Working temperature:-20-60ºC
Input voltage:DC12V~24V
Output current: 8A/ch
Output power: 12V:<384W, 24V:<768W
Controller size:L166xW65×H40mm
Packing box size:L176×W84×H50mm
Net weight:305g
Gross weight:385g
Output: 4 circuits
DMX512 standard:DMX512/1990
Accessories:DMX signal plugs 1 pair
Digital display description:
Adopt the 4 numbers digital tube, and with three buttons to setting the address code. Each Decoder occupy 3
address code. The first number on the digital tube is to show the Function symbol, it has A, H, or S letter
optional, and the last three numbers is to show the arabic date from 001-512.
1) When the fist letter shows "A", It's on the DMX512 State, means that this decoder is under the DMX512
Signal control state, at this time connect the decoder to the DMX console with network cable, it can be
controlled by the DMX console. If the digital tube shows "A001", it means that the first of the address
code is 001, and the other 3 channels are corresponding to 002,003, 004. If connected this decoder with the
other decoder, then the other decoder's first address code is 005, and the others 3 channels of it is
005,006,007. It can be connected with numbers of decoders, and can be controlled alone.
If two or several decoder's address codes are the same, means that these same address code decoder are
changing in the same effect, and they can be realize synchronous controlled effect.
2) When the fist letter shown "H", it will be in the built-in mode function, means that this decoder will be
working in the built-in program. the build-in models are as below:
Show symbols | Mode | Show symbols | Mode |
H-00 | Turn OFF output | H-05 | Static purple |
H-01 | Static red | H-06 | Static cyan |
H-02 | Static green | H-07 | Static white |
H-03 | Static blue | H-08 | Seven color jump(speed adjustable) |
H-04 | Static yellow | H-09 | Seven color fade(speed adjustable) |
3) When the first letter shown "S", it will be in the built-in speed setting state function, at this state just the H-08 and the H-09 are valid, press the SET button lightly to enter the speed adjustable state, then press the button +/- can be realize the 11 levels speed option. Others functions are no effective.
Key function specification:
There are three buttons (Button 1: SET, Button 2:- Button 3:+)on the decoder, the function of them are as below:
Button SET: Mode switch key, long press this key for about 2 seconds, can be switch from function A to function H (function H to function A), press SET Button lightly can be switch from function H to function S(function S to function H)
Button +: increase button, each time press the + key, the last three number of the digital tube will be increase one. If want to make the address code increase rapidly, just simply need to press this key last for some time.(Remarks :the max address code is 512,if it appear 512 and still press + key, it will be return back to 001):
Button - :decrease button, each time press the - key, the last three number of the digital tube will be decrease one. If want to make the address code decrease rapidly, just simply need to press this key last for some time.
Note: when the buttons without any operation after 5s, the decoder will into the self-locking working state, at this moment, the digital tube brightness dimming, press three buttons lightly is invalid. If need to awaken the buttons function, then long press (about 2s) any button to unlock.
Cautions:
1,This product only use on supply voltage DC12-24V, do not input on other voltage.
2,The lead wire shall be according to the wiring diagram of the color and label, connect correctly.
3,This product cannot be overloaded.
