Sintered Porous Plastic Filter Cartridge of PE, PA, PTFE Tube for Sale

                                        water filter cartridge sintered compressed pe/ptfe/pvdf element
Description:
PE sintered filter element uses UHMWPE as main raw material, pa sintered filter core uses UHMWPE and carbon fiber as main raw materials. By scientific formula high temperature sintering, the material conforms to gmp,fda requirements. UHMWPE has better acid and alkali resistance than ordinary polyethylene. Under 80c, its acid and alkaline resistance is equal to that of PTFE, and its rigidity and flexibility are better than ordinary polyethylene. It has good mechanical performance, and the same inside and outside of the filter core aperture, easy to recoil to remove slag. Filter layer thickness, high working pressure, can also ensure the filtering effect. Each filter element is tested for air bubble evenness before it leaves the factory to ensure that the micropore distribution is uniform.

Specification:
1, the following specifications and models are:
outer diameter * inner diameter * length commonly used dimensions:
Φ31*15*1000 , Φ31*20*1000 ,Φ38*20*1000 ,Φ38*15*1000 ,Φ50*20*1000,Φ65*30*1000 ,Φ85*45*1000 , etc., special requirements can be customized.
2, filtration accuracy:0.22,0.3,0.5,1,5,10,20,30,40,50,80,100micron, etc.
3,joints: Flat, M20, M30, M22,etc.

Note: according to the requirements of the user, we can produce all kinds of micropore elements with different sizes and porosity: cap, tube, rod, flake and so on. The product has the characteristics of high filtration efficiency, high tensile strength, high temperature resistance, corrosion resistance and so on. It is suitable for working conditions in different environments and is used as gas and liquid filter element.

Because of the large size, it is impossible to mark the price one by one. The actual unit price consults the seller.

Characteristic:
1. The large flow rate and high porosity ensure that the flow rate per unit area is larger;
2. The outer surface is smooth, the impurity is not easy to stick flat;
3. Strong anti-fouling ability, the same internal and external filtration accuracy, impurity can not be retained in the filter element, the sludge can be compressed to 70% water content;
4. Excellent performance-price ratio, the comprehensive performance of the filter is excellent, the price is cheap, suitable for water treatment, environmental protection sewage treatment, reclaimed water reuse, chemical products filtration and other large flow conditions;
5. Strong acid resistance, strong base corrosion, resistance to the dissolution of organic solvents and other high temperature strong corrosive chemical raw materials filtration;
6. High strength, good wear resistance, ensure its life;
7. Recoil backwash easy, can be used repeatedly;
8. Good toughness, the filter is not easy to break;
9. There is absolutely no threshing;
10. Strong voltage resistance.

Application:
1, filtration of large infusion water needles and pharmaceutical intermediates;
2, filtration of fermentation broth, oral liquid, biopharmaceutical, traditional Chinese medicine, etc.;
3, chemical industry: aluminum hydroxide, palladium catalyst, phosphor, zinc carbonate, sodium carbonate solution, barium sulfate, zinc sulfide, cadmium sulfide, etc.
4,Brewery: filtration of Beer, Medicine, Liquor, Wine, etc.
5, electroplating solution filtration;
6, internal combustion engine cleaning fluid precision filtration;
7, oil field washing water filtration;
8, precision filtration of ultra-pure water vegetation system in electronics industry.


Filter rod regeneration:
1. Physical method: because of the good mechanical properties of the filter rod, it is possible to use the compressed air of 0.6mpa to remove the slag by backblowing, which plays the role of regeneration of the capillary at the same time. However, the accumulation of particles in the filter layer after a long period of time will affect the filtration rate, so chemical regeneration should be carried out at this time.
2. Chemical method: immerse the clogged pe,pa filter rod in 5- 10% acid or lye solution, so that it is plugged in the micromaterial in the filter layer, and then wash back with water or air. Filter rod filter effect can be restored by 100%.

Packaging & Shipping
Packaging:
1.Products are packed by polybag then in carton, 1pcs/ctn. It can reduce abrasion when transport.
2.Products are packed by high quality carton, suitable for long distance ocean freight transportation as well as changing climate and with good resistance to moisture and shocks.
Delivery time:
1.If this kind of products is in stock, the product will be sent for you 1-7 days after payment.
2.If this kind of products is not in stock, the products will take about 7-25 days to produce.
3. Please confirm with us the model you'll purchase, and you prepaid the sample fee, after sample tested and qualified, we will refund this sample fee when you place the bulk order.


Contacts US:
If you have interest in any kind of our product, warmly welcome your inquiry. We will supply our best quality products and service for you.
MR. xiao
Mobile: +8617711718858