Basic Info.
Working Pressure
High Pressure Pump
Influent Type of Impeller
Pump Casing Combined
Horizontal Split Pumps
Material
Cast Iron, Cast Steel, Cast Copper
Trademark
Shenyang No. 1 Pump
Transport Package
Standard Export Package
Specification
common baseplate with motor
Product Description
Overview:
The RW series heat pump is a new product developed for the thermal network system of thermal power plants. It has good anti-cavitation performance, high temperature resistance, stable and reliable operation, long service life, etc. It is ideal for the thermal network system of thermal power generating units. , It can also be used in petrochemical industry, environmental protection projects.
Performance range:
1. The maximum temperature of the conveying medium is 120°C.
2. Traffic: Q=234~2016m3/h
Head: H=65~136m
Seen from the drive end, the pump rotates counterclockwise.
Structural features:
1.The RW heat pump is a horizontal, single-stage, double-suction, horizontal mid-open pump. The suction and discharge pipes are cast together with the lower half of the pump body. The rotor components of the pump can be inspected without having to disassemble the pipes and motors.
2.Shaft seal structure:
a.Flexible graphite composite material for soft packing sealing, heat-resistant temperature up to 400 °C.
b.Mechanical seal friction wear with wear-resistant alloy, and can be reused.
c.The self-rinsing system with air cooling and throttling device effectively guarantees flushing and cooling of the seal.
3.The two ends of the shaft are supported by rolling bearings, and the non-drive ends are two single row radial ball bearings, which can balance the unbalanced axial force caused by non-design point operation or casting deviation. The bearing body has a water-cooled cavity, the surface is cast with heat sinks, water-cooled and naturally cooled, and the oil-immersed, thin oil lubrication ensures that the bearings run reliably and smoothly.
4.The pump body is made of cast iron and cast steel. Stainless steel is used for the impeller and the ring to improve the anti-cavitation performance of the pump.
5.In order to facilitate the update of the old equipment, its performance parameter range, installation size and sh-type remain the same.
From the driving direction, the pump rotates counter-clockwise, and the pump's manufacturing conforms to the AP1610 standard.
Model Description:
Overview:
The RW series heat pump is a new product developed for the thermal network system of thermal power plants. It has good anti-cavitation performance, high temperature resistance, stable and reliable operation, long service life, etc. It is ideal for the thermal network system of thermal power generating units. , It can also be used in petrochemical industry, environmental protection projects.
Performance range:
1. The maximum temperature of the conveying medium is 120°C.
2. Traffic: Q=234~2016m3/h
Head: H=65~136m
Seen from the drive end, the pump rotates counterclockwise.
Structural features:
1.The RW heat pump is a horizontal, single-stage, double-suction, horizontal mid-open pump. The suction and discharge pipes are cast together with the lower half of the pump body. The rotor components of the pump can be inspected without having to disassemble the pipes and motors.
2.Shaft seal structure:
a.Flexible graphite composite material for soft packing sealing, heat-resistant temperature up to 400 °C.
b.Mechanical seal friction wear with wear-resistant alloy, and can be reused.
c.The self-rinsing system with air cooling and throttling device effectively guarantees flushing and cooling of the seal.
3.The two ends of the shaft are supported by rolling bearings, and the non-drive ends are two single row radial ball bearings, which can balance the unbalanced axial force caused by non-design point operation or casting deviation. The bearing body has a water-cooled cavity, the surface is cast with heat sinks, water-cooled and naturally cooled, and the oil-immersed, thin oil lubrication ensures that the bearings run reliably and smoothly.
4.The pump body is made of cast iron and cast steel. Stainless steel is used for the impeller and the ring to improve the anti-cavitation performance of the pump.
5.In order to facilitate the update of the old equipment, its performance parameter range, installation size and sh-type remain the same.
From the driving direction, the pump rotates counter-clockwise, and the pump's manufacturing conforms to the AP1610 standard.
Model Description:
Overview:
The RW series heat pump is a new product developed for the thermal network system of thermal power plants. It has good anti-cavitation performance, high temperature resistance, stable and reliable operation, long service life, etc. It is ideal for the thermal network system of thermal power generating units. , It can also be used in petrochemical industry, environmental protection projects.
