Integrated Power&Video Elevator Cable

Executive standard (Reference) GB5023.6-1997 GB4T14864-93
 
Conductor: Tinsel copper wire or several strands of bare copper wire twisted
 
Insulation: PE solid core
 
The outer conductor: (screened) portait clad aluminum foil, bare copper or tinned copper; (with tensile rope)
 
Jacket: flexible PVC, gray / black, plus two strands of steel wire
 
Installation notes
1 elevator cable should be free hung, fully back twist before installing and using;
 
2 elevator cable should not be knotted or wave distortion;
 
3 after stripping, the cable suspension strengthened core should be fixed, and should bear tension;
 
4 The suspension strengthened core should be kept consistent with the tension force of symmetry, and the average value of the deviation should be less than 5%;
 
5 cable should not be touched with pit ground and bottom border of the elevator car,should avoid friction with other objects;
 
6 there should not be any phenomenon such as virtual connecting virtual welding in the video power interface and should be firmly fixed;
 
Application
used for power supply or video signal transmission in Video monitoring circuit such as elevator or lift