48*48 Rex C100 Pid Temperature Controller

Input
Thermocouple(TC), Resistance Temperature Detector(RTD), Standard Current and voltage signals.
DisplayProcess Value(PV), Setting Value(SV): -1999~+1999
Output( OUT1, OUT2) Alarm(Alarm1, Alarm2) Auto setting(AT) Display: LED
Control way1). PID Control(including ON/OFF, position PID and continuous PID)
(2). Auto Setting Control
AccuracyMeasurement Accuracy: ± 0.5%FS Compensation error of cold terminal: ± 2° C(amend within 0~50° C by soft)
Resolution: 14bit. Sampling period: 0.5Sec.
Setting RangeSetting Value(SV): Same range with PV
Proportional Band(P): 0~full range(ON/OFF Control when set to 0)
Integration Time(I): 0~3600Sec (no integral action when set to 0)
Derivative Time(D): 0~3600Sec(no derivative action when set to 0)
Proportional Period: 1~100Sec
On-off control output hysteretic loop width: 1~100° C(or other PV units)
Control Output(1)Currency output: DC 0~10mA, 4~20mA(RL less than 500Ω)
(2)Voltage output: DC 0-5V, 1-5V(RL more than 10K)
(3)Relay output: Contact capacity: 250V AC 3A(resistive load)
(4)Voltage Impulse output: 0-12V(applicable for solid state relay SSR)
(5)Silicon Controlled Rectifier(SCR) output: Zero-cross triggering or phase-shift triggering(resistive load)
(6)Output Contact Capacity: 250V AC 3A
Alarm output2 groups output at most, 12 modes
Inanlating resistanlemore than 50MΩ(500V DC)
Inanlating intensity1500V AC/min
Power consumedless than 10 VA
Work condition0~50° C, 30~85RH, no corrosive gas
Weightabt. 0.5Kg(CXTA type)