| Specification |
Application: Aviation, Electronics, Industrial, Medical, Chemical;
Standard: ASTM;
Purity: >99.95%;
Alloy: Non-alloy;
Shape: Crucible;
Type: Tungsten Crucibles;
Name: Tungsten Crucible;
Density: 19.3G/Cm3;
Sample: Available;
Surface: Black, Chemical Cleaning and Polished Surfa;
Highest Temperature: 2400c;
|
Application: Industrial;
Standard: JIS, GB, DIN, AISI;
Purity: >98%;
Alloy: Alloy;
Shape: Round;
Type: Cemented Tungsten Carbide Rods;
Surface: Sintered;
Grinding: H6 Ground;
Produdction Method: Extrusion or Cold Isostic Pressing;
Length: Full Length 12", 13", 14", 300mm,310mm, 320,330;
Coolant Hole: 1 2 3 Coolant Holes, Sraight or Helical;
Tolerance: H4, H5, H6, H7 Standard;
Run-out: 0.05mm;
Grade: Submicron, Micron, Ultra Fine, Nano Grain Size;
Grinding Machines: Imported Centerless Grinding Machines;
Usage: End Mills, Drill Bits, Reamers, Taps, Punches;
|
Application: Industrial;
Standard: JIS, GB, DIN, AISI;
Purity: >98%;
Alloy: Alloy;
Shape: Round;
Type: Cemented Tungsten Carbide Rods;
Surface: Sintered;
Brazed or Not: Redi-Burrs with Shank;
Materials: C2, Rd10f, or Yg7;
Grade: Submicron, Micron, Ultra Fine, Nano Grain Size;
Harness: 90.5 to 91.5 Hra;
Grain Size: Medium Grain Size or Submicron;
Tolerance: DIN or ANSI Standard.;
Usage: for Making Solid Carbide Rotary Burs;
|
Application: Industrial;
Standard: JIS, GB, DIN, AISI;
Purity: >98%;
Alloy: Alloy;
Shape: Round;
Type: Cemented Tungsten Carbide Rods;
Surface: Sintered;
Grinding: H6 Ground;
Produdction Method: Extrusion or Cold Isostic Pressing;
Properties: Good Thoughenss and Harndess;
Coolant Hole: Double Hole, Kidney Hole, Single Hole;
Tolerance: H4, H5, H6, H7 Standard;
Category: Deep Hole Drill Bits;
Grade: Submicron, Micron, Ultra Fine, Nano Grain Size;
Grinding Machines: Imported Centerless Grinding Machines;
Usage: Solid Carbide Boring Bar Blank;
|
Application: Industrial;
Standard: JIS, GB, DIN, AISI, Cut to Length, ANSI DIN;
Purity: >98%;
Alloy: Alloy;
Shape: Round;
Type: Cemented Tungsten Carbide Rods;
Surface: Sintered;
Grinding: H6 Ground;
Produdction Method: Extrusion or Cold Isostic Pressing;
Length: Full Length 12", 13", 14", 300mm,310mm, 320,330;
Coolant Hole: 1 2 3 Coolant Holes, Sraight or Helical;
Tolerance: H4, H5, H6, H7 Standard;
Grade: Submicron, Micron, Ultra Fine, Nano Grain Size;
Grinding Machines: Imported Centerless Grinding Machines;
Usage: End Mills, Drill Bits, Reamers, Taps, Punches;
|
