars, and a manual are all

JDC ™ sheet-metal folding machines compared with conventional box and pan folders
a. Much greater versatility than conventional sheetmetal benders.
b. No limitation to depth of boxes.
c. Can form deep channels, and completely closed sections.
d.Automatic clamping and unclamping means faster operation, less fatigue.
e Accurate and continuous indication of beam angle.
f Quick and accurate setting of angle stop.
g Unlimited throat depth.
h Infinite length bending in stages is possible.
i Open ended design allows folding of complex shapes.
j Machines can be ganged end-to-end for long bending.
k Adapts easily to customised tooling (clamp bars of special cross-sections).
l Self-protecting - machine cannot be overloaded.
m Neat, compact and modern design.

This magnetic sheet metal brake Magnabend sheet metal folding machine Recommended for:
HVAC shops, industrial art shops, and general sheet metal fabrication shops.
Making ductwork, triangles, alternate bends on varying planes, round items such as scrolling applications, and much more.