Hfct Sensor / Transducer

US$1.00 1 Piece (MOQ)
Payment Terms:
L/C, T/T, Western Union

Last Login Date:

Oct 28, 2015

Main Products:

Pupillometer, Conductivity Sensor, Turbidity Sensor, Hfct Sensor, High Frequency Current Transducer, Residual Chlorine Sensor

Find Similar Products

Product Description

Company Info

Product Description

Excellent Instantaneous Response Ability
Easy Calibration and High Accuracy
Easy for Installation
High Protection Level
 
 Main Features 
Ø The transducer has excellent instantaneous response ability, which can be widely used in high frequency current measurement that the traditional 
current measurement device can't be applied in. 
 
Ø The transducer can be directly worn on the measured conductor to measure 
the high frequency partial discharge current. It has good linearity, easy 
calibration and high accuracy, and can measure irregular conductor. 
Convenient installation does not need to destroy the conductor without risk of secondary circuit opening. 
 
Ø Clamp-on transducer structure design is easy for installation. 
 
Ø Transducers with different diameter and structure can be customized. 
 
Ø Epoxy resin casting embedding makes the level of protection reach IP66 
(IP68 transducer customizable), which allows all weather outdoor use. 
 
 
 
Product Introduction 
GZ-SEN series high frequency current transducer ( also called RF current 
transformer or HFCT ) is a non-invasive type transducer specially designed 
for measuring partial discharge signal by Public Intelligent, and it is 
applicable to the site condition with the voltage class of 6.3 kv and above.It is classified as many models according to different inside diameters, 
such as 30 mm, 60 mm, 100 mm and so on. The transducer adopts feed-through 
clamp-on structure design, to enable it convenient and safe.

Technical Indicators
Principle of the transducer Rogowski Coil. 
Structure Circular clamp-on structure is fixed and 
installed through the clip or screw. 
Inside diameter of the transducer GZ-SEN-030 type 30 mm 
GZ-SEN-060 type 60 mm 
GZ-SEN-100 type 100 mm 
It can be customized 
Transducer weight ≤ 1.2 Kg. 
The case Nonmagnetic metal case. 
The internal structure Epoxy resin casting embedding. 
Level of protection IP67. 
Signal output interface of the transducer  TNC head (Aviation plug or BNC connector can be customized)
Working frequency band 2 MHZ - 30 MHZ. 
Matching impedance 50 Ohm. 
Sensitivity 1 mA. 
Power frequency tolerance current It has strong ability of isolation to the low frequency signal below 1 kHz, 
especially power frequency signal of 50 HzTransducer can work in the condition of 
power frequency current of not more than 
800A (There may be a slight vibration whenexceeding 500 A). It can be installed on 
the cable. 
Working temperature - 40 ºC ~ + 65 ºC. 
Relative humidity 5% ~ 98% RH. 

Frequency Response Curve: 
This curve is measured when the transducer output is connected to 50 ohm load. 
And the response ratio (mv/ma) is 3 times of which of 50 ohm load if the 
transducer output is connected to 1 K ohm load.
 
GZ-GEN series high frequency pulse current transducer can be widely used in
partial dischargedetection of high voltage electrical equipment such as all 
of various voltage classes of transformers, cables, switch cabinets, GIS, 
generators, PT cabinets and circuit breakers. It can be installed in earth 
wire of cable input casing/surge capacitor, or the secondary winding of 
current transformer of switch device, or neutral line of generator and 
transformer, or the cable or earth wire of the shielding layer. 
 
Address: No. 4955 Shangyuan Road, Xi′an Economic & Technological Development Zone, Xi′an, Shaanxi, China
Business Type: Manufacturer/Factory, Trading Company, Other, Group Corporation
Business Range: Electrical & Electronics, Health & Medicine, Instruments & Meters
Management System Certification: ISO 9001
Company Introduction: Shaanxi public Intelligent Technology Co., Ltd. Is one high-tech enterprise located in Xi′an Hi-tech Industry Development Zone. Which has the rich experience in Internet of Things research and development, production and sale. The company focus on the independent innovation, and can provide a series of products and whole solutions with independent intellectual property right on patient pupul measurement, Partial Discharge online monitoring and Drinking Water Quality online monitoring.

The related products, such as: Pupillometer, HFCT Sensor, Turbidity Sensor, Residual Chlorine Sensor, Conductivity Sensor are with high quality and welcomed by the clients all over the world.

The company obtained more than 30 invention and utility model patents, more than 10 computer software copyright and 3 software product register. Adhering to the principle of "keep improving and self-exceeding, pursue excellence", relying on the excellent products and strong entrepreneur spirit, the company attaches importance to developing standardized and specialized construction and intensifies our efforts to foster a high quality brand image in the counterparts.
Send your message to this supplier

Post a Sourcing Request Now