| Specification |
After-sales Service: Yes;
Warranty: 1 Years;
Humidity Control Range: 5%~95%;
Humidity Sensor Type: High-Precision Semiconductor Sensor;
|
After-sales Service: Whole Life Technical Support;
Warranty: One Year;
Detected Gas: Volatile Organic Compounds (Vocs);
Measurement Range: 0–50000 Ppm (Customizable Range);
Detection Principle: Infrared (IR);
Detection Accuracy: 0.01% Vol;
Explosion-Proof Rating: Exdibiict6GB;
Protection Level: IP67;
Response Time: T90 < 30 Seconds;
Signal Output: 4-20 Ma, RS485, Hart Protocol;
Switch Output: 4 Groups (2 in Use, 2 Reserved);
Rated Voltage: DC 24V;
Signal Acquisition: 16-Bit ADC Digital-to-Analog Conversion;
Ambient Temperature: -10°c to 40°c;
Display: OLED;
Range Switching: Ppm-Vol Freely Interchangeable;
Preprocessing Level: Customizable Preprocessing;
|
After-sales Service: Whole Life Technical Support;
Warranty: One Year;
Detect Gas: 1-4 Types of Gases (Carbon Monoxide Co, Hydrogen S;
Application Occasions: Petroleum, Chemical Industry, Medicine, Environmen;
Detection Principle: Electrochemistry, Catalytic Combustion, Infrared,;
Sensor Life: 2 to 3 Years for Electrochemical Principles , 5 to;
Working Power: 7.4 VDC, 1400mAh Large Capacity Rechargeable Polym;
Display: 2-Inch LCD Display;
Detection Method: Diffusion/Pumping Type, Standard Configuration: Ex;
Alarm Mode: Sound and Light Alarm , Vibration Alarm, Sound and;
Communication Interface: Standard Type-C Fast Charging and Communication, E;
Data Storage: Standard Data Storage Capacity Is No Less Than 200;
Protection Level: IP6 8;
Explosion-Proof Type: Intrinsically Safe;
Explosion-Proof Signs: Exia Iic T 4ga;
Weight: About 380g;
Standard Accessories: Instructions, Certificate, Warranty Card, USB Char;
|
After-sales Service: Whole Life Technical Support;
Warranty: One Year;
Detect Gas: Single Gas (Carbon Monoxide Co, Hydrogen Sulfide H;
Application: Fire Protection, Emergency Rescue, Confined Space,;
Detection Principle: Electrochemistry, Low-Power Infrared, etc., Depend;
Working Power Supply: 3.6VDC, 1650mAh Energy Battery, No Charging, Worki;
Display Method: 1.5-Inch LCD Display;
Detection Method: Diffusion Measurement;
Alarm Mode: Sound and Light Alarm, Vibration Alarm;
Communication Interface: Infrared, Optional Communication Base for Communic;
Data Storage: Support;
Protection Level: IP68;
Explosion-Proof Type: Intrinsically Safe;
Explosion-Proof Mark: Exia Iic T4 Ga;
Weight: About 200g;
Standard Accessories: Calibration Cover (Diffusion Type), Instructions,;
|
After-sales Service: Whole Life Technical Support;
Warranty: One Year;
Alarm Type: Sound and Light Alarm, 90 dB;
Usage: Portable Design for Flexible Operation;
Power Supply: 220 VAC / 24 VDC;
Sampling Method: Negative Pressure Extraction / Pump Suction;
Gas Supply Pressure: 0.3 MPa to 0.7 MPa;
Exterior Material: 304 Brushed Stainless Steel;
Core Material: 316L Stainless Steel;
System Piping: 8 mm PTFE (Polytetrafluoroethylene) Tubing;
Application Range: Suitable for Acidic, Alkaline, Vocs, and Other COM;
Weight: Approximately 45 Kg;
|
