| Specification |
After-sales Service: 12month Warranty,Lifelong Technical Service;
Function: Inertial Sensors Testing;
Display: Digital;
Usage: Electric Component Tester, Inertial Sensors Testing;
Type: Motion Simulator;
Environment: Room Temperature;
Warranty: With Warranty;
Power Source: AC 220-230V;
Weight: 〉10Kg;
Installation: Direct Connected;
Customized: Customized;
Rated Load Weight: Not Less Than 40kg;
Load Plate Size: Table Size 400mm;
Rate Resolution: Less Than 0.001deg/S;
Minimum Stable Rate: Less Than 0.005deg/S;
|
After-sales Service: yes;
Function: check;
Display: Digital;
Usage: Electric Component Tester;
Type: Electric Inductance Measuring Tester;
Environment: Room Temperature;
Warranty: 1 year;
Power Source: DC 100V-300V;
Weight: 〉10Kg;
Installation: Direct Connected;
Customized: Non-Customized;
Current display: Maximum current 30A, resolution: 0.01A;
Instrument power supply: AC/DC 220V±10%; 50Hz±2%;
External trigger voltage: AC/DC10-300V, current≤120A;
Operating Environment: -20℃~+50℃;
Relative humidity: ≤90%;
|
After-sales Service: 24 Hours on Line Services;
Usage: Electric Component Tester, Lightning Protection Device Tester;
Type: Electric Inductance Measuring Tester;
Customized: Customized;
Temp. Uniformity: +/-0.5 Oc/Min;
Temp. Range: -40oc~+150oc;
Temp. Constancy: +/-0.5 Oc/Min;
Heater: Iron-Chrome Wire Heater;
Blower: Centerifugal Blower;
Observation Window: Glass Incorporating Heat Generator;
Controller: Touch Screen Programmable Controller;
Compressor: Semi-Hermetic Compressor(France Imported Tecumseh);
Cooling Mode: Water Cooled;
Working Chamber Volume: 225L;
|
After-sales Service: 1 Year;
Function: Storage;
Display: Digital;
Usage: Electric Component Tester;
Type: Transformer Tester;
Environment: High Temperature;
Warranty: With Warranty;
Power Source: DC 100V-300V;
Weight: 0-10Kg;
Installation: Direct Connected;
Customized: Customized;
Output Voltage: 30kv ~ 90kv;
Output Frequency: 0.1Hz, 0.05Hz, 0.02Hz;
High Test Capacity: 5.5μf;
Measuring Length Range: Over-Current Protection.;
Measuring Method: Low-Voltage Pulse Method, Flash Current Method, Mu;
Blind Spots: 0 ~ 5m or No Blind Spots;
Standby Time: Can Be Used Continuously for About 6 Hours;
Control Unit Weight: 7kg;
|
After-sales Service: 1year;
Function: Storage;
Display: Digital;
Usage: Electric Component Tester, Gas Sensor Tester, Catalytic Element Tester, Lightning Protection Device Tester, Contact Resistance Tester;
Type: Transistor Tester;
Environment: Under 50dgree;
Warranty: With Warranty;
Power Source: DC 100V-300V;
Weight: 1.7kg;
Installation: Portable Precise;
Customized: Customized;
Product Name: Handheld Contact Resistance Tester;
Output Current: 100A;
Measuring Range: 0 ~ 4 MΩ;
Resolution: 0.1 μΩ;
Output Time: 60 S;
Measurement Accuracy: ±0.5%;
Operating Temperature: -10℃~50℃;
Relative Humidity: ≤85%Rh;
|
