Specification |
Plastic Type: Thermosetting Plastic;
Plastic Form: Granule;
Molding Method: Injection Molding;
Design Software: Ug, Solidworks, PRO-E;
Standard: Dme;
Runner: Cold Runner;
Cavity: Single Cavity or Multi Cavities;
Application: Daily Used Commodity;
|
Plastic Type: Thermosetting Plastic;
Plastic Form: Dispersoid;
Molding Method: Calendering Molding;
Colour: Customized;
|
Plastic Type: Thermosetting Plastic;
Plastic Form: Granule;
Molding Method: Compression Molding;
Color: White, Blue, Red, Green, Brown, Yellow, Nature;
Material: PTFE;
Density: 2.1-2.3G/Cm3;
Thickness: 0.03 0.04 0.05 0.06 0.08 0.1 0.2 0.;
Tensile Strength: No Less Than 14MPa;
Tear Elongation: No Less Than 150%;
Width: 20-300mm;
|
Plastic Type: Thermosetting Plastic;
Plastic Form: Granule;
Molding Method: Compression Molding;
Color: White, Blue, Red, Green, Brown, Yellow, Nature;
Material: PTFE;
Density: 2.1-2.3G/Cm3;
Thickness: 0.03 0.04 0.05 0.06 0.08 0.1 0.2 0.;
Tensile Strength: No Less Than 14MPa;
Tear Elongation: No Less Than 150%;
Width: 20-300mm;
|
Plastic Type: Thermosetting Plastic;
Plastic Form: Granule;
Molding Method: Compression Molding;
Color: White, Blue, Red, Green, Brown, Yellow, Nature;
Material: PTFE;
Density: 2.1-2.3G/Cm3;
Thickness: 0.03 0.04 0.05 0.06 0.08 0.1 0.2 0.;
Tensile Strength: No Less Than 14MPa;
Tear Elongation: No Less Than 150%;
Width: 20-300mm;
|