Specification |
Material: PTFE;
Kind: PTFE Sheet;
Water Absorption: 1.5%~3.5%;
Contraction Percentage: 1.5%~5.0%;
Tensile Strength: 3.46MPa;
Thickness: 0.8-50mm /Customized;
Ultimate Elongation: ≥200%;
Apparent Density: 2.3±0.1 g/cm3;
Hardness: M65;
Color: White /Customized;
Melting Point: 327ºC;
Size: Customized;
Processing Service: Cutting, Moulding;
Working Temp: -180~260ºC;
|
Material: Acrylic;
Kind: Available in Many Colors;
Water Absorption: 0.1%~0.3%;
Contraction Percentage: <0.4%;
Tensile Strength: 30~40MPa;
Density: 1.2 g/cm3;
Thickness: 1-30mm;
Color: Clear, Red, White, Yellow, Orange, Black, etc;
Good Light Transmission: Good Weather Resistance;
|
Material: Acrylic;
Kind: Available in Many Colors;
Water Absorption: 0.1%~0.3%;
Contraction Percentage: <0.4%;
Tensile Strength: 30~40MPa;
Density: 1.2 g/cm3;
Thickness: 1-30mm;
Color: Clear, Red, White, Yellow, Orange, Black, etc;
Good Light Transmission: Good Weather Resistance;
|
Material: Acrylic;
Kind: Available in Many Colors;
Water Absorption: 0.1%~0.3%;
Contraction Percentage: <0.4%;
Tensile Strength: 30~40MPa;
Density: 1.2 g/cm3;
Thickness: 1-30mm;
Color: Clear, Red, White, Yellow, Orange, Black, etc;
Good Light Transmission: Good Weather Resistance;
|
Material: EVA Foam, PE Foam;
Kind: Color Plastic Sheet;
Water Absorption: <0.01%;
Contraction Percentage: 2.0%~5.0%;
Tensile Strength: 3.46MPa;
Density: 20-270kg/M3;
Hardness Shore C: 20-80;
Tensile: >3MPa;
Elongation: >120%;
Tearing Strength: 260n/M;
Compression Strength: >30+/-10kpa;
Dimensional Change: <3.2%;
Thermal Conductivity: <0.038W/M.K;
Absorbent: <0.04kg/Cm2;
Buring Speed: 50mm/Min;
|