Specification |
Condition: New;
CNC or Not: CNC;
Voltage: 380V;
Table Size: 1220*2440mm;
Max Speed: >35000mm/Min;
Max Working Speed: >30000mm/Min;
Repeatable Positioning Accuracy: ±0.02mm;
Work Fixing: Vacuum Suction Table;
Processing Instructions: G Code*, Eng, U00*, Mmg*, Plt;
Power(Without Spindle): 3000W Above;
Spindle Power: 4.5/6/7.5kw;
Power Voltage: AC380V/50Hz(220V Is Optional);
Driving Mode: Servo Drive;
|
After-sales Service: 24h Online Technical Support;
Warranty: 1 Year;
Condition: New;
CNC or Not: CNC;
Voltage: 380V;
Spindle Motor: Hqd 9kw;
Spindle Speed: 0-18000rpm/Min;
Atc: 12 Tools;
Driver Motor: Yaskawa Servo Motor;
X/Y Transmission: Rack and Pinion;
Working Table: Vacuum;
|
After-sales Service: with;
Warranty: 1 Year;
Condition: New;
CNC or Not: CNC;
Voltage: 220/380V;
Work Area: 1300*2500*200mm;
Limit: Omron;
Control System: DSP/Mach3/Nc Studio;
Motor and Driver: Stepper Motor and Leadshine Driver;
Spindle: 3.0kw Water Cooling Spindle;
Inverter: Fuling/Delta/Best;
Table: T-Slot Table;
Square Rai: Taiwan Hiwin;
Transmission: X Y-Axis Rack, Z Ball Screw;
Lubrication: Manual Oil System;
Tool Sensor: with;
|
After-sales Service: Support;
Warranty: 2 Years;
Condition: New;
CNC or Not: CNC;
Voltage: 220V;
X,Y,Z Working Area: 1300X2500X200mm;
Table Size: 1700X3040mm;
X,Y,Z Traveling Positioning Accuracy: +-0.03/300mm;
X,Y,Z Repositioning Positioning Accuracy: +-0.05mm;
Lathe Structure: Welded Structure;
X, Y Structure: Rack Gear Transmission, Shaft Linear Bearings;
Z Structure: Ball Screw, Shaft Linear Bearings;
Max. Consume Power: 6.5kw;
Max. Speed: 0-32000mm/Min;
Max. Working Speed: 0-20000mm/Min;
Spindle Power Motor: 3.2kw Water-Coolant Spindle;
Spindle Speed: 0-24000rpm;
Drive Mode: Stepper Motor and Driver;
Operating System: Nc-Studio;
Command: G Code, *Uoo, *Mmg, *Plt;
|
After-sales Service: Online+to Door;
Warranty: 2 Years;
Condition: New;
CNC or Not: CNC;
Voltage: 220V, 380V, 415V;
Kay Words: Woodworking CNC Router;
Rails: Taiwan Tbi Ball Screw;
Control System: Nc Studio/DSP/Mach3/Optional;
Body Structure: Thicken Steel Made;
Motor: Stepper Motors(Servo Motors and Driers Optiona);
Spindle Power: 3.2kw Watercold/3.5kw Aircold/Optional;
Software: Artcam;
Guide: Taiwan Hiein/PMI 20 Square Rails;
Spindle Speed: 18000-24000rmp;
OEM: Supplied;
Working Dictate: G Code;
Flash Memory: 512m;
Tool Sensor: Yes, Included;
Auto Oil Lubricator: Yes, Included;
Table: T-Slot /Vacuum;
|