Basic Info.
After-sales Service
Online Video
Transport Package
Wooden Box Package
Specification
560mm long x 800mm wide x 1390mm high
Product Description
XX-6MM
The automatic Angle machine can grind and polish the surface cutting surface of the mixed stone egg-shaped ring surface. The number of processing layers is seven.
Principle: install 5 stepper motors, 5 actuators and 5 sensors.Mechanical arm for horizontal tension positioning reduction;
L operating process:
L 1 mode selection: 50 processing data are built-in for storage and transmission. Enter by window prompt, and the selected mode number is the current processing or programming storage number.
2. Layer number and plate number setting: namely, the number of layers (within which there are 7-10 layers) of stone processing and the number of processing boards (with 16 boards in each layer); for example, 8-16 of circular surfaces.In the first layer, there are 8 boards, there are 8 boards in the second layer, there are 8 boards in the second layer, there are 2=8 boards in the second layer, there are 16 boards in the third layer, then 3=16.
L 3. Angle and Angle setting: their layers, each plate manipulator stepper motor Angle numerical programming (note: each step motor running a circular number representation to 3200, namely, their Numbers for 1 0.1125 degrees, the following when programming. By numerical based on). : after entering the layers menu, Angle Angle was on behalf of the board, 1-15 are expressed as the Angle of 2-16 rebounds
L 4: machinist pitch Angle setting: the Angle of the manipulator and cd-rom programming each level, according to the processing of shape, after entering the layers menu, : according to A, B key to choose ze layer, layer number, press * confirm programming according to A, B key rapid adjustment, according to the C, D: key fine-tuning, specific to the specific shape processing parts. 5. Playing sand height Settings: namely the mechanical processing of their height, after entering the menu, press AB choose ze layer, layer number, press the * key to confirm programming press B A quick adjustment, C, D key fine-tuning, concrete generally will be subject to stone plate. But the specific situation will be subject to specific shape processing parts.
L is applicable to: corundum, spinel, ruby, turquoise, olivine, topaz/topaz, sapphire, tourmaline/tourmaline, garnet, agate, amber, tiger's eye, zircon, glass
L machinable shape: round, oval, square, rectangle, triangle, pear-shaped, heart-shaped, water droplets, horse eye shape, the plum flower, star, leaf shape, axes, three-dimensional beads, three-dimensional droplets, stereoscopic triangle Square ring surface, quit egg-shaped face, pear-shaped ring surface, etc
Auxiliary material: diamond forming disc/polishing disc/polishing powder
L technical parameters:
Voltage /Voltage: /AC220V
L motor Power /Power: 250W
Nature/nature speed: 2800r/min
L biggest plate size /The biggest plate size:8 talents
Quantity offlat: the number of machining layers is seven, with 16 boards in each layer
L shape size /Dimension: 580mm long x 800mm wide x 1390mm high
Guangzhou Panyu Zhuoji gem Machinery Co., Ltd., founded in 2003, is a gem machinery supplier integrating R & D, production and sales. The company has introduced a large number of professional production tools and advanced processes from home and abroad. After more than 10 years of time and careful design and manufacturing, it has now developed into an enterprise with a mature production, processing, sales and after-sales service system.The continuous improvement of product quality has made our products highly praised by the industry. The products are sold all over the country, Europe, America, Southeast Asia and other countries and regions. At the same time, it has become an important supplier of many gem processing bases, and is deeply recognized by users at home and abroad.Welcome customers to visit and talk about the core culture of the company1. Enterprise vision: take the revitalization of national industry as its own responsibility and build a well-known brand.2. Enterprise mission: always provide users with perfect gem machinery3. Enterprise values: achieve customers, create value and add luster to the world.4. Enterprise tenet: first class management, first-class technology, first-class products and first-class services. Business scope:Jewelry and gem processing equipment series1. Automatic processing equipment for gem cutting / cutting sheet2. Automatic CNC processing equipment / tools for colored gemstones.3. Automatic CNC processing equipment / tools for gem beads4. Jade jade bracelet processing equipment / tools5. Special shaped and heteromorphic processing equipment / tools6. Gem glue injection and glue filling optimization processing equipment / tools7. Vibrating barrel polishing processing equipment / abrasive8. Drilling equipment / toolsZhuoji Stone CNC Cutting Facer (Gem Machine Manual)1. Features(1) The whole machine adopts 5 stepper motors as the power source for action execution, and adopts 5-axis synchronous control technology for accuracyControl every action of gem carving and grinding. Mechanical accuracy of rotary motion is 0.12 5 degrees/step, linear motionThe mechanical accuracy is 0.006 25mm/step.The algorithm protects the property rights of control software.