Specification |
After-sales Service: Engineer Online Guidance;
Warranty: Until Product Being Installed;
Standard: ASTM, JIS, GB, AISI, DIN, BS;
Surface Treatment: Coated;
Technique: Cold Rolled;
Application: Boiler Plate;
Edge: Slit edge;
Stock: Stock;
Base Material: Hot DIP Galvanized/ Galvalume Steel Coil;
Coating Mass: Z30-275G/M2 Al-Zn30-180G/M2;
Thickness: 0.12-1.2mm;
Tolerance of Thickness: +-0.02mm;
Width: 600-1250mm;
Tolerance of Width: +-2mm;
Steel Grades: Dx51d, Dx52D, Dx53D, S220gd,SGCC, G550;
Type of Paint: PE, PVDF, SMP, HDP;
Top Coating: 15-25 Um;
Back Coating: 5-12 Um;
Weight of Coil: 3-5ton or as Your Requestment;
ID: 508/610mm;
Package Method: Vertical, Horizontal;
Glossiness: 35-65;
Lifetime: 15-20 Years;
|
Standard: ASTM, JIS, GB, AISI, DIN, BS;
Surface Treatment: Coated;
Technique: Electrolytic;
Application: Tmainly Used for Making Meta;
Edge: Slit edge;
Stock: Stock;
Thickness: 0.13-0.65mm;
Width: 20-600mm;
Surface: Finish Tstone, Bright, Golden Lacquered;
Coil ID: 400mm,508mm;
Grade: Tmr SPCC Dr8 Q195L S08al SPTE;
Hardness: T1 ,T2,T3,T4,T5,Dr8;
Coating: T5.6/5.6, 2.8/2.8 2.8/5.6;
Weight: 1-2 Tons;
Package: Waterproof Standard Export Packing;
Shipment: by 20FT Container;
|
Standard: ASTM, JIS, GB, AISI;
Surface Treatment: Non;
Technique: Cold Rolled;
Application: Container Plate;
Edge: Mill;
Stock: Stock;
Material: Q195,Q235, SPCC, Spcd, Spce, DC01-06, St12;
SD: JIS G3141-1996, En 10131-2006, DIN En 1002;
Thickness: 0.14mm - 4.0mm;
Width: 355/600/716/914/1000/1250/1500 (Mm) or Per Custome;
|
Warranty: 8-10 Years;
Standard: ASTM, JIS, GB, AISI, DIN, BS;
Surface Treatment: Prepainted;
Technique: Hot Dipped;
Application: Roofing;
Edge: Slit edge;
Stock: Stock;
Thickness: 0.13mm-1.3mm;
Width: 600mm-1250mm;
Top Paint: 15 to 25 Um;
Back Paint: 10 +/- 5 Um;
ID: 508mm/610mm;
Coil Weight: 3-5 Tons;
Zinc Coating: 30g-270g/Psm;
Gloss: 65%-80%;
Feedback: Within 24 Hours;
Package: Waterproof Standard Export Packing;
|
Standard: ASTM, JIS, GB, AISI, DIN, BS;
Surface Treatment: Coated;
Technique: Hot Dipped;
Application: Construction Material;
Edge: Slit edge;
Stock: Stock;
Thickness: 0.15-1.30mm;
Width: 600-1250mm;
Top Paint: 15+5;
Back Paint: 5-7;
ID: 508/610mm;
Coil Weight: 3-8 Tons;
Zinc Coating: 50g-250g/Psm;
Gloss: 65%-80%;
Feedback: Within 24 Hours;
|