Performance range:
1. The maximum temperature of the conveying medium is 120°C.
2. Traffic: Q=234~2016m3/h
Head: H=65~136m
Seen from the drive end, the pump rotates counterclockwise.
Structural features:
1.The RW heat pump is a horizontal, single-stage, double-suction, horizontal mid-open pump. The suction and discharge pipes are cast together with the lower half of the pump body. The rotor components of the pump can be inspected without having to disassemble the pipes and motors.
2.Shaft seal structure:
a.Flexible graphite composite material for soft packing sealing, heat-resistant temperature up to 400 °C.
b.Mechanical seal friction wear with wear-resistant alloy, and can be reused.
c.The self-rinsing system with air cooling and throttling device effectively guarantees flushing and cooling of the seal.
3.The two ends of the shaft are supported by rolling bearings, and the non-drive ends are two single row radial ball bearings, which can balance the unbalanced axial force caused by non-design point operation or casting deviation. The bearing body has a water-cooled cavity, the surface is cast with heat sinks, water-cooled and naturally cooled, and the oil-immersed, thin oil lubrication ensures that the bearings run reliably and smoothly.
4.The pump body is made of cast iron and cast steel. Stainless steel is used for the impeller and the ring to improve the anti-cavitation performance of the pump.
5.In order to facilitate the update of the old equipment, its performance parameter range, installation size and sh-type remain the same.
From the driving direction, the pump rotates counter-clockwise, and the pump's manufacturing conforms to the AP1610 standard.
Model Description:
Overview:
The RW series heat pump is a new product developed for the thermal network system of thermal power plants. It has good anti-cavitation performance, high temperature resistance, stable and reliable operation, long service life, etc. It is ideal for the thermal network system of thermal power generating units. , It can also be used in petrochemical industry, environmental protection projects.
Performance range:
1. The maximum temperature of the conveying medium is 120°C.
2. Traffic: Q=234~2016m3/h
Head: H=65~136m
Seen from the drive end, the pump rotates counterclockwise.
Structural features:
1.The RW heat pump is a horizontal, single-stage, double-suction, horizontal mid-open pump. The suction and discharge pipes are cast together with the lower half of the pump body. The rotor components of the pump can be inspected without having to disassemble the pipes and motors.
2.Shaft seal structure:
a.Flexible graphite composite material for soft packing sealing, heat-resistant temperature up to 400 °C.
b.Mechanical seal friction wear with wear-resistant alloy, and can be reused.
c.The self-rinsing system with air cooling and throttling device effectively guarantees flushing and cooling of the seal.
3.The two ends of the shaft are supported by rolling bearings, and the non-drive ends are two single row radial ball bearings, which can balance the unbalanced axial force caused by non-design point operation or casting deviation. The bearing body has a water-cooled cavity, the surface is cast with heat sinks, water-cooled and naturally cooled, and the oil-immersed, thin oil lubrication ensures that the bearings run reliably and smoothly.
4.The pump body is made of cast iron and cast steel. Stainless steel is used for the impeller and the ring to improve the anti-cavitation performance of the pump.
5.In order to facilitate the update of the old equipment, its performance parameter range, installation size and sh-type remain the same.
From the driving direction, the pump rotates counter-clockwise, and the pump's manufacturing conforms to the AP1610 standard.
Model Description:
Overview:
The RW series heat pump is a new product developed for the thermal network system of thermal power plants. It has good anti-cavitation performance, high temperature resistance, stable and reliable operation, long service life, etc. It is ideal for the thermal network system of thermal power generating units. , It can also be used in petrochemical industry, environmental protection projects.
Performance range:
1. The maximum temperature of the conveying medium is 120°C.
2. Traffic: Q=234~2016m3/h
Head: H=65~136m
Seen from the drive end, the pump rotates counterclockwise.
Structural features:
1.The RW heat pump is a horizontal, single-stage, double-suction, horizontal mid-open pump. The suction and discharge pipes are cast together with the lower half of the pump body. The rotor components of the pump can be inspected without having to disassemble the pipes and motors.
2.Shaft seal structure:
a.Flexible graphite composite material for soft packing sealing, heat-resistant temperature up to 400 °C.
b.Mechanical seal friction wear with wear-resistant alloy, and can be reused.
c.The self-rinsing system with air cooling and throttling device effectively guarantees flushing and cooling of the seal.