(1) The man-machine interface of the machine adopts 128 * 64 dot matrix LCD screen as the data display window, and data input completes data operation, which is convenient for users.(2) All motion in place detection sensors are realized by photoelectric switch modules, with long service life and high accuracyCharacteristics of.(3) The large capacity EEPROM memory is used as the storage of the machine operation data, and the user canAdjust, modify and save the running data to make the quality of the polished gemstones better. The machine can preset 15 kinds of miscellaneous shapes at the same timeThe polishing parameters of gemstones make it more convenient to process and convert different shapes.(4) The unique control data format is adopted. No matter what shape of gems are to be processed, the settings are as followsSix parameters can work: the number of plates of this layer, the grinding angle of this layer, the height correction value of this layer, and after the completion of this layerThe angle at which the first octagon of the next layer needs to be polished, the speed of this layer's polishing, and the inner corner when there are only 2 plates in this layerDegrees. After mastering the principle of data composition, users can easily design the processing data required for other shaped gemstones by themselves.2. Equipment characteristicsThis machine adopts advanced and reliable microcomputer technology for action execution control, with high precision and convenient use,It mainly consists of sand disc, polishing disc, octagonal hand, octagonal hand motor angle chain wheel, angle electricMachine, octagonal hand and angle position sensor assembly, lifting screw assembly of lifting motor, wear motor wear connecting rodLCD display, reset button and disk change transmission of components, lifting and swing grinding sensor componentsIt is composed of motion and position sensor components.The main component functions are as follows.() Sand disc: the machine and fine sand disc can be installed at the same time for rough grinding of the ring point and plate position of the gem stone blank.(2) Polishing disc, used for fine polishing of rough cut and ground gem plate position,And make the luminosity meet the requirements.(3) Octagonal hand: used to hold gemstones to be processed which are stuck on the processing bar.(4) Octagonal hand motor: used according to processing requirementsIt is to calculate the processing angle of the plate position of the rotating gem, and after one layer of processing is completedTransposition rotation to the processing angle of the first plate of the next layer (namely, the transposition angle).(5) Angle chain wheel and angle motor: give the processing angle of each layer of the gem, and then the lifting motor will cooperate with the rotation. In addition, it can also produce the action of inching the plate, and lift the gem to change the plate position after finishing the engraving and grinding of one plate position, so as to avoid edge scraping.(6) Octagonal hand and angle position sensor assembly: used to sense the initial position of the octagonal hand and the zero reference position of the octagonal hand angle. At the same time, when the octagonal hand is lifted for more than 1.5s, start the machine.(7) Lifting motor and lifting screw assembly: cooperate with the angle motor to change the working angle of the octagonal hand to meet the needs of different engraving and grinding angles for different layers(8) Swing grinding motor and swing grinding link assembly: the octagonal hand can perform the left and right swing grinding action to polish the plate position. There are several small holes on the swing grinding link assembly to adjust the swing amplitude, which is suitable for using discs of different diameters when working.(9) LCD display: it can display working parameters and edit and set working parameters in Chinese.Used to set and adjust working parameters.