| Specification |
After-sales Service: Yes;
Warranty: Two Years;
Logo Printing: Provide OEM and ODM;
Size: Middle;
Customized: Customized;
Type: Motion Control;
Material: Metal;
Input Power Specifications: 24V+-10%,3A;
Under Voltage Level: 18V;
Power-Down Save Time: 1.7s;
Pollution Level: Level 2;
Altitude: 2000m;
Degree of Protection: IP20;
Cooling Method: Natural Cooling;
Power-Down Storage Capacity: 512kb;
Program Data Capacity: 10MB;
|
Logo Printing: Without Logo Printing;
Size: 1-300 mm for Length, Width and Thickness;
Customized: Both Customized & Non-Customized;
Type: Wear Part;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: K10/K20/K30/K40/Yl10.2/Yg6/Yg6X/Yg8/Yg10X/Yl10.2;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: Metal Machining and Wear Parts;
Customized Product: Available;
|
Logo Printing: Without Logo Printing;
Size: Dia.1.0-40 mm, Length 10-500 mm;
Customized: Both Customized & Non-Customized;
Type: Cutter Bar;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: K10/K20/K30/K40/Yl10.2/Yg6/Yg6X/Yg8/Yg10X/Yl10.2;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: Carbide Body for Drill Bits/ Endmills / Reamers;
|
Logo Printing: Without Logo Printing;
Size: Dia.1.0-40 mm, Length 10-500 mm;
Customized: Both Customized & Non-Customized;
Type: Cutter Bar;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: K10/K20/K30/K40/Yl10.2/Yg6/Yg6X/Yg8/Yg10X/Yl10.2;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: Carbide Body for Drill Bits/ Endmills / Reamers;
|
Logo Printing: Without Logo Printing;
Size: Dia.1.0-40 mm, Length 10-500 mm;
Customized: Both Customized & Non-Customized;
Type: Cutter Bar;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: K10/K20/K30/K40/Yl10.2/Yg6/Yg6X/Yg8/Yg10X/Yl10.2;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: Carbide Body for Drill Bits/ Endmills / Reamers;
|
