Specification |
Max.Head: 30-50m;
Max.Capacity: <50 L/min;
Driving Type: Motor;
Material: Cast Iron;
Structure: Single-stage Pump;
Assembly: Booster Pump;
Power: Electric;
Start Up: Electric Pump;
Type: Jet Pump;
Application: Clean Water Pump;
Industry: Clean Water Pump;
Media: Clean Water Pump;
Performance: No Leakage Pump;
Theory: Jet Pump;
Motor Shaft: 45#/304# Stainliss Steel;
Motor Sheet: Cold Silicon Rolling Sheet;
Mechanical Seal: NBR/Ceramic/Carbon;
Insulation: B/F;
Protection: IP44;
|
Material: Stainless Steel;
Structure: Booster Pump Sets;
Application: Booster Pump Sets;
Media: Water;
Manifold Material: SS304, 304L, 316, 316L, Ss321, Ss347h;
Length: 200mm-8000mm;
Header Nominal Diameter: 1/2''-16'' or as Your Drawing;
Wall Thickness: 1.0mm - 3.0mm;
Pressure: 10bar, 16bar, 25bar, 40bar, 100bar;
Surface Treatment: Electrolytic Polishing, Sandblasting, Brushed,etc;
Standard: According to Your Drawings;
Welding: TIG;
The Angle of Main Pipe and Branches: 90°+/-0.5°;
|
Material: Stainless Steel;
Structure: Water Treatment/Pump Sets Fittings;
Assembly: Booster Pump;
Type: Water Treatment Systems and Pump Systems Sets;
Application: Booster Pump System;
Media: Water;
Header Material: SS304, 304L, 316, 316L, Ss321, Ss347h;
Header Diameter: 1/2''-16'';
Header Branch: 2-12 Branches;
Header Length: 200mm-8000mm;
Header Wall Thickness: 1.0mm - 3.0mm;
Header Pressure: 10bar, 16bar, 25bar, 40bar, 100bar;
Header Finish: Electrolytic Polishing,Passivation,Brushed,etc.;
Header Usage: Pump/Water Treatment/Floor Heating System,etc.;
Welding: TIG;
The Angle of Main Pipe and Branches: 90°+/-0.5°;
|
Material: Stainless Steel;
Structure: Water Treatment Systems and Pump Systems Sets;
Type: Water Treatment Systems and Pump Systems Sets;
Application: Booster Pump Sets;
Media: Water;
Theory: Mixed Flow Pump;
Main Material: SS304, SS304L, SS316, SS316L, Ss321, Ss347h;
Length: 200mm - 8000mm;
Diameter: DN15 - DN500;
Wall Thickness: 1.0-3.0mm;
Pressure Range: 8 Bar, 10 Bar, 16 Bar, 25 Bar, 40 Bar;
Surface Treatment: Polishing, Pickling and Passivation, etc;
Welding: TIG;
Angle of Header and Branches: 90°+/-0.5°;
Diameter of Branches: 1/8" - 8" or Customized;
|
Material: Stainless Steel;
Structure: Booster Pump Sets;
Application: Booster Pump Sets;
Media: Water;
Manifold Material: SS304,304L,316,316L,Ss321,Ss347h;
Length: 200mm-8000mm;
Nominal Diameter: 1/2''-16'' or as Your Drawing;
Wall Thickness: 1.0mm - 5.0mm;
Pressure Range: 8 Bar,10bar, 16 Bar,25 Bar,40 Bar;
Surface: Electrolysis, Polishing,Sand Blasting, etc;
Standard: According to Your Drawings;
Welding: TIG;
Vertical Angle Between Main Pipe and Bra: 90°+/-0.5°;
|