(10) Reset button: used to reset the machine or forcibly stop the operation of the working machine.3. Working principleThe machine adopts unique technology to organize gem processing data. No matter what shape of gem is grinded, its dataIt is easy to set up and adjust the machine.According to the principle of gem processing, the parameters used for gem processing areNumber of facets per layer; Grinding angle (angle) of the layer; The height of the layer (height correction value); Whether the layer is polished fast or slow (speed); After polishing the layer, how many angles should be turned to make the next layer (transposition angle); When the number of facets in the same layer is 2, the angle of rotation between two plates (inward rotation angle). one|4. Operation essentialsAll the above parameters have been digitally set and controlled by this miscellaneous gem engraving mill. The operation requirements are as follows:,(1) Number of facets per layer: refers to the number of facets to be engraved and ground on a layer. Users canIt is required to input different facet numbers. The system design only takes 99 facet numbers or less. The hundredth bit of facet numbers has a special function. When the facet number of a layer is set to 0, the system will stop all operations when it reaches the layer. After you enter the number of facets, the system will automatically divide the angle of each facet. If you enter the number of facets as 8, the system will automatically divide a layer into 8 facets, with each facet accounting for 400 * (3200 */8). When the user entersWhen the number of plates is 2, the system will have different responses: If the inner corner is set to 0, the system will automaticallyIt is divided into two facets, each of which occupies 160 * (3200 */2); If the inner corner is set to a value other than 0, the system will automatically divide a layer into two slab positions, and the angle between the two notches is equal to the angle value set for the inner corner.The switching action in the faceting process is completed by the octagonal hand motor driving the octagonal hand to rotate the corresponding angle.(2) Grinding angle of each layer: see Fig. 9 - 28. When grinding different layers, the angle between octagonal hand and grinding discIt is also different. This angle is called grinding angle. The angle motor is driven by the chain to form a specific angle value between the octagonal hand and the grinding plate plane. At the same time, the lifting motor drives the lifting screw assembly to raise and lower the appropriate height of the octagonal hand.(3) Layer height: because the length of the octagonal hand is fixed, in order to achieve carving and grinding of different layers, the octagonal hand and the grinding plateIf the plane is at different angles, it is necessary to adjust the height of the end of the octagonal hand to the appropriate working height (see Figure 9-28). The working height h value is automatically calculated by the system in order to compensate for errors caused by installation accuracy and other reasonsThe height correction value is set in the control system to correct the automatically calculated working height h value, so that each layer of the setting force is more accurate in the work of carving and grinding gemstones. Floor height adjustedThe execution is completed by driving the octagonal hand bracket with the lifting motor and the lifting screw assembly.(4) The engraving and grinding speed of this layer: When processing the gem plate position, the size of the engraving and grinding plate position and the working speed areFor example, the longer the duration of the gem point on the millstone, the position of the plateThe greater the speed is, the smaller the reverse is. That is, the plate position is large when the speed is slow, and small when the speed is fast. The same is true for the polishing method. adjustThe proper speed can avoid undercutting or splitting. In the point punching mode, the speed of engraving and grinding can be adjusted by changing the speed of angle motor nodding; In the polishing mode, by changing the rotation speed of the swing grinding motorThe step angle motor nods at the speed to realize the adjustment of engraving and grinding speed.(5) Transposition angle: After finishing grinding a layer, it is necessary to turn a corresponding angle (turn to the first plate of the next layer) to prepare for grinding the lower layer. This angle is called transposition angle.(6) Inward turning angle: the turning angle between two plates when the number of plates in the same layer is 2. This is for the design of miscellaneous shapeIt is set according to the processing data of gemstones. When some gemstones are carved and ground, two plates are carved and ground in the same layer, but notThe 180 ° symmetrical grinding is performed at a specified angle. The angle is in the same layerThis angle is called the inner angle, which is also an important parameter for the machine to realize the miscellaneous processing.As long as the above six parameters can be correctly and reliably controlled, any shape can be engravedAutomatic engraving and grinding of face shaped gemstones. This machine organizes data according to the above parameters,It realizes the gem processing by imitating manual operation, but it is more accurate than manual operation, so the quality of processed gemstonesExcellent.5. Data structureFrom the above analysis, we know that