3.The two ends of the shaft are supported by rolling bearings, and the non-drive ends are two single row radial ball bearings, which can balance the unbalanced axial force caused by non-design point operation or casting deviation. The bearing body has a water-cooled cavity, the surface is cast with heat sinks, water-cooled and naturally cooled, and the oil-immersed, thin oil lubrication ensures that the bearings run reliably and smoothly.
4.The pump body is made of cast iron and cast steel. Stainless steel is used for the impeller and the ring to improve the anti-cavitation performance of the pump.
5.In order to facilitate the update of the old equipment, its performance parameter range, installation size and sh-type remain the same.
From the driving direction, the pump rotates counter-clockwise, and the pump's manufacturing conforms to the AP1610 standard.
Model Description:
Overview:
The RW series heat pump is a new product developed for the thermal network system of thermal power plants. It has good anti-cavitation performance, high temperature resistance, stable and reliable operation, long service life, etc. It is ideal for the thermal network system of thermal power generating units. , It can also be used in petrochemical industry, environmental protection projects.
Performance range:
1. The maximum temperature of the conveying medium is 120°C.
2. Traffic: Q=234~2016m3/h
Head: H=65~136m
Seen from the drive end, the pump rotates counterclockwise.
Structural features:
1.The RW heat pump is a horizontal, single-stage, double-suction, horizontal mid-open pump. The suction and discharge pipes are cast together with the lower half of the pump body. The rotor components of the pump can be inspected without having to disassemble the pipes and motors.
2.Shaft seal structure:
a.Flexible graphite composite material for soft packing sealing, heat-resistant temperature up to 400 °C.
b.Mechanical seal friction wear with wear-resistant alloy, and can be reused.
c.The self-rinsing system with air cooling and throttling device effectively guarantees flushing and cooling of the seal.
3.The two ends of the shaft are supported by rolling bearings, and the non-drive ends are two single row radial ball bearings, which can balance the unbalanced axial force caused by non-design point operation or casting deviation. The bearing body has a water-cooled cavity, the surface is cast with heat sinks, water-cooled and naturally cooled, and the oil-immersed, thin oil lubrication ensures that the bearings run reliably and smoothly.
4.The pump body is made of cast iron and cast steel. Stainless steel is used for the impeller and the ring to improve the anti-cavitation performance of the pump.
5.In order to facilitate the update of the old equipment, its performance parameter range, installation size and sh-type remain the same.
From the driving direction, the pump rotates counter-clockwise, and the pump's manufacturing conforms to the AP1610 standard.
If you have interest or need, please contact me!
Lydia Han
Mob. 86-13674286095
Address:
No. 17, Road 23, Shenyang Eco-Tech Development Zone, Shenyang, Liaoning, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9000
Company Introduction:
Shenyang No. 1 Pump Co., Ltd (original Shenyang No. 1 Pump Manufactory China), hereafter referred as "SYFP", is one of the key enterprises specializing in manufacturing pump products.
SYFP has acquired State Production License for Industrial Products and Safety Mark Certificate for Mining Products, and ranked as "AAA Credit" Enterprise. At the same time we have achieved the ISO9001: 2000 Quality Management System Certification. Our products is well known and sold to Latin America, South East Asian, and other countries and areas.
Firstly established in 1962, SYFP situates on an area of 32, 000 m2, out of which, a building area of 17, 000 m2. SYFP owns over 180 sets of machinery and equipment in various types as well as 1, 000 m3 of water basin volume in testing pump station and A Grade-III Measurement Testing Room.
SYFP is specialized in the manufacturing of industrial pumps, and has attracted a group of professional engineers and technicians. With talented technical forces, well-equipped facilities and equipment, and advanced processing technique to safeguard the manufacturing and development capacity for products, over the past years, SYFP has actively served multi-industries including petroleum, chemical, power station, mining, metallurgy, papermaking, sugar making, food, environmental protection, military, and others.
International standard and national GB standard has been adopted by our all products. Solid foundation has been laid by utilizing microcomputer quality control system for the factory′s development towards internationalization and standardization, and production of high-efficiency and energy-saving products.
