Lead-Acid Battery (12V-100AH)

Model: 12V100AH solar battery, UPS battery, lead acid battery
Lead acid battery Size: 331*173*223mm
Approx weight: 30.5KG
Packing detail: Carton and pallet 1PCS/CTN,
Brand: Lantian

Unique prescription of corrosion-resisting grid alloy and active material, advanced production technology, distinctive design, special gas recombination and compact construction, all of these together with strict technical and quality control make our battery possess the following features:
1 Long service life.
2 Low self-discharge.
3 Sufficient capacity.
4 Wide operating temperature range.
5 Good sealing capability.
6 Good electric conductivity.
7 Good charge acceptance performance.
8 Safe and reliable venting system.

12V200ah Solar UPS Lead-Acid Battery Application
- Solar, wind powered sytems
-UPS
-Telecommunication system
-Portable instruments
- Power station system
- Emergency lighting system

Our Advantage:
1. We possess our own lead grid production technology and production line, which effective help you with quality and cost control.
2. As a 17 years history factory, and fast delivery.
3. As with SGS, UL, CE, ISO9001, ISO14001 company, we believe that our battery quality can definitely satisfy you.

Precautions
1. According to the requirement of application ans design to choose battery model, characteristics and mounting method.
2. Avoid mixing use of the batteries with different capacity, manufacturers, characteristics and models.
3. It is recommended to charge the battery using the method of constant voltage-limited current. Under the ambient temperature 25° C: For standby use charging voltage is 2.23-2.30V/cell, and no limit on the maximum current; For cycle use, the charging voltage is 2.40-2.50V/cell, average charging voltage: 2.35-2.40V/cell. The maximum current is 0.3C10A( C10 is the rated capacity of discharging at 10 hour rate).
4. During operating, the battery charging voltage according to the ambient temperature. The temperature compensation coefficient is -3mV/° C cell for standby use, i. e. The temperature increases 1° C, the charging voltage decreases 3mV/cell. On the contrary, the temperature compensation coefficent is 1° C, the charging voltage increases 3mV/cell. The temperature compensation coefficient is -5mV/° C cell for cycle us; Average charging time: -4mV/° C cell.
5. Do not charge the battery in a sealed container or in upside down position. It is recommended to charge the battery in a well ventilated place.
6. Do not charge the battery near a heater, or place where heat accumulation may accur. Do not charge the battery in a place where there is derect sunshine.
7. Never have the batteries deposited with organic solvents to prevent the container from being out of shape or corrosion.
8. Battery should never be stored in discharge state for a long period of time, please rehcarge the battery after discharge to keep the capacity. During operating, do not discharge to avoid the plaes severe sulphation which affrcts the service life ad capacity.
9. Do not over charge the battery, as the safety vent opens constantly, which will cause the loss of water, finally shorten the service llife of battery.
10. '+" stand for positive, and "-" for negative, Pleases connect the pole of batteries correctly.
11. Keep the whole battery clean and connection strong. Aviold the damage due to the loose connection.
12. Do not disassemble or throw the battery into fire, against explosion.