Compression Mold Spring (TF, TL, TM)

Compression mold spring

1. ISO certificate
2. High quality and lower price
3. JIS standard
4. Imported material SUP-10

Why choose us
1. Delivery: 1 to 3 days. Because we have huge stocks.
2. Specialize in compression mold spring and gas spring, your inquiries will get highly attention and be prompt response. (within 24 hours)
3. ISO 9001: 2008 Certified, direct supplier, manufacture prices
4. Advanced facilities and experienced engineers, more than 10 years experience in compression mold spring
5. Guaranteed quality, superior material quality compared to all other
6. Customer oriented, efficient solution to control the cost for our client
7. One-stop service, any questions can be solved at the first time by us
8. Compression mold spring has been got 100% test and tryout before shipment
9. Compression mold spring Specification: 6X10mm ---70X500mm.
10. Free design all kind of non-standard compression die springs as you requested.

Style:
TR(Special light load) Silver color
TY(Minimal light load) Purple color
TF(Lighter load) Yellow color
TL(Light load) Blue color
TM(Medium load) Red color
TH(Heavy load) Green color
TB(Super heavy load) Coffee color

TF, TL with long stroke and small power; Used for plastic mould;
TM, TH, TB with short stroke and large power; Used for stamping mould;

Mould compression die Spring: Use of attention for compression spring

Choose right compression of die spring or will distortion and reduce service life.
Can't have gap between upper plate and die spring or will distortion and rupture.
When free length of die spring is 4 times to outer diameter, please use guide rod shield to protect service life.
Can't use it for anything except compression.
Please use it on the mould.
When the lower plate parallelism is not well, high stress will happen and cause transformation and rupture.
It must be have some preloading when put die spring on the mould. Preventing mould Bear impact load and cause fatigue damage.
Install and valid service condition
1. When die Spring install the hole of bottom without leader, the deep of hole must be more than two rings than die springs.
2. When mold spring install with leader, length of leader must be higher than length of spring
3. Close state (stroke limit) is reference dimension, Pls do not use if more than 300000 times or it will be bending and failure.
4. When installing, preloading is one over ten or more of the compression. When cope plate use with gap. Will cause die spring bending or scrap.