Specification |
Logo Printing: with Logo Printing;
Size: Middle;
Customized: Customized;
Type: Mud Motor;
Material: Stainless Steel;
Recommended Hole Size: 83-121mm;
Input Flow Rate: 1.5-3.5L/S;
Pressure Loss: 3.2MPa;
Bit Speed: 185-430r/Min;
Working Torque: 200n.M;
Delay Dynamic Torque: 350n.M;
Output Power: 4.3-10.1kw;
Drilling Weight: 5kn;
Max Drilling Weight: 10kn;
Joint Thread: 11/2reg;
|
Logo Printing: Without Logo Printing;
Customized: Both Customized & Non-Customized;
Type: Cutting Tool;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: K10/K20/K30/K40/Yl10.2/Yg6/Yg6X/Yg8/Yg10X/Yl10.2;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: for Cutting and Mining Tools;
|
Logo Printing: Without Logo Printing;
Size: Standard;
Customized: Both Customized & Non-Customized;
Type: Cutter Bar;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: K10/K20/K30/K40/Yl10.2/Yg6/Yg6X/Yg8/Yg10X/Yl10.2;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: Carbide Body for Drill Bits/ Endmills / Reamers;
Finishing: Coated;
|
Logo Printing: Without Logo Printing;
Size: Od12~300xid6~95 Mmxt0.6~4.5 mm;
Customized: Both Customized & Non-Customized;
Type: Cutting Tool;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: K10/K20/K30/K40/Yl10.2/Yg6/Yg6X/Yg8/Yg10X/Yl10.2;
Surface Finishing: Polished and Unpolished;
Main Using Purpose: for Paper, Tobacco, Rubber, Fibre and Metals;
|
Logo Printing: Without Logo Printing;
Size: T1-20xw2-40XL20-400;
Customized: Both Customized & Non-Customized;
Type: Cutting Tool;
Material: Tungsten Carbide;
Wc+Co Powder: 100% Virgin Material;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Grades: K10/K20/K30/K40/Yl10.2/Yg6/Yg6X/Yg8/Yg10X;
Surface Finishing: Polished and Unpolished;
Thickness: From 1.0 mm to 20 mm;
Main Using Purpose: Wood Working, Tool Parts, VSI Crucher,Cast Iron;
|