Specification |
Material: Polypropylene;
Usage: Industrial;
Raw Materials: PE;
Color: Blue, White, Transparent;
Size: 2436, 1845, 1836, 2645;
Thickness: 3, 3.5, 4.0 Micron;
Tackiness: High/Middle/Low Sticky Mat;
Standard Structure: 30 Pages Per Piece (Solid Page for Page 32), 60pag;
Ability of Stickiness: 99.9%(5steps);
The Heat Resistance: 60 Degrees;
|
Material: Rubber Sheet;
Usage: Industrial Rubber Slab, Industrial, Flooring, Printing, Rubber Floor Covering;
Feature: Wear-resistant, Impact-resistant, Heat-resistant, Corrosion-resistant, Insulating, Cold-resistant;
Raw Materials: Rubber Sheet;
Medium: Pure Gum Rubber Sheet and Fabric;
Performance: Antistatic/Heat-Resistance/Freon-Proof/Waterproof;
Color: Custom;
Quality: Industrial Grade;
Working Temperature: -60~180 Degree;
Thickness: 3~8mm;
Width: 1.2m, 1.5m, 1.6m and Custom;
Length: 10m and Custom;
Surface: Smooth;
Hardness: 65+/-5 Shore a;
Application: High Traffic Areas, Hallways, Corridors, Gym etc;
|
Material: Nitrile Rubber;
Usage: Industrial;
Feature: Corrosion-resistant;
Raw Materials: Nitirle;
Medium: Nitirle;
Performance: Disposal;
Color: White Sheet;
Solid Content: 44%;
Surface Tension: 50;
pH Value: 7-9;
Visocity: <100;
|
Material: Particles of Rubber;
Usage: Industrial Rubber Slab, Industrial, Flooring, Rubber Floor Covering;
Feature: Wear-resistant, Impact-resistant, Heat-resistant, Cold-resistant;
Raw Materials: Particles of Rubber;
Medium: Pure Gum Rubber Sheet and Fabric;
Performance: Insulating Rubber Slab;
Color: Black, Red, Green and So on.;
Rebound Ratet: ≥35%;
Tensile Strength: ≥0.8MPa;
Cold Resistant: -40;
Density: 1.0g/cm3;
Elongation: ≥48.2%;
Compression Recovery Rate: ≥95%;
|
Material: Particles of Rubber;
Usage: Industrial Rubber Slab, Industrial, Flooring, Rubber Floor Covering;
Feature: Wear-resistant, Impact-resistant, Heat-resistant, Cold-resistant;
Raw Materials: Particles of Rubber;
Medium: Pure Gum Rubber Sheet and Fabric;
Performance: Insulating Rubber Slab;
Color: Black, Red, Green and So on.;
Rebound Ratet: ≥35%;
Tensile Strength: ≥0.8MPa;
Cold Resistant: -40;
Density: 1.0g/cm3;
Elongation: ≥48.2%;
Compression Recovery Rate: ≥95%;
|