the miscellaneous gem carving mill needs 6 parameters when it works. Therefore, IWe designed a structural data type for the processing data of each layer:Before the machine works, process the gemstones with corresponding shapesThe data is loaded into the cengArray [16] array, and thenThe data in completes the carving and grinding of each layer of the gem, such asThe facet of the round gem is shown in Figure 9 - 29All boards are marked with data, and the first digit of the data representsThe number of layers and the subsequent digits represent the processing sequence of the board, as shown in FigIt can be seen that the circular surface is divided into three layers for carving and grindingI, the first layer first processes 16 facets, the second layer processes star faces,,The third layer processes the main surface of the crown; The specific process is as follows:(1) First raise the octagonal hand to a proper height, and at the same timeChange the angle of inclination between the octagonal hand and the grinding plate plane to 48 °,The first layer starts processing the first facet from the cutting and grinding line OA(11) . Remachine the second facet (2 -..... final machining the second facetSixteen facets (116). After finishing 16 facet machining, cut and grindThe line is OB. Because the first plate of the next layer is (21), it is cutThe grinding line is OC, and the octagonal hand needs to turn a transposition angle to prepare for the next layer of star plate processing, that is, from the cutting and grinding line OB to OC, the transposition angle is the angle BOC (33.75 ").(2) After the rotation of the transposition angle BOC is completed, the octagonal hand shall be raised to a suitable height and the octagonal hand shall be changed at the same timeThe inclination angle with the grinding plate plane is 71 *, and then machine (21). (22). * *. (27), (28) facets to complete theMachining of two layer faceting. The third layer is to process the kite surface. First, process the first facet (31) board. Therefore, octagonalTurn the hand over the transposition angle DOE (22.5 *)(3) After the rotation of the transposition angle DOE is completed, the rear octagonal hand reduces the appropriate height, and simultaneously changes the octagonal hand andThe inclination of the grinding plate plane is 57 ", and then process (31) (32) * * *. (37). (88) plates to complete the third layerThe whole round surface of the kite is finished.The processing data in the figure is as follows ↓It can be seen that the four shaped surface is divided into three layers to complete the carving and grinding, and the number of facets in the first layer is 16The inclination angle is 48. 0 ", the processing speed of this layer is gear 5, and the height correction value is 0mm. After the processing of this layer is completed, the octagonal handleThe transposition angle of the first processing line turning to the lower layer is 33. 75 ^, and the inward turning angle is 0 * (because this layer processesThe number of facets of is not 2 but 16. During processing, the machine will automatically divide the circumference of each plate by 22.5Layer 16 faces. The meaning of processing data in other layers is similar. Please refer to the third column of processing data, which representsThe processing speed of the layer. It can be seen that the first layer (16 plates) uses gear 5, the second (star plane) uses gear 9, and the third layer (windThe first) uses the fourth gear. The reason is that the grinding amount in front of the second layer star is the smallest, and it should be fast. The grinding amount in the third layer is large, and it should be slowThe grinding amount of 16 plates in one layer is between the other two layers. The speed gear value is selected according to the actual processing situationChoosing the right value can avoid the occurrence of undercut of gemstones, and ensure the even and beautiful processing position,A machining drawing and data of horse eye shaped surface are given below,Number of layers: 2 Angle: 58 Inner rotation: 0 Changing: 11.75Number of layers: 2 Angle: 60 Internal rotation: 1125 Transposition: 675Number of layers: 2 Angle: 60 Internal rotation: 1125 Transposition: 78754 layers: 4 angles: 71 inward rotation: 0 transposition: 33.755 Number of layers: 2 angles, 69 inward rotation: 22.5 Structure: 15756 layers, 2 angles: 69, inward rotation: 225, transposition: 33.75Number of lucky faces, 4 angles: 49, inward rotation: 0, transposition: 2258 layers: 2 angles, 47 inward turns: 45Transposition: 1592 Number of sides: 2 Angle: 47 Interior: 45 Transposition: 146 2510 Number of layers: 2 Angle: 46 Inner rotation: 225 Transposition: 1575Number of layers: 2 corner seats: 46 inward rotation: 225 seats: none19 - 30 Machining sequence and data of horse eye surface6. Control processIn order to make the machine work correctly, the detector is not used to set the operating parameters of the machine (Fig. 9(Figure 9-31). To be set before machine operationThe data are as follows.