| Specification |
Display: Screen 128*64 DOT Matrix White Screen (LCD);
Weight: 0-100Kg;
Processor: High-Performance Arm Cortex-M3 32-Bit Risc Core;
Input Function: Support up to 4-Wire Analog Inputs;
Output Function: Power Distribution, Variable Transmission, Relay a;
Communication Function: Interface Provide RS232c and RS485, Modbus RTU;
Power Supply: 220VAC, 50Hz AC; 24VDC (18-36VDC), 12VDC (9-18VDC);
Accuracy: Thermocouple Cold End Comp. Error &Plusmn;
Operating Environment1: Temperature 0-50℃ (Avoid Direct Sunlight);
Operating Environment2: Humidity 0-85%R.H. (No Condensation);
Meter Weight: ≤1kg;
|
After-sales Service: Life Long Support;
Warranty: 1 Year;
Type: AC Hipot Tester;
Temperature: 0-40℃;
Humidity: <=75%;
Output Voltage: 0-5kv<=+/-3%;
Leak Current Range: 0-100mA, Customized;
Max Output Power: 1W (1.0kv, 1.0mA);
Interface: RS232;
|
After-sales Service: Life Long Support;
Warranty: 1 Year or Extend;
Type: AC Resonant Test System;
Accuracy Grade: RMS 1.5;
Display: Touch Screen;
Power Source: 220V/380V,10 %Single Phase, 50Hz;
Frequency: 20Hz-300Hz;
Waveform: Sine;
Protection: Over-Current, Over-Voltage,Flash-Over;
Mode: Automatic and Manual Operation Mode;
Print: Support;
Tested Object: Cable, Gis, Transformer, Gil,Ect;
Test Time: 1hours or Customized;
Using Place: Outdoors or Indoors;
Partial Discharge: PC Less Than 10PC Support;
Cabliration Report: Factory Report or The Third -Party Support;
Max Test Voltage: up to 1000kv or Higher;
Max Capacity: up 10000kVA or Higher;
Product Name: AC Resonant Test System;
Calibration: Support Calibration;
|
After-sales Service: Life Time Support;
Warranty: 1 Year or Extended;
Type: Inductive Resonant Test Set;
Accuracy Grade: RMS 1.5;
Display: Touch Screen;
Power Source: 220V/380V,10 %Single Phase, 50Hz;
Product Name: AC Inductive Resonance Test Equipment;
Parameter: Can Be Customzed;
Frequency: 50Hz;
Operation Mode: Automatic and Manual;
Print: Support;
Calibration Report: Factory Issue or The Third Party Support;
Input Voltage: 220V/380V;
|
Max Diameter of Workpiece: 194mm;
Mass Scope of Workpiece: <900kg;
Type: Bottle Cap Torque Tester;
Maxcapacity: 20nm;
Accuracy Grade: 0.5;
Load Way: Electronic Load;
Loading Method: Dynamic Load;
Display: Digital;
Control: Manual Control;
Weight: 0-100Kg;
Power Source: AC220V;
Clamping Range: 5~170mm;
Net Weight: 12kg;
Size: 400mm*200mm*200mm;
|