Specification |
Type: Rigid Circuit Board;
Dielectric: FR-4;
Material: Fiberglass Epoxy;
Flame Retardant Properties: V0;
Mechanical Rigid: Rigid;
Processing Technology: Electrolytic Foil;
Base Material: Copper;
Insulation Materials: Epoxy Resin;
Model: PCB;
Brand: Shengyi, Kb, Nanya, Ilm;
Criteria: Aql II 0.65;
Hole Sizes: 0.25mm;
Bevel Edge: Yes;
Impedance: 50/90/100 Ohm;
Trace Width(Min.): 4mil;
Surfaec Treatment: HASL;
|
Type: Rigid Circuit Board;
Dielectric: FR-4;
Material: Fiberglass Epoxy;
Flame Retardant Properties: V0;
Mechanical Rigid: Rigid;
Processing Technology: Electrolytic Foil;
Base Material: Copper;
Insulation Materials: Epoxy Resin;
Model: FR-4;
Brand: Abis;
Solder Mask: Green, Red, Black, Yellow, Purple...;
|
Type: Rigid Circuit Board;
Dielectric: FR-4;
Material: Fiberglass Epoxy;
Flame Retardant Properties: V0;
Mechanical Rigid: Rigid;
Processing Technology: Electrolytic Foil;
Base Material: Copper;
Insulation Materials: Epoxy Resin;
Model: FR-4;
Brand: Abis;
Solder Mask: Green, Red, Black, Yellow, Purple...;
|
Type: Rigid Circuit Board;
Dielectric: FR-4;
Material: Fiberglass Epoxy;
Flame Retardant Properties: V0;
Mechanical Rigid: Rigid;
Processing Technology: Electrolytic Foil;
Base Material: Copper;
Insulation Materials: Epoxy Resin;
Model: FR-4;
Brand: Abis;
Solder Mask: Green, Red, Black, Yellow, Purple...;
|
Type: Rigid Circuit Board;
Dielectric: FR-4;
Material: Fiberglass Epoxy;
Flame Retardant Properties: V0;
Mechanical Rigid: Rigid;
Processing Technology: Electrolytic Foil;
Base Material: Copper;
Insulation Materials: Epoxy Resin;
Model: FR-4;
Brand: Abis;
Raw Material: Fr-4,Cu Base,High Tg Fr-4,PTFE,Rogers,Teflon etc.;
Board Thick: 1.6mm;
Copper Thick: 2oz;
Quick Turn for 2layer: 24hours;
Minimum Space/Line: 0.075mm;
Surface Finish/Treatment: HASL,Enig,Chem,Tin,Flash Gold, OSP, Gold Finger;
|