[PRODUCT DESCRIPTION]
All TM80A drum motors have the following characters:
1. Drum motor shell
Mild steel crowned shell treated with anti-rust oil.
Food grade drum motor shell can be supplied in stainless steel-304.
2. Gear transmission
Gears machined and honed to agma/din 6 standards to ensure low noise.
Die cast aluminium gearbox.
3. Motor
Common global voltages at 50Hz or 60Hz.
Motor windings insulation class F.
All motors with thermal protection.
Oil cooled electrical motor.
Cable length standard 1.2 meters outside shaft.
4. Sealing system
Double shaft sealing system.
Sealing system-degree of protection IP 66/67.
5. Oil
Pre-lubricated with oil.
Oil change recommended every 50, 000 hours of operation.
6. Other items
To be used in the horizontal position only.
Belt speed and face width (L) on requests.
Non-standard drum motors are available on requests.
Conformity with CE and UL safety certificate.
[TECHNICAL DATA]
Amroll drum motor TM80A -- 1*230V/50Hz
Power
(kw/hp) | No. of poles | Gear stages | Gear ratio | Nominal belt speed (m/s) | Full load torque (Nm) | Full load belt pull (N) | Full load current (A) | Min. Face width (L) (mm) | Min. Length weight (kg) |
0.034/
0.045 | 4 | 3 | 74.79
55.11
37.89 | 0.08
0.10
0.15 | 16.41
13.11
8.73 | 400
320
214 | 0.48 | 400 | 6 |
| 2 | 28.95
21.33
14.67
11.81 | 0.20
0.27
0.40
0.50 | 6.55
4.85
3.28
2.62 | 160
118
80
64 |
0.060/
0.080 | 2 | 3 | 74.79
55.11
37.89 | 0.15
0.20
0.30 | 15.42
11.01
7.71 | 391
269
188 | 0.57 | 400 | 5 |
| 2 | 28.95
21.33
14.67
11.81 | 0.39
0.52
0.76
0.95 | 5.91
4.37
2.95
2.36 | 142
104
71
56 |
0.085/
0.115 | 2 | 3 | 74.79
55.11
37.89 | 0.16
0.22
0.32 | 19.28
13.77
9.63 | 489
336
236 | 0.66 | 400 | 6 |
| 2 | 28.95
21.33
14.67
11.81 | 0.41
0.56
0.81
1.01 | 7.38
5.46
3.69
2.96 | 177
131
89
71 |
0.11/
0.15 | 2 | 3 | 55.11
37.89 | 0.22
0.32 | 22.02
15.42 | 538
376 | 0.99 | 400 | 6 |
| 2 | 28.95
21.33
14.67
11.81 | 0.42
0.56
0.82
1.02 | 11.82
8.74
5.90
4.72 | 284
208
142
112 |
At the min. Face width (L), the total weight of a drum motor grows approx. 1.2kgs per 100mm.
Amroll drum motor TM80A -- 3*400V/50Hz
Power
(kw/hp) | No. of poles | Gear stages | Gear ratio | Nominal belt speed (m/s) | Full load torque (nm) | Full load belt pull (N) | Full load current (A) | Min. Face width (L) (mm) | Full load torque (nm) |
0.04/
0.05 | 4 | 3 | 74.79
55.11
37.89 | 0.08
0.10
0.15 | 18.00
14.40
9.60 | 450
360
240 | 0.43 | 400 | 6 |
0.06/
0.08 | 2 | 3 | 74.79
55.11
37.89 | 0.15
0.20
0.30 | 19.28
13.77
9.63 | 489
336
236 | 0.30 | 400 | 5 |
| 2 | 28.95
21.33
14.67
11.81 | 0.39
0.52
0.76
0.95 | 7.38
5.46
3.69
2.96 | 177
131
89
71 |
| 4 | 3 | 55.11
37.89 | 0.10
0.15 | 28.91
19.27 | 705
470 | 0.36 | 400 | 6 |
0.09/
0.12 | 2 | 3 | 74.79
55.11
37.89 | 0.16
0.22
0.32 | 23.13
16.52
11.56 | 587
403
283 | 0.43 | 400 | 6 |
| 2 | 28.95
21.33
14.67
11.81 | 0.41
0.56
0.82
1.01 | 8.86
6.55
4.43
3.55 | 212
157
106
85 |
0.12/
0.16 | 2 | 3 | 55.11
37.89 | 0.22
0.32 | 22.02
15.42 | 538
376 | 0.53 | 400 | 6 |
| 2 | 28.95
21.33
14.67
11.81 | 0.42
0.56
0.82
1.02 | 11.82
8.74
5.90
4.72 | 284
208
142
112 |
At the min. face width (L), the total weight of a drum motor grows approx.1.2 kgs per 100 mm.
[APPLICATIONS]
TM80A drum motor is mainly designed for limited space applications. It is perfect for high efficiency and reliable quality. This kind of drum motor is typically used in:
Min. X-ray machines
Package machines
Dynamic weighing equipment
Pharmaceutical handling
Food processing
Belt conveyors
· [ENVIRONMENTAL CONSIDERATION]
• Low /high ambient temperature: 5oC to 40oC Below +5oC or above 40oC, special oil.
• Extremely dusty/abrasive wet/high humidity:
IP66/67 sealing, special finish, i.e. stainless steel, electro-galvanizing, nickel plating, rubber lagging.
• Under water applications:
Where specified IP66/67, the drum motor has been tested for 30 minutes under 1 meter of water. However, the motor is not intended for continuous under water performance.
• Reversible conveyor.
Time delay between forward and reverse: The motor must come to a complete stop before reversing. Drum motor installed in the middle of the conveyor is recommended.
• Extremely low noise/vibration environments, consult Seaparks Company.
• High altitudes>1000m, consult Seaparks Company.
• Amroll drum motors are not intrinsically safe or explosion proof.
• Exact speed requirements
For encoder solution and frequency converter, where exact speeds are required, please consult Seaparks Company. The given nominal motor speed can deviate by 10%. Belt speed as specified in the Amroll catalogue and on the motor label is the calculated speed at rated diameter and full load.
[SEAPARKS COMPANY]
We built a strong team of professional who dedicated to research&development, sales, production and shipping.
1.Pre-sales service
If the seller or user needs to ensure whether the product is adapt to the particular conditions.
Guidance is available from our customer service department, We welcome any specific questions via fax, phone or e-mail anytime.
2.Production
1.)Confirm the details of products(such as diameter,power,voltage,belt speed and so on)with clients when the order confirmed by clients.
2.)Tracking the production process, real-time update production progress and make sure the fast delivery.
3.After-Sales Service
1.)If the product has any quality problem, you can contact us,we will give you a satisfactory answer and try our best to solve your problem.
2.)Update the products information and newest price to clients when we built business relationship.
[COMPANY INFORMATION]
Seaparks company has provided "AMROLL" drum motors to the material handling industry for many years. Since its first drum motor was assembled in 2002, seaparks has adhered to a key principle: top quality and low price.
Seaparks was established in 2002 and the factory is located in Tianjin of China covering 6,000 m2.At this site, Seaparks employs a team of experts and enthusiastic workers who make use of highly advanced machinery.
By making consistent investments in factory automation over the past years, the manual lathes, milling machines and other equipments gave space to high technology CNC equipments. This state of the art equipment is used to produce high precision parts for our "AMROLL" drum motors.
Any demand,pls contact us anytime.
Seaparks(Tianjin) Machinery-Electronics Co.,Ltd
Add: Xianghe Road, Science & Technology Park, Beichen District, Tianjin,China
Our website: http://www.made-in-china.com/showroom/seaparkssd/
Contact with Shirley
