| Specification |
After-sales Service: 24h Online Technical Support;
Warranty: 1 Year;
Condition: New;
CNC or Not: CNC;
Voltage: 380V;
Spindle Motor: Hqd9kw;
Spindle Speed: 0-18000rpm/Min;
Driver Motor: Stepper;
X/Y Transmission: Rack and Pinion;
Working Table: Vacuum;
Working Voltage: 380V/50Hz;
Atc: 12 Tools;
|
Condition: New;
CNC or Not: CNC;
Voltage: AC380V/50/60Hz(Optional:220V, 3pH, 50Hz);
X,Y,Z Working Area: 1500*3000*300mm;
Structure: Thicken Steel Square Tube Heavy Structure;
Working Voltage: 380V, 3pH, 60Hz ( 220V for Optional);
Table Surface: Vacuum and T-Slot Working Table with 6 Zones;
Spindle: 5.5kw Chang Sheng Water Cooling Spindle;
Spindle Speed: 0-24000rpm;
X, Y Structure: Helical Gear and Rack Transmission, Taiwan PMI Lin;
Z Structure: Taiwan Tbi Ball Screw, Taiwan PMI Linear Rail #20;
Motor and Driver: 750W Japan Panasonic Servo;
Inverter: 5.5kw Fuling Inverter;
Control System: Taiwan Lnc Control System with Mpg Hand Wheel;
Vacuum Pump: 4kw German Becker Vacuum Pump;
Rotary Device: Rotary Device(Diameter in 200mm);
|
Condition: New;
CNC or Not: CNC;
Voltage: AC380V, 3pH, 50/60Hz;
Dimension(L*W*H): 5000*2800*2450mm;
Control System: Taiwan Syntec 4 Axis Control System;
Inverter: 11kw Delta Inverter;
Spindle Power: 9kw Italy Hsd Atc Air Cooling Spindle;
Drive Motors: 850W Yaskawa;
X, Y Structure: Gear and Rack Transmission, Taiwan Hiwin Linear Ra;
Z Structure: Taiwan Tbi Ball Screw, Taiwan Hiwin Linear Guide;
Type: Engraving Router;
Spindle Layout: Spindle Over;
Spindle Number: Single-Spindle;
|
Condition: New;
CNC or Not: CNC;
Voltage: 380V, 3phase, 50Hz(Option: 200V);
Dimension(L*W*H): 4200*2300*1650mm;
Control System: DSP A11 Control System;
Spindle: 7 Kw Italy Hsd Air Cooling Spindle;
Spindle Speed: 0-24000rpm;
Motor: 850W Japan Yaskawa Servo;
Driver: 1kw Yaskawa Driver;
Inverter: 7.5kw E Type Taiwan Delta Interter;
Table Surface: T-Slot and Vacuum Working Table;
Type: Engraving Router;
Spindle Layout: Spindle Over;
|
After-sales Service: 1 Year;
Warranty: 1 Year;
Condition: New;
CNC or Not: CNC;
Voltage: 380V, 3phase, 50/60Hz;
Working Area: 600*1500*300mm;
Spindle Power: 3kw Changsheng Water Cooling Spindle;
Spindle Speed: 0-24000rpm;
Working Voltage: 220V, 1phase, 50Hz;
Motor Driver: 400W Panasonic Servo Motor & Driver;
Inverter: 3.7kw Fuling Inverter;
Table Surface: T-Slot and Vacuum Working Table;
Control System: Mach3 Controller with Wireless Handle;
Lubrication System: Manual Lubrication System;
Mist Cooling Sprayer: Water Mist Cooling Sprayer;
Vacuum Pump: 3kw Water Cycle Vacuum Pump with Water Tank;
Dust Collector: 1.5kw Double Pockets Dust Collector, (220V, 1pH, 5;
Tool Sensor Calibration: Simple Tool Sensor Calibration;
|