(1) Faceted. Set the plates processed in each layerNumber, the machine can process up to 8 layers, press onePress the "Number of Plates" key to enter the number of plates in the first layerSet the status. To change the data, you can useThe data addition and subtraction keys change the value of the corresponding bit.Press again after setting the number of plates on this layer"Number of boards" key will save the number of boards of this layerAnd call out the board number data of the next layer for useTo modify, press the "Number of boards" button all the way downThe number of boards in all layers can be set.For layers not to be machined, the number of plates is set to 0.The machine will automatically start processing from the first layer toThe layer with "0" boards ends, and the subsequent layer willNo more machining. If the number of front boards is setAfter setting, you can also press the "Reset" button on the machineReset the machine and exit the board number setting (belowThe data setting method is the same).The hundredth digit in the plate number data has special functions. When the hundredth digit is greater than 1, it means that the layer is being sandedNumber of remakes. The hundred digit value is ignored during polishing, and each layer is polished only once. For example, when setting circular face plateWhen the number of the first layer is set to "216", the number of the second layer is set to "8", and the number of the third layer is set to "308",It means that the first layer of 16 boards is played twice, the second layer of star board is played once, and the third layer of kite board is played three times,Then turn to the polishing disc. The first layer of 16 plates is polished once, the second layer of star plate is polished once, and the third layer of kite plate is polished-. times.(2) Angle. Set the angle of each layer of processing, which refers to the angle between the gem stick and the grinding plate plane. NativeUp to 16 layers can be processed. Press the "Angle" key to enter the setting state of the first layer's angle. To change the data,The value of the corresponding bit can be changed by using the data addition and subtraction keys. After setting the angle of this layer, press "Angle" again"Degree" key, the angle data of this layer will be saved, and the angle data of the next layer will be called out for users to modify, all the way downPress the "Angle" key until the angle of all layers is set. For layers not to be machined, angle data is not requiredIf the previous angle has been set, you can also press the "Reset" key on the machine to reset the machine and exit the angleset up.(3) Height correction (also called disk correction). Machining height of each layer. It varies with the angle. Machining angleThe higher the degree is, the higher the height is; otherwise, the lower it is. The machining height data has been automatically calculated by the machine, so it is unnecessary to setHowever, the automatically calculated data may not guarantee the landing accuracy of all layers under different rod lengthsThat's right. Therefore, during the adjustment operation, the setting of gemstones should be corrected according to the actual situation. This machine canTo process 16 layers, press the "Height Correction" key to enter the setting state of the first layer height correction, and change the numberAccording to, data addition and subtraction keys can be used to change the value of the corresponding bit. After setting the height correction value of this floor, pressOnce the "Height Correction" key is pressed, the height correction data of this layer will be saved and the height correction data of the next layer will be called outFor users to modify. Press the "Height Correction" key all the way down to the height of all layers
Address:
113 No. 5 Zhaoyang North, Taiping Village, Shatou Street Payu District, Guangzhou, Guangdong, China
Business Type:
Trading Company
Business Range:
Industrial Equipment & Components
Company Introduction:
Is a collection of scientific research, design, production, sales and maintenance of high-tech enterprises, the factory is located in China′s largest gem machinery production base and export base. Companies continue to introduce advanced production equipment and technology, such as precision lathe, CNC lathe, computer-aided design, etc., is the industry′s largest manufacturers, product categories covered gem stone cutting and cutting, beads, shaped molding, drilling, engraving, glue, dyeing, polishing, jewelry appraisal and other series of gem stone processing production line, has developed into gem stone processing industry, most complete product range, best known mechanical equipment, tools accessories manufacturers, the annual The average production capacity of 28, 000 units (sets).