| Specification |
Type: Insulation Tape;
Chemistry: Waterproof;
Material: Yarn;
Color: White;
Thickness: 0.1mm-0.5mm;
Tensile Strength: More Than 18n/Cm;
Elong-Ation: More Than 12%;
Short Term Stability: 230 Celsius Degrees;
Long Term Stability: 90 Celsius Degrees;
Moisture Conten: Less Than 6%;
|
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor;
Type: Insulation Tape;
Chemistry: Organic Insulation;
Material: Plastic;
Thermal Rating: H 180;
Maximum Voltage: <10KV;
Classification: Organic Insulating Material;
Color: Yellow;
Thickness: 0.06.0.08mm;
Young’s Modulus: >=3.1gpa;
Coefficient of Thermal Expansion: <27ppm/Degree;
Insulation: Electrical Insulation;
Temperature: High Temperature Resistance;
Protection: Protection of FPC;
Film: Kapton Film;
Label: Pi Label;
|
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Insulating Varnish;
Type: Insulation Sleeve & Tube;
Chemistry: Hybrid Insulation;
Material: Rubber;
Thermal Rating: Y 90;
Maximum Voltage: 20KV~100KV;
Classification: Hybrid Insulation Materials;
Color: Grey;
Brand: Eko;
Hardness(Shore C): 40±5°;
Density(G/Cm³): 1.2±1;
Shrinkage Ratio: 3:1;
Tensile Strength (MPa): 50≥0;
|
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Insulating Varnish;
Type: Insulation Sleeve & Tube;
Chemistry: Hybrid Insulation;
Material: Rubber;
Thermal Rating: Y 90;
Maximum Voltage: 20KV~100KV;
Classification: Hybrid Insulation Materials;
Color: Grey;
Brand: Eko;
Hardness(Shore C): 40±5°;
Density(G/Cm³): 1.2±1;
Shrinkage Ratio: 3:1;
Tensile Strength (MPa): 50≥0;
|
Application: Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Insulating Varnish, Switch Baseplate;
Type: Insulation Tape;
Chemistry: Organic Insulation;
Material: Rubber;
Thermal Rating: Y 90;
Maximum Voltage: <10KV;
Classification: Organic Insulating Material;
Color: Yellow&Green;
Brand: Hxr;
Thickness: 0.13mm;
Environment Temperature: -20ºC~80ºC;
Sample: Available;
Lead Time: 10-20 Days